Radio/FADS/IMU integrated navigation for Mars entry

Supposing future orbiting and landing collaborative exploration mission as the potential project background, this paper addresses the issue of Mars entry integrated navigation using radio beacon, flush air data sensing system (FADS), and inertial measurement unit (IMU). The range and Doppler information sensed from an orbiting radio beacon, the dynamic pressure and heating data sensed from flush air data sensing system, and acceleration and attitude angular rate outputs from an inertial measurement unit are integrated in an unscented Kalman filter to perform state estimation and suppress the system and measurement noise. Computer simulations show that the proposed integrated navigation scheme can enhance the navigation accuracy, which enables precise entry guidance for the given Mars orbiting and landing collaborative exploration mission.     

A study of GPS ionospheric scintillations observed at Shenzhen

Ionospheric scintillation variations are studied using GPS measurements at the low latitude station of Shenzhen (22.59°N, 113.97°E), situated under the northern crest of the equatorial anomaly region, from the Chinese Meridian Project. The results are presented for data collected during the current phase of rising solar activity (low to high solar activity) from December 2010 to April 2014. The results show that GPS scintillation events were largely a nighttime phenomenon during the whole observation period. Scintillation events mainly occurred along the inner edge of the northern crest of the equatorial anomaly in China. The occurrence of scintillations in different sectors of the sky was also investigated, and the results revealed that it is more likely for the scintillations to be observed in the west sector of the sky above Shenzhen. During the present period of study, a total number of 512 total electron content (TEC) depletions and 460 lock loss events were observed. In addition, both of these events are likely to increase during periods of high solar activity, especially because the strong scintillations are often simultaneously accompanied by TEC depletions and lock losses by GPS receivers.     

Switching and performance variations of on-orbit BDS satellite clocks

The information of the satellite clock switching and performance variations on-orbit of Chinese BeiDou-2 Navigation System (BDS) is not available for the public. In order to detect the BDS satellite clock switching and performances variation, we analyzed the precise clock offset products with a total duration of 5?years every BDS satellite equipped four atomic clocks from four different manufactures from January 2013 to October 2017. Three important contributions are concluded as follows. (1) It is found that the average time of on-orbit operation for BDS satellite clocks is about 1–2?years. There have been 22 times of clock switching for BDS satellites, of which the C05 and C08 satellites have been switched to the fourth (last) atomic clock. (2) There are frequent phase adjustments for BDS on-orbit satellite clocks, and the frequency series is relatively stable. Furthermore, there are semi-annual sinusoid cycles in the frequency drift series of C06 and C09 satellites. (3) The performances of MEO satellite clocks perform better than the IGSO and GEO satellite clocks. The average ten-thousand frequency stability of BDS satellite clocks is about 1E-13, which is worse than that of GPS and Galileo but better than that of GLONASS.     

Improving regional ionospheric TEC mapping based on RBF interpolation

Radial basis function (RBF) interpolation with multi-quadric is developed to perform ionospheric total electron content (TEC) mapping for the Chinese region between 15°N ~ 40°N and 100°E ~ 125°E. TEC measurements from the Centre for Orbit Determination in Europe (CODE) covering the solar maximum year 2011 are used to investigate the performance of the proposed RBF interpolation method. The differences between the RBF interpolated TEC and the CODE TEC are within 0.5 TECU and the root mean square error (RMSE) is very small when 49 data points are used. The maximum difference is ~5 TECU and the error is less than 1 TECU with 25 samples. Our study suggests that a random distribution of measurement points gives smaller RMSEs than a homogenous distribution when the number of sample points is low. The study indicates that RBF interpolation offers a powerful and reliable tool for ionospheric TEC mapping.     

In-orbit operation and performance of the CubeSat Soft X-ray polarimeter PolarLight

PolarLight is a compact soft X-ray polarimeter onboard a CubeSat, which was launched into a low-Earth orbit on October 29, 2018. In March 2019, PolarLight started full operation, and since then, regular observations with the Crab nebula, Sco X-1, and background regions have been conducted. Here we report the operation, calibration, and performance of PolarLight in the orbit. Based on these, we discuss how one can run a low-cost, shared CubeSat for space astronomy, and how CubeSats can play a role in modern space astronomy for technical demonstration, science observations, and student training.     

Analysis of the solar sail deformation based on the point cloud method

The deformation of the solar-sail membrane is an important factor for causing inaccuracies in the solar-sail missions. This paper describes the solar sail under deformation by using a new modelling technique based on point cloud and triangular mesh generation. Two types of deformation, stemming from wrinkling and billowing, are modelled. The changes in the solar radiation pressure force and the moment caused by deformation are calculated and compared to the ideal non-deformed case. The heliocentric spiral trajectory and the orbital angular momentum reversal trajectory are taken as examples to quantify the influence of the deformation from an orbit point of view. Additionally, point cloud simplification, based on the normal vector and bounding box, is utilized to simplify the original deformed-sail model. It involves a reasonable reduction and renewal of the points in the model considering the variation of surface curvature. The simplification and its modelling accuracy are numerically investigated as well as computational efficiency.     

An Empirical Study of the Effect of Metacognitive Strategy Instruction on Listening Comprehension

The paper tries to apply meta-cognitive strategy training to English listening comprehension teaching. It also aims at helping students choose appropriate meta-cognitive strategies to accomplish specific listening tasks, which may hopefully facilitate students' listening comprehension. Data analysis proves that strategy training helps improve students' listening comprehension.     

Robust Design of Supercritical Wing Aerodynamic Optimization Considering Fuselage Interfering

Robust optimization approach for aerodynamic design has been developed and applied to supercritical wing aerodynamic design. The aerodynamic robust optimization design system consists of genetic optimization algorithm, improved back propagation (BP) neural network and deformation grid technology. In this article, the BP neural network has been improved in two major aspects to enhance the training speed and precision. Uniformity sampling is adopted to generate samples which will be used to establish surrogate model. The testing results show that the prediction precision of the improved BP neural network is reliable. On the assumption that the law of Mach number obeys normal distribution, supercritical wing configuration considering fuselage interfering of a certain aerobus has been taken as a typical example, and five design sections and twist angles have been optimized. The results show that the optimized wing, which considers robust design, has better aerodynamic characteristics. What's more, the intensity of shock wave has been reduced.     

Trajectory Planning Algorithm Based on Quaternion for 6-DOF Aircraft Wing Automatic Position and Pose Adjustment Method

 A 6-degree of freedom (6-DOF) aircraft wing position and pose automatic adjustment method is presented to improve ARJ21 wing-fuselage connection precision and efficiency. Wing position and pose are adjusted by three pillars which are driven by six high-precision servo motors. During the adjustment process, wing is tracked and positioned by laser tracker. Wing initial posi-tion and pose are calibrated by using the measurement coordinates of assembly reference points. Wing target position and pose are calculated according to wing initial, fuselage position and pose, and relative position and pose requirements between wing and fuselage for the connection. Combining Newton-Euler method with quaternion position and pose analyzing method, the inverse kinematics of servo motors, together with the adjustment system dynamics is obtained. Wing quintic polynomial trajec-tory planning algorithm based on quaternion is proposed; the initial, target position and pose need to be solved and the inter-mediate moving path is uncertain. Simulation results show that the adjustment method has good dynamic characteristics and satisfies engineering requirements. Preliminary engineering application indicates that ARJ21 wing adjustment efficiency and precision are improved by using the proposed method.