先进战斗机气动弹性设计综述

中国新一代战斗机的研发引领了飞机设计领域各项技术的创新和发展。针对研制总要求和任务特殊性，中国航空工业成都飞机设计研究所气动弹性专业建立了精益气动弹性设计与验证技术体系。基于多学科优化设计流程，开展了旨在提高飞机气动弹性品质的关键技术攻关、气弹优化设计和分析工作。完成了考虑含全动翼面结构非线性的全机动力学特性地面试验、亚跨超声速颤振模型风洞试验和气动弹性飞行试验验证。在较短的研发周期内，成功实现气动弹性设计目标，为新一代战斗机的成功研制提供了技术保障。描述了该飞机气动弹性设计历程、主要技术工作以及在此基础上取得的技术进步、能力提升以及具有研究所特色的气动弹性设计知识工程建设。     

NiAl合金的热爆合成及其反应机制

本文研究了NiAl合金的热爆合成,其反应过程为液相控制,产物为β-NiAl,密度较高。本文给出了不同条件下合成的起爆时间及主要影响因素。     

一般高速数据总线网络的吞吐量分析

分析了一般高速数据总线网络优先权方案的特性，建立了一般ＨＳＤＢ网络多优先权的平均吞吐量模型，导出了不同优先权的平均吞吐量解析表达式，并通过软件仿真验证了由得到的解析表达式。     

颈动脉内血流动力学特征受向前加速度影响的数值模拟

人们在日常或某些特殊条件下常会面临方向和大小发生迅速变化的加速度环境,已有研究发现加速度环境会影响心血管系统生理、病理特征。利用计算机模拟方法详细研究了向前加速度环境下人体颈动脉内的血流动力学参数变化规律。结果表明:加速度会对颈动脉内压力、压力梯度、壁面剪切应力等与血管生理、病理现象密切相关的血流动力学参数产生显著影响。研究结果为加速度环境下颈动脉生理、病理研究提供了一定的理论依据,也为航空航天领域加速度环境下人员防护提供参考。      

超静超稳卫星碰振动力学建模

针对分离式卫星载荷模块(PM)受到扰动时可能与服务模块(SM)发生碰撞的问题，综合音圈电机反电动势(back-EMF)和柔性线缆动力学的效应，基于牛顿欧拉法建立了分离式卫星(DFP)载荷模块动力学模型。基于Hertz接触理论，推导了分离式卫星碰撞过程中连续接触力模型，并分析了碰撞过程中产生的接触力对载荷模块指向精度和指向稳定度的影响。数值仿真结果表明，碰撞使得载荷模块指向精度和指向稳定度下降5个数量级，碰撞后载荷模块可再次恢复到超静超稳工作状态，恢复时间超过1400 s。本文建立的碰撞模型对研究分离式卫星碰撞规避和碰撞控制具有重要意义。     

Ground experiments of Chang’e-5 lunar regolith penetrating radar

The Lunar Regolith Penetrating Radar (LRPR) is an Ultra-Wideband (UWB) array-based Ground penetrating radar (GPR) onboard the lander of Chang’e-5 (CE-5) mission. The primary scientific objectives of the LRPR are to probe the thickness and structure of lunar regolith of the landing site, and support the drilling and sampling process. In order to evaluate the performance of the LRPR, a series of ground experiments are performed using the LRPR prototype mounted on a CE-5 lander model. The performance of the LRPR is evaluated by comparing the experimental data with the simulated data. Data processing and imaging method are verified, and the interferences from the lander and other aspects are analyzed. The results of the ground experiments and simulation demonstrate that the LRPR is able to meet the design requirement of 2-m detection depth. They also indicate that the upper and lower interfaces of the stratified structure in the lunar regolith can be well distinguished by the LRPR when the dielectric constant difference is greater than 0.3, and the imaging effect of the location under the dense antennas is better than that of other positions. However, the identification capability of the LRPR to the independent blocky objects is relatively poor mainly due to the clutters caused by the lander, the sparsity of the antenna elements compared to the size of the basalt block, the limited aperture of the antenna array, and the tail of the transmitted waveform.     

Interference torque of a three-floated gyroscope with gas-lubricated bearings subject to a sudden change of the specific force

A numerical study is carried out to investigate the influence of a sudden change of the specific force on a three-floated gyroscope with a rotor supported on gas-lubricated bearings.The interference torque is calculated to evaluate the influence by modeling the transient behavior of the rotor-bearing system. In combination with dynamic equations of the rotor displacement,the Reynolds equation is solved on the surface of spiral-grooved conical bearings. It is assumed that a steady state has been obtained with a constant specific force, and then the specific force is suddenly changed and maintained constant after that. Responses of the sudden change are obtained by solving the equations. Numerical results show that the direction of the sudden change of the specific force is the main factor which influences the interference torque curve. With a sudden change along the input direction, the interference torque fluctuation has a constant frequency and a decreasing amplitude. With a sudden change along the output direction, the interference torque fluctuates in a small range. With a sudden change along the spin direction, the change of the interference torque combines a fluctuation and a gradually-changing quasi-equilibrium value. This study provides a supplement to the steady-state error model of the three-floated gyroscope.     

低轨卫星缺失时序数据的模式识别方法

在航天应用中，低轨卫星经常会由于原始数据缺失而影响卫星时序数据模式识别结果，降低准确率。针对该问题提出了一种新型MR-GRU模型，可有效处理缺失时序数据，并获得较好的模式识别准确率。区别于传统模型的补全缺失数据的方法，MR-GRU模型直接在缺失时序数据上运用循环神经网络进行训练，对传统门控循环单元结构进行了改进，增加了两个新变量：掩蔽项和衰减项。掩蔽项作用于输入，衰减项作用于输入和隐层单元输出。MR-GRU模型不仅能够保持时序数据固有的时间特性，还能有效提高模式识别精度。在卫星时序数据上的模式识别试验表明，MR-GRU模型准确率优于传统模型。     

Predicting performance in manually controlled rendezvous and docking through spatial abilities

Manually controlled rendezvous and docking (manual RVD) is a challenging space task for astronauts. This study aims to identify spatial abilities that are critical for accomplishing manual RVD. Based on task analysis, spatial abilities were deduced to be critical for accomplishing manual RVD. 15 Male participants performed manual RVD task simulations and spatial ability tests (the object-manipulation spatial ability and spatial orientation ability). Participants’ performance in the test of visualization of viewpoints (which measures the spatial orientation ability) was found to be significantly correlated with their manual RVD performance, indicating that the spatial orientation ability in the sense of perspective taking is particularly important for accomplishing manual RVD.