粗糙条件熵算法在故障诊断中应用分析

给出了一种基于条件熵的算法,并应用于弹载电子设备故障诊断中。结果表明,诊断结果准确可靠,且弥补了差别矩阵算法和差别函数算法的不足。     

推力室逆置点火瞬时真空舱流场数值与试验研究

针对高空模拟舱内逆向布置的推力室点火瞬时过程中舱内压力的变化规律进行了理论和数值仿真分析,推力室高速气流的动能是推力室短程点火过程中舱内压力大幅上升的主要原因.为保证推力室点火时舱内的真空度,需要在推力室出口配置导流装置将燃气导出真空舱.对单台和4台并联推力室进行点火试验,试验表明：采用燃气导流能够较好保持舱内真空度,是整机多推力室高空模拟试验的新思路.     

ANALYSIS OF AN ELECTROSTRICTIVE STACK ACTUATOR FOR ACTIVE TRAILING EDGE FLAPS

Helicopter is a complex dynamic system withmany rotating components. The rotor blades oper-ate in a highly complex aerodynamic environment.The vibratory hub load,which is caused by cyclicvariation ofcentrifugaland aerodynamic load of therotating bladesin flight,is transmitted to the fuse-lage,resulting in serious vibration and noise of thestructure. It is one of the most important excitingsources in helicopters.There has long been a desire to reduce heli-copter vibration and to improve its per…     

弹地人在回路末制导时延补偿改进模型

基于弹地通信链路的人在回路制导导弹利用惯性导航系统短时导航精度高的特点,对导弹末制导中导引指令的时间延迟提出了两种补偿模型及改进方法。通过Simulink仿真,得出距离和导引量与目标横向误差的关系及其方法改进后精度的提高幅度,并进行了分析。仿真结果验证了该方法的有效性。     

三维可调的高精度顶尖尾座

Ｇ４８数控坐标磨机床是由计算机数控的连续轨迹坐标磨机床，这类机床的控制装置能同时对２个或２个以上的坐标轴进行连续控制，属于两轴半坐标数控机床。该机床有１个数控转台，可以使用数控转台加工轴类零件，但需要顶尖尾座配合。为此我们通过借鉴国内外高精度顶尖尾座...     

Filament Thread-like Structures and Their?Small-amplitude Oscillations

Thanks to gradually improving observational capabilities, both from space and ground-based observatories, it is now generally accepted that thin threads (width ??200 km) constitute the building blocks of solar filaments and prominences. At ultra-small scales, high quality image sequences show a non-static picture of filaments and reveal that their oscillatory behavior is an important dynamic feature of these structures. Filament seismology sheds light on the internal magnetic structures of filaments and their interactions with surrounding solar regions. Understanding the overall magnetic topology of solar filaments and prominences including their small-scale thread-like structures is essential in interpretation and understanding of their oscillations. For this reason we aim here to present an update of the dynamic and spatial structures of prominences and filaments as inferred from high resolution observations in the past decennia. Some constraints in high resolution observations are addressed. Our review focuses mainly on the observational aspects and aims to summarize recent oscillation studies of individual filament threads and groups of threads. Finally, some theoretical interpretations of oscillations of filament threads and the inferred physical conditions of filament plasma are also discussed.     

ZCZ序列在舱内无线通信系统中的应用分析

依据飞船舱内通信的特点及未来的需求,首先探讨了传统CDMA系统、采用零相关区序列的新型CDMA系统在舱内无线通信中的应用,分析表明新型CDMA系统更加简单,可靠性更高,并从理论上分析了新型CDMA系统的抗符号间干扰和多址干扰的性能,最后给出了系统设计方案及性能仿真,仿真进一步验证了新型CDMA系统能大大降低或完全消除系统中的符号间干扰和多址干扰。     

歼×飞机攻角位置误差校准的试验研究

本文简述了目前歼×飞机的攻角位置校准的试验方法。通过分析比较 ,认为采用微波空间定位校准法进行攻角位置误差校准优于目前风洞试验校准法     

月面高温下推力器可靠性试验

嫦娥五号着陆上升组合体落月后将经历月昼强红外辐射环境，由于推力器喷管导热影响，使推进剂管路与电磁阀面临高温环境，推进系统存在管路内氧化剂汽化和推力器性能下降甚至无法正常工作的问题，影响上升器月面起飞正常姿态控制。为了研究高温下推力器的工作性能，进行了高温下氟塑料阀芯与氧化剂相容性调研，提出了电磁阀和推力器可靠性增长及可靠性验证试验方法，分析了温度与电磁阀阀芯行程的关系，获取了高温环境下推力器的稳态及脉冲工作性能，在小子样条件下评估了推力器可靠性置信下限及月面起飞上升推进系统可靠度，通过月面高温排气及月面起飞上升姿态控制对研究结果进行了航天器在轨飞行验证，圆满完成了上升器月面起飞上升任务。所提出的研究方法及思路具有很好的工程适用性。