High-Order Intermodulation Effects in Digital Satellite Channels

The phenomenon of intermodulation generation due to passive and normally linear components is sometimes called passive intermodulation. A unique characteristic of passive intermodulation interference in communications satellites is that the products causing trouble are of high orders. Due to the immense combinatorial complexity of the problem, both exact analysis and direct simulation are almost impossible. In this paper the problem is simplified by considering a composite interference model consisting of 1) the lowest order intermodulation product (of those high-order ones) at a frequency of interest, 2) a constant-envelope carrier with random phase to account for all other intermodulation interferences by direct overlap or spectrum spreading in the vicinity, and 3) white Gaussian noise (receiver noise). An approximation of the tail statistics of this composite interference is derived, and numerical results (checked by simulation) show that the tail distribution may be very different from Gaussian; careful consideration must be rendered before resorting to the a priori Gaussian assumption.     

The Lunar Gravity Ranging System for the Gravity Recovery and Interior Laboratory (GRAIL) Mission

The Lunar Gravity Ranging System (LGRS) flying on NASA’s Gravity Recovery and Interior Laboratory (GRAIL) mission measures fluctuations in the separation between the two GRAIL orbiters with sensitivity below 0.6 microns/Hz^1/2. GRAIL adapts the mission design and instrumentation from the Gravity Recovery and Climate Experiment (GRACE) to a make a precise gravitational map of Earth’s Moon. Phase measurements of Ka-band carrier signals transmitted between spacecraft with line-of-sight separations between 50 km to 225 km provide the primary observable. Measurements of time offsets between the orbiters, frequency calibrations, and precise orbit determination provided by the Global Positioning System on GRACE are replaced by an S-band time-transfer cross link and Deep Space Network Doppler tracking of an X-band radioscience beacon and the spacecraft telecommunications link. Lack of an atmosphere at the Moon allows use of a single-frequency link and elimination of the accelerometer compared to the GRACE instrumentation. This paper describes the implementation, testing and performance of the instrument complement flown on the two GRAIL orbiters.     

Deducing Electron Properties from Hard X-ray Observations

X-radiation from energetic electrons is the prime diagnostic of flare-accelerated electrons. The observed X-ray flux (and polarization state) is fundamentally a convolution of the cross-section for the hard X-ray emission process(es) in question with the electron distribution function, which is in turn a function of energy, direction, spatial location and time. To address the problems of particle propagation and acceleration one needs to infer as much information as possible on this electron distribution function, through a deconvolution of this fundamental relationship. This review presents recent progress toward this goal using spectroscopic, imaging and polarization measurements, primarily from the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI). Previous conclusions regarding the energy, angular (pitch angle) and spatial distributions of energetic electrons in solar flares are critically reviewed. We discuss the role and the observational evidence of several radiation processes: free-free electron-ion, free-free electron-electron, free-bound electron-ion, photoelectric absorption and Compton backscatter (albedo), using both spectroscopic and imaging techniques. This unprecedented quality of data allows for the first time inference of the angular distributions of the X-ray-emitting electrons and improved model-independent inference of electron energy spectra and emission measures of thermal plasma. Moreover, imaging spectroscopy has revealed hitherto unknown details of solar flare morphology and detailed spectroscopy of coronal, footpoint and extended sources in flaring regions. Additional attempts to measure hard X-ray polarization were not sufficient to put constraints on the degree of anisotropy of electrons, but point to the importance of obtaining good quality polarization data in the future.     

几种流体壁面剪切力测压管的性能研究

对四种壁画型流体剪切力测量差压计Ｓｔａｎｔｏｎ管，Ｋ型管，穴型管，及微孔表面差压管在湍流边界层条件下进行试验并对其结构特点进行比较后表明，这四种差压计具有相同的特征，所测量的区差均为流量动量变化所致，其流体剪切力可以表示为τ＝Ｃ△Ｐ￣ｎ，为避免对标定数据过于繁复的多段拟会，并使差压计能在较大测量范围内保持拟合公式的精度，各类差压管在与固体壁画铅垂方向上的尺度值应尽量低，微孔表面差压管结构复杂，灵敏度低，但它具有线性特性。     

Specification and Performance of Passive Sonar Spectral Estimators

The application of existing estimation theory to the problem of specification and performance of passive sonar spectral estimators is considered. The classification function is addressed, so that the signal is assumed to be present, and so that the energy arrival angle is known. The spatial filter considered is a line array of M equally spaced omnidirectional hydrophones. Signal and ambient noise are both zero-mean, wide-sense, stationary Gaussian random processes that differ in their spatial correlation across the face of the array. The signal is a plane wave that can be made totally spacially corrected between array elements by inserting delays between sensors to invert the signal propagation delay. The noise correlation is a function of frequency, bandwidth, element separation, and the relative time delay between sensors. Under these assumptions, the Cramer-Rao lower bound is derived for the class of unbiased estimates of signal power in a narrow frequency band at the hydrophone in the presence of correlated ambient noise of known power. The bound is examined numerically, resulting in a threshold phenomenon with M that constitutes a new design consideration. In addition, there is a striking insensitivity to realistic values of ambient noise correlation, and there are ranges in signal-to-noise ratio for which one gains more by increasing M than by increasing the bandwidth-time product. Specific processors, including a new unbiased estimator when noise power is unknown, are developed.     

Some early results of the keV plasma experiment on GEOS-1

Some preliminary new results are presented of the keV plasma experiment on GEOS-1. Electrons and ions have been observed to stream along the magnetic field lines in the dayside magnetosphere from the ionospheric side of the satellite towards the equatorial plane during magnetic storms, with streaming velocities corresponding to a kinetic energy of the order of a keV. The opposite streaming velocity has also been seen, but primarily in the ions only and with a smaller flux ratio for the two opposite directions along the field lines. The transition between the two opposite streaming directions, as seen by the satellite, has been found to occur even in a fraction of a second.In magnetic storm conditions azimuthal asymmetries in ion fluxes corresponding to electric field intensities of several tens of millivolts per meter have been observed.     

Radar Cross Section of Ships

A laboratory method to determine the magnitude and position of radar reflection sources on complex targets is described. In addition the method provides a way to measure the modification of the radar cross section (RCS) due to multipath. The method has application in modeling RCS for radar and electronic countermeasure (ECM) system performance analysis and in the study of the extent to which the signature of the target could be altered. The equipment described, termed MACROSCOPE, was developed for RCS studies by the U.S. Army and is described in limited distribution bution literature. The application to marine targets is new with this paper, as is the technique of measuring the RCS of parts of the target and analytically combining them to represent the whole. An illustration of the need for this type of laboratory equipment was illustrated by the extensive search for full scale data which could be compared to scale model data to validate the technique.     

On-Line Computer for Transient Turbine Cascade Instrumentation

A 32-channel computer based data acquisition and processing system em has been developed for use with the new type of transient cascade facility at Oxford. This is used for testing turbine blades and nozzle guide vanes at full-scale engine Reynolds and Mach numbers ers with correct wallto-flow temperature ratios. A novel technique for processing transient heat transfer data from thin film surface resistance thermometers has been developed. Measurements of surface ace pressure around blades, and of the upstream turbulence level have been made. The cascade and instrumentation are shown to have advantages both in cost and effectiveness over continuous running cascades.