Communications and radio determination system using twogeostationary satellites. I. System and experiments

We developed two types of hybrid terminals that can provide both satellite communication and position determination services in one system. One terminal uses the single channel per carrier (SCPC) technique and the other uses the spread spectrum (SS) technique. To evaluate the performance of the two systems, we carried out experiments in Japan and in the Pacific Ocean using two geostationary satellites, ETS-V (150°E) and Inmarsat (180°E). The ranging accuracy between the mobile terminals and the base station via the satellites was found to be about 200 m using the SCPC system and about 10 m using the SS system. The measured positioning accuracy was about 1 km in the SCPC system and about 600 m in the SS system when experiments were carried out near Japan. The experimental results show that the positioning errors were mainly caused by the orbital determination errors of the two satellites. Presented here are the configurations and features of the SCPC and SS terminals, the experimental system, and the experimental results     

Thermoelastic Stability of Closed Cylindrical Shell in Supersonic Gas Flow

In a linear framework, the problem of stability of closed cylindrical shell is briefly discussed. The cylin- drical shell is immersed in a supersonic gas flow and under the influence of temperature field varying along the thickness. An unperturbed uniform velocity flow field, directed along the short edges of the shell, is applied. Due to the inhomogeneity of the temperature field distribution across the thickness shell buckling instability occurs. This instability accounts for the deformed shape of the shell, to be referred as the unperturbed state. Stability con- ditions and boundary for the unperturbed state of the system under consideration are presented following the basic theory of aero-thermo-elasticity. The stability boundary depends on the variables characterizing the flow speed, the temperature at the middIe plane of the shell and the temperature gradient in the direction normal to that plane. It is shown that the combined effect of the temperature field and flowing stream regulates the process of stability, and the temperature field can significantly change the flutter critical speed.     

Determination of land surface temperature using precipitable water based Split-Window and Artificial Neural Network in Turkey

Land surface temperature (LST) calculation utilizing satellite thermal images is very difficult due to the great temporal variance of atmospheric water vapor in the atmosphere which strongly affects the thermal radiance incoming to satellite sensors. In this study, Split-Window (SW) and Radial Basis Function (RBF) methods were utilized for prediction of LST using precipitable water for Turkey. Coll 94 Split-Window algorithm was modified using regional precipitable water values estimated from upper-air Radiosond observations for the years 1990–2007 and Local Split-Window (LSW) algorithms were generated for the study area. Using local algorithms and Advanced Very High Resolution Radiometer (AVHRR) data, monthly mean daily sum LST values were calculated. In RBF method latitude, longitude, altitude, surface emissivity, sun shine duration and precipitable water values were used as input variables of the structure. Correlation coefficients between estimated and measured LST values were obtained as 99.23% (for RBF) and 94.48% (for LSW) at 00:00 UTC and 92.77% (for RBF) and 89.98% (for LSW) at 12:00 UTC. These meaningful statistical results suggest that RBF and LSW methods could be used for LST calculation.     

Calculation of fast neutron removal cross sections for different lunar soils

The interaction of galactic cosmic rays (GCRs) and solar energetic particles (SEPs) with the lunar surface produces secondary radiations as neutrons. The study of the production and attenuation of these neutrons in the lunar soil is very important to estimate the annual ambient dose equivalent on the lunar surface and for lunar nuclear spectroscopy. Also, understanding the attenuation of fast neutrons in lunar soils can help in measuring of the lunar neutron density profile and to measure the neutron flux on the lunar surface. In this paper, the attenuation of fast neutrons in different lunar soils is investigated. The macroscopic effective removal cross section (_ΣR)$({\mathrm{\Sigma }}_R)$ of fast neutrons was theoretically calculated from the mass removal cross-section values (_ΣR/ρ)$({\mathrm{\Sigma }}_R/\rho )$ for various elements in soils. The obtained values of (_ΣR)$({\mathrm{\Sigma }}_R)$ were discussed according to the density. The results show that the attenuation of fast neutrons is more important in the landing sites of Apollo 12 and Luna 16 than the other landing sites of Apollo and Luna missions.     

Stochastic processes for line shapes and intensities

Stochastic processes provide flexible and fast calculations for modeling dynamical interactions between an atom and charged particles. We use a stochastic renewal process for the plasma microfield being the cause of Stark broadening. The accuracy and improvement possibilities of Lyman profiles calculations with a renewal process are analyzed by comparing to ab initio simulations for ion broadening only. Stochastic processes may also be applied to out of equilibrium plasmas. We present our first results for the effect of Langmuir waves on a line broadened by electrons only, and for the changes of atomic populations submitted to strong temperature fluctuations.     

Nonlinear bending-torsion flutter experiments of a medium-aspect-ratio flexible wing model

In this research a two-motion medium-aspect-ratio straight flexible wing model was tested. Tests with the wing model were conducted in the subsonic wind tunnel of the Faculty of Aerospace Engineering at the Technion, Israel. Experimental results obtained for flutter and Limit Cycle Oscillations (LCO) of the wing model are presented. At least two types of flutter and postflutter LCO have been observed. Both types were characterized by coupling between the torsional and bending modes. The first type flutter was associated with coupling of the first bending and first torsional modes, whereas the second type was observed for coupling of the first torsional and second bending modes.     

Analysis of data of “Clementine” and “KAGUYA” missions and “ULCN” and “KSC-1162” catalogues

In this paper an analysis of data coordinate systems from selenographic catalogues and space missions was carried out. The lunar macrorelief models were made on basis of the software package ASNI USTU using method of the spherical harmonic expansion. These models accurately describe the global features of the lunar figure. To construct these models the following sources of topographic information were used: “Clementine” and “KАGUYА” (Selena, Japan mission) missions, “KSC-1162” (Kazan selenocentric catalogue), “Kiev” (selenodesic catalogue), “SAI” (Chuikova (1975)), “Bills, Ferrari”, “ULCN” (The Unified Lunar Control Network 2005). Direct comparison hypsometric information “KSС-1162” catalogue data with “Clementine” mission was carried out. These researches confirmed a good agreement of the hypsometric information of compared systems. The normalized coefficients were obtained on basis of the hypsometric information expansion for eight sources. The displacement of the lunar center of mass (LCM) relatively to the lunar center of figure (LCF) was obtained by using topographic data selenodetical catalogues and space missions.     

A debris image tracking using optical flow algorithm

This study proposes a motion detection and object tracking technique for GEO debris in a sequence of images. A couple of techniques (called the “stacking method” and “line-identifying technique”) were recently proposed to address the same problem. Although these techniques are effective at detecting the debris position and motion in the image sequences, there are some issues concerned with computational load and assumed debris motion. This study derives a method to estimate motion vectors of objects in image sequence and finally detect the debris locations by using a computer vision technique called an optical flow algorithm. The new method detects these parameters in low computational time in a serial manner, which implies that it has an advantage to track not only linear but also nonlinear motion of GEO debris more easily than the previous methods. The feasibility of the proposed methods is validated using real and synthesized image sequences which contain some typical debris motions.     

Observations of Magnetic Reconnection in the Magnetotail Associated With Substorms

Magnetic reconnection is one of the most important, dynamic phenomena in the magnetotail in terms of magnetic field line configuration change and energy release. It is believed to occur in the distant magnetotail mainly during southward interplanetary magnetic field periods and in the near-Earth magnetotail in association with substorms. In the present paper, we discuss several important issues concerning magnetic reconnection in the magnetotail associated with substorms, such as reconnection signatures, location, timing, spatial scale, and behavior, from the macroscopic, observational point of view.      

7A04铝合金壳体阳极氧化表面黑斑成因分析

7A04壳体零件表面阳极氧化处理后,模锻表面存在黑斑现象。本文采用S-3700N扫描电子显微镜(SEM)、能谱分析仪(EDS)等对表面黑斑进行成因分析。结果表明:模锻表面粗糙,存在大量凹坑,模锻过程中的润滑剂或氧化皮等外来物残留于凹坑处,影响阳极氧化膜层的生成而形成表面黑斑;黑斑底部阳极氧化膜层均连续,厚度比正常区域薄,仍可以起到一定的防护作用。在系统分析基础上,提出通过严格控制表面质量和模锻工艺,可以避免此类问题的产生。