多重直扩信号的快速捕获

多重直扩信号的快速捕获得卫星定位及通信系统研制过程中遇到的一个主要课题，它的实现，不仅可以提高系统的多址能力，而且也是系统实现的必备条件，本文阐明了多重直扩信号的来源以及可被分离的理论依据，给出了多重直扩信号快速捕获的硬件实现方案及部分实验结果，得出了一些重要结论。     

地下建筑物结构裂缝控制

有效控制由于变形作用 (水化热、混凝土干缩和气温温差 )引起的结构裂缝 ,进而防止工程结构的裂漏通病 ,是一个普遍关注的技术难题。本文以广州市滨江东路隧道等工程为实例 ,从结构设计、结构与基础的共同作用、施工技术、材料优选、环境条件及信息化施工等方面 ,介绍有效控制地下结构裂缝的对策和措施     

一个飞机结构优化设计软件

本文根据有限元分析基础,研究薄壁结构在应力、位移、最小尺寸约束下结构最轻重量的优化设计问题。用Kuhn-Tucker(库恩-塔克)必要条件将多个位移约束简化为单一位移约束(称为最临界位移约束),建立位移约束下的优化设计准则.从而避免大批拉格朗日乘子的计算,并结合满应力优化设计准则,形成了在有效约束界面逐步逼近最优设计点的方法——包络法。用某型飞机后机身一段优化设计作为本文的实际应用,得到令人满意的结果。     

应用聚类分析对关联规则进行分组

关联规则是要从大量的数据中找到数据之间的规律，但有时所产生的规律十分繁多，从而形成新的知识管理问题。针对该问题本文提出了一个新的算法，该算法利用系统聚类分析方法对规则进行分组，从而可更好地帮助用户解所发现的规律，该方法的距离（RatioD）是基于关联规则本身，因此，可对规则进行高效地分组。实验结果表明，该算法是有效的。     

角分集ISAR高分辨成像

对不同视角雷达回波进行融合可以形成大的相干积累角,显著增强雷达空间监控能力。给出一种角分集(制)信号融合成像方法,对于角分集(制)回波方位向存在大的间隔,首先将每一距离单元方位向有效稀疏孔径数据排列组合成一Hankel矩阵,由参数化方法估计一维信号参数,再由估计得到的参数对空缺部分预测填补,对每个距离单元横向补全后,压缩得到二维图像。该方法克服了以往预测方法的不足,能有效用于方位向稀疏孔径预测外推,最终仿真与实际数据处理结果证实结论。     

分集接收机鉴相算法研究与设计

从介绍分集接收机的基本工作原理入手,着重论述分集接收机中差模环的两种鉴相算法,并给出两种算法在使用FPGA实现时的资源占用情况,最后介绍了两种算法在实际工程中的应用。     

How we will go to Mars

This article studies the efficiency of ejecting waste generated by the life support system (LSS) of a manned spacecraft to reduce initial mass on low earth orbit. The spacecraft is used for a long-duration interplanetary mission and is equipped with either a chemical or a nuclear-thermal propulsion system. For this study we simulate an optimal control problem for a given spacecraft maneuver. An impulsive approximation of the optimal interplanetary spacecraft trajectory is assumed, which allows us to reduce the general optimal control problem to hierarchic structure of 'outer' and 'inner' subproblems. This structure is analyzed using the Pontryagin's Maximum principle. Numerical results, illustrating the efficiency of waste ejection are shown for typical Earth-Mars transfer trajectories. This results confirm in theory that using a waste ejection system makes an early manned Mars mission possible without having to design and build new, advanced biological LSS.     

低地球轨道环境原子氧对航天器表面材料聚酰亚胺作用的数值模拟

在建立数学物理模型的基础上，对氏地球轨道环境和地面实验环境下，有无保护层的聚酰亚胺所受原子氧冲蚀作用进行了进行了成功的数值模拟，获得了具有工程应用价值的数值计算结果，并讨论了数学物理模型中各参数对基蚀曲线形状的影响。从数值模拟结果和美国太空实验结果的比较可以看出，本文数据模拟的结果是正确的。该项工作对航天器的设计具有重要指导意义。     

The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994–1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.     

复合材料壳体与喷管的卡环连接结构研究

较详细地对复合材料壳体与喷管卡环连接结构进行了有限元应力,应变分析,对卡环,接头及倒锥等多体接触问题进行研究;对“Ｉ”型及“Ｌ”型卡环结构分别进行了计算和比较,并给出计算结果及结果分析。