基于参数化分析的柔性后缘优化设计

介绍了一种自适应柔性机翼后缘变形控制优化设计方法,该方法采用了由单个驱动器驱动的单块式分布柔性结构。该方法的关键在于设计一种合适的柔性后缘结构拓扑形式,使该自适应柔性机翼后缘能够达到精确的变形。阐明了柔性结构拓扑优化设计的数学模型,针对自适应柔性机翼后缘概念设计提出了基于参数化分析的拓扑优化设计方案,并进行了工程化圆整和尺寸优化。最终,通过非线性有限元分析和功能测试,验证了本文提出的柔性后缘优化设计方法的合理性。     

A coupling VWM/CFD/CSD method for rotor airload prediction

A coupling fluid-structure method with a combination of viscous wake model(VWM),computational fluid dynamics(CFD) and comprehensive structural dynamics(CSD) modules is developed in this paper for rotor unsteady airload prediction. The hybrid VWM/CFD solver is employed to model the nonlinear aerodynamic phenomena and complicated rotor wake dynamics;the moderate deflection beam theory is implemented to predict the blade structural deformation; the loose coupling strategy based on the ‘delt method' is used to couple the fluid and structure solvers.Several cases of Helishape 7A rotor are performed first to investigate the effect of elastic deformation on airloads. Then, two challenging forward flight conditions of UH-60 A helicopter rotor are investigated, and the simulated results of wake geometry, chordwise pressure distribution and sectional normal force show excellent agreement with available test data; a comparison with traditional CFD/CSD method is also presented to illustrate the efficiency of the developed method.     

电动力缆绳离轨系统中绳索建模研究

 空间碎片对在轨运行航天器的安全构成重大威胁,使废弃卫星脱离原轨道进入大气层烧毁是减少空间碎片的有效途径。利用导电缆绳与地磁场相互作用产生的洛仑兹力使卫星特别是低地球轨道卫星的轨道高度快速衰减是一种很有应用前景的离轨方式。在研究电动力缆绳离轨的刚性杆模型基础上,建立了更符合电动力缆绳特性的柔索模型,并对刚性杆模型和柔索模型进行仿真。结果表明柔索模型能更精确地体现电动力缆绳的性质。     

机动目标拦截末制导状态估计器的误差特性

 针对大机动目标拦截问题,分析了末制导阶段目标机动条件下状态估计器的误差特性。首先将目标机动输入未知时的状态估计器模型表示为一随机线性混合系统,当混合系统的模式跳变事件满足可观测性条件时,模式决策过程可等效为真实模式的延迟;随后推导了模式决策延迟条件下估计误差的动态方程与传递函数,并得到了一定误差要求下模式决策延迟的上界与目标机动模式逗留时间的下界;最后通过空空导弹拦截高速战机的典型实例验证了该理论分析的正确性。研究结果为设计此类线性混合系统估计器提供了理论依据。     

一种环境探测球形移动机器人的运动控制

 球形移动机器人具有结构紧凑、运动灵活等特点,在环境探测等应用领域具有独特优势。介绍了一种新型的、带有双摄像头的环境探测球形移动机器人BHQ-2的结构与运动原理,并对其运动控制问题进行了研究。由于该球形机器人属于非完整约束系统,其不存在位置级的运动学逆解,因此从速度级上讨论了它的运动控制问题。基于旋量理论推导了该球形移动机器人的速度雅可比矩阵,采用广义逆的解法求得了它的速度逆解,并采用可控性李代数证明了BHQ-2球形移动机器人系统是满秩的,因此该机器人系统是完全非完整的并且是可控的。基于运动学速度逆解对BHQ-2球形移动机器人进行了直线和圆形运动轨迹的仿真和实验,仿真和实验结果验证了该球形机器人的可控性及速度逆解的正确性。     

Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.     

Aviation-oriented Micromachining Technology-Micro-ECM in Pure Water

This article proposes a precise and ecofriendly micromachining technology for aerospace application called electrochemical machining in pure water （PW-ECM）. On the basis of the principles of water dissociation, a series of test setups and tests are devised and performed under different conditions. These tests explain the need for technological conditions realizing PW-ECM, and further explore the technological principles. The results from the tests demonstrate a successful removal of electrolytic slime by means of ultrasonic vibration of the workpiece. To ensure the stability and reliability of PW-ECM process, a new combined machining method of PW-ECM assisted with ultrasonic vibration （PW-ECM/USV） is devised. Trilateral and square cavities and holes as well as a group of English alphabets are worked out on a stainless steel plate. It is confirmed that PW-ECM will be probably an efficient new aviation precision machining method.     

一种非链式非完整球形机器人的反步轨迹跟踪控制器(英文)

Spherical robot has good static and dynamic stability, which provides it with strong viability in hostile environment, but the lack of effective control methods has hindered its application and development. This article deals with the dynamic trajectory tracking problem of the spherical robot BHQ-2 designed for unmanned environment exploration. The dynamic model of the spherical robot is established with a simplified Boltzmann-Hamel equation, based on which a trajectory tracking controller is designed by using the back-stepping method. The convergence of the controller is proved with the Lyapunov stability theory. Numerical simulations show that with the controller the robot can globally and asymptotically track desired trajectories, both linear and circular.     

一种新的微细精密航空制造技术—纯水微细电解加工的工艺研究(英文)

为了寻求航空精密微细制造新技术并实现绿色制造和精密微细制造,对一种新型微细电解加工方法——纯水微细电解加工进行了研究。基于水解离机理,在新研制的试验装置上,采用不同的试验条件,进行了一系列工艺试验,探索并揭示了实现纯水微细电解加工的必要工艺条件和工艺规律,加工了圆孔和字母"PW-ECM";还研究了超声振动—纯水电解复合加工新方法,进而在不锈钢薄片上加工出三角、方形盲孔、三角通孔;试验研究结果证明了纯水微细电解加工的可行性。     

颗粒两相流自由剪切层大涡模拟

采用大涡模拟(LES)方法数值仿真了可压缩流自由剪切层内颗粒两相流流场结构.气相控制方程采用二维盒式滤波法滤除小于网格尺度的小涡以得到LES控制方程,而流场中小涡对大涡的影响采用K-ωSST湍流模型模拟.在Lagrange坐标系下用颗粒轨道模型仿真颗粒运动,用双线性插值方法实现Euler坐标系到肌Lagrange坐标系的转换,并考虑了颗粒速度和温度的改变对气相流场的反作用.分析了仿真结果中气相自由剪切层的涡结构特性,不同St数颗粒在流场中的运动特性,颗粒对流场的反作用效果,得到了合理的结论.