学科间载荷参数空间插值传递方法

针对多学科优化分析中面面耦合学科网格间载荷传递的问题, 提出了在参数空间中的三次函数插值传递方法.该方法将三维空间的源学科载荷点投影到二维参数空间平面上, 用三次插值函数对目标点载荷进行计算.此方法解决了叶片表面弯曲对载荷传递精度的影响.某涡轮叶片温度传递的结果表明本文的方法具有很高的精度.      

The Radio Plasma Imager investigation on the IMAGE spacecraft

Radio plasma imaging uses total reflection of electromagnetic waves from plasmas whose plasma frequencies equal the radio sounding frequency and whose electron density gradients are parallel to the wave normals. The Radio Plasma Imager (RPI) has two orthogonal 500-m long dipole antennas in the spin plane for near omni-directional transmission. The third antenna is a 20-m dipole along the spin axis. Echoes from the magnetopause, plasmasphere and cusp will be received with the three orthogonal antennas, allowing the determination of their angle-of-arrival. Thus it will be possible to create image fragments of the reflecting density structures. The instrument can execute a large variety of programmable measuring options at frequencies between 3 kHz and 3 MHz. Tuning of the transmit antennas provides optimum power transfer from the 10 W transmitter to the antennas. The instrument can operate in three active sounding modes: (1) remote sounding to probe magnetospheric boundaries, (2) local (relaxation) sounding to probe the local plasma frequency and scalar magnetic field, and (3) whistler stimulation sounding. In addition, there is a passive mode to record natural emissions, and to determine the local electron density, the scalar magnetic field, and temperature by using a thermal noise spectroscopy technique.     

A modified Gaussian sum approach to estimation of non-Gaussiansignals

A Gaussian sum estimation algorithm has previously been developed to deal with noise processes that are non-Gaussian. Inherent in this algorithm is a serious growing memory problem that causes the number of terms in the Gaussian sum to increase exponentially at each iteration. A modified Gaussian sum estimation algorithm using an adaptive filter is developed that avoids the growing memory problem of the previous algorithm while providing effective state estimation. The adaptive filter is comprised of a fixed set of estimators operating in parallel with each individual estimate possessing its own corresponding weighting term. A simulation example illustrates the new non-Gaussian estimation technique     

A Concept of Position Fixing by a Passive Mode Navigation Satellite System

A position fix in a passive mode using satellites usually necessitates an expensive computer or lengthy hand calculation. This is the largest drawback of passive navigation and it would be more desirable if the user could find his position by a mere glance at a chart and table, as one uses Loran. The first step toward this goal is to use a synchronous satellite because it simplifies the problem. The next step is to find the position of the user by a Loran type of chart, which is universal, and correct this apparent position by looking at a special table which is made according to the amount of perturbation of both the satellite and the user's position. An example of the position fix along the route between Yokohama to Hawaii is shown. The concept can be extended to orbiting satellites due to the rules which govern the motion of satellites, if the fix accuracy is in the order of 2 to 5 miles. This method should be more accurate than the common sextant and more practical due to the fact that the satellite can be used at any time and in any weather. As a total system, it will be better than Omega because it could provide additional navigation information such as communication or traffic control by using satellites.     

一种新型多普勒噪声抑制技术对BepiColombo任务无线电科学实验的性能提升

在欧洲空间局和日本宇宙开发机构联合开展的BepiColombo水星任务中,将开展水星轨道器无线电科学实验,包括估计水星的引力场及其旋转状态,并对广义相对论进行验证。目前地面系统和星上设备的主流配置可以在无线电科学实验中建立X/X、X/Ka和Ka/Ka多个频段的链路,测速精度可达3 um/s（1 000 s积分）,测距精度为20 cm。提出了基于时延机械噪声对消技术提高无线电科学实验性能的方案。时延机械噪声对消技术需要处理在两个测站不同时刻的测量数据,一个测站实施双向多普勒测距,对另一个单收测站的要求较为严格,该测站需要具有较好的对流层条件。这种方法能够显著降低Ka频段双向链路的主要测量噪声,包括由对流层和天线机械系统震动引起的噪声。我们给出了端到端的仿真性能,并估计了在使用时延机械噪声对消技术前提下的水星引力场和旋转状态。考虑使用NASA位于美国本土戈尔德斯敦的DSS-25天线或欧空局位于阿根廷马拉圭的DSA-3天线作为双程测量站,并考虑使用位于智力的APEX天文观测天线作为单收站。分析结果表明在最好的噪声条件下,使用DSA-3天线作为双程测量站时,时延机械噪声对消技术可将待估计的全局和局部参数的估计精度提升一倍。对于无线电科学实验的目标,这一可能的性能提升对行星地质物理学很有意义,它将有益于研究水星内部的结构。     

New maximum entropy spectrum using uncertain eigenstructureconstraints

A number of modern spectral estimators are shown to have a common generic formulation. These include minimum variance, MUSIC, and maximum entropy. A new maximum entropy spectral estimator is derived using constraints on the modal powers or the expected-square projections of the data onto the eigenvectors of the data covariance matrix. The formulation incorporates uncertainty in the modal power constraints and the signal-versus-noise subspace separation. The resulting estimators have forms which incorporate all other modern estimators, including maximum entropy and minimum norm. The new estimators allow further development when a priori information is used in the constraints. Comparison of one version of the estimator with the minimum norm verifies the greater probability of resolution of the minimum norm but indicates in some instances the value of the incorporated uncertainties. Another version uses complex constraints and reduces to conventional maximum entropy or minimum norm under certain conditions     

基于虚拟仪器的航空电气控制盒测试系统设计与实现

介绍了一种基于虚拟仪器的航空电气控制盒测试系统的设计和实现,该系统是一种针对各类飞机电气控制盒的开放式的综合测试系统。对系统中主要硬件的设计和上层测试软件的设计思想做了相关讨论,同时阐述了整个测试系统的实现功能和方法。利用该综合测试系统,可以开发出各类飞机电气控制盒的测试系统,克服了以往测试设备只能测试一个产品的缺点,提高了测试准确度和效率。     

Gravity and perceptual stability during translational head movement on earth and in microgravity

We measured the amount of visual movement judged consistent with translational head movement under normal and microgravity conditions. Subjects wore a virtual reality helmet in which the ratio of the movement of the world to the movement of the head (visual gain) was variable. Using the method of adjustment under normal gravity 10 subjects adjusted the visual gain until the visual world appeared stable during head movements that were either parallel or orthogonal to gravity. Using the method of constant stimuli under normal gravity, seven subjects moved their heads and judged whether the virtual world appeared to move “with” or “against” their movement for several visual gains. One subject repeated the constant stimuli judgements in microgravity during parabolic flight. The accuracy of judgements appeared unaffected by the direction or absence of gravity. Only the variability appeared affected by the absence of gravity. These results are discussed in relation to discomfort during head movements in microgravity.     

Ground based ISS payload microgravity disturbance assessments

In order to verify that the International Space Station (ISS) payload facility racks do not disturb the microgravity environment of neighboring facility racks and that the facility science operations are not compromised, a testing and analytical verification process must be followed. Currently no facility racks have taken this process from start to finish. The authors are participants in implementing this process for the NASA Glenn Research Center (GRC) Fluids and Combustion Facility (FCF). To address the testing part of the verification process, the Microgravity Emissions Laboratory (MEL) was developed at GRC. The MEL is a 6 degree of freedom inertial measurement system capable of characterizing inertial response forces (emissions) of components, sub-rack payloads, or rack-level payloads down to 10(-7) g's. The inertial force output data, generated from the steady state or transient operations of the test articles, are utilized in analytical simulations to predict the on-orbit vibratory environment at specific science or rack interface locations. Once the facility payload rack and disturbers are properly modeled an assessment can be made as to whether required microgravity levels are achieved. The modeling is utilized to develop microgravity predictions which lead to the development of microgravity sensitive ISS experiment operations once on-orbit. The on-orbit measurements will be verified by use of the NASA GRC Space Acceleration Measurement System (SAMS). The major topics to be addressed in this paper are: (1) Microgravity Requirements, (2) Microgravity Disturbers, (3) MEL Testing, (4) Disturbance Control, (5) Microgravity Control Process, and (6) On-Orbit Predictions and Verification.     

Social desirability bias in personality testing: implications for astronaut selection

The assessment of personality is recognized by space agencies as an approach to identify candidates likely to perform optimally during spaceflights. In the use of personality scales for selection, the impact of social desirability (SD) has been cited as a concern. Study 1 addressed the impact of SD on responses to the Personality Characteristic Inventory(PCI) and NEO-FFI. This was achieved by contrasting scores from active astronauts (N=65) with scores of successful astronaut applicants (N=63), and between pilots applicants (N=1271) and pilot research subjects (N=120). Secondly, personality scores were correlated with scores on the Marlow Crown Social Desirability Scale among applicants to managerial positions (N=120). The results indicated that SD inflated scores on PCI scales assessing negative interpersonal characteristics, and impacted on four of five scales in NEO-FFI. Still, the effect sizes were small or moderate. Study 2 addressed performance implications of SD during an assessment of males applying to work as rescue personnel operations in the North Sea (N=22). The results showed that SD correlated negatively with cognitive test performance, and positively with discrepancy in performance ratings between self and two observers. In conclusion, caution is needed in interpreting personality scores in applicant populations. SD maybe a negative predictor for performance under stress.