高强度钢在马氏体点以下的贝氏体转变

许多高强度结构钢中都发现有马氏体开始转变点以下的贝氏体转变现象。综合使用膨胀法、导磁率法和金相硬度法测定了12CrNi3A,12Cr2Ni4A,30CrMnSiA和32Cr2MolVA等4种高强度钢在300℃左右等温时,在已转变的绝热马氏体存在的条件下发生的等温贝氏体转变。而且,已存在的马氏体量愈多,则随后发生的贝氏体转变时问愈短;证实马氏体有诱发贝氏体转变的效果。膨胀法与导磁率法对研究钢在马氏体开始转变点以下的贝氏体等温转变是十分有效的工具。     

Halo轨道转移及中途修正问题研究(英文)

This article addresses the design of the trajectory transferring from Earth to Halo orbit, and proposes a timing closed-loop strategy of correction maneuver during the transfer in the frame of circular restricted three body problem （CR3BP）. The relation between the Floquet multipliers and the magnitudes of Halo orbit is established, so that the suitable magnitude for the aerospace mission is chosen in terms of the stability of Halo orbit. The stable manifold is investigated from the Poincar6 mapping defined which is different from the previous researches, and six types of single-impulse transfer trajectories are attained from the geometry of the invariant manifolds. Based on one of the trajectories of indirect transfer which are ignored in the most of literatures, the stochastic control theory for imperfect information of the discrete linear stochastic system is applied to design the trajectory correction maneuver. The statistical dispersion analysis is performed by Monte-Carlo simulation,     

Plasma Niobium Surface Alloying of Pure Titanium and its Oxidation at 900℃

A niobium-modified layer on pure titanium surface was obtained by means of double glow plasma surface alloying technique. The modified layer was uniform, continuous, compact and well adhered to the substrate. The niobium composition in the modified layer decreased gradually from the surface to the substrate. The oxidation behavior of the niobium-modified layer was investigated and com- pared with the untreated surface at 900 ℃ for 100 h. Characterization of the layers was performed using X-ray diffraction and scanning electron microscope, respectively. The test results show that the oxidation behavior of pure titanium was improved by niobium alloying process. Niobium has a positive influence on the oxidation resistance.     

阻燃电缆技术发展与其标准规范

指出目前国内外电缆技术存在的阻燃问题及其防范措施,结合欧、美等国家的先进做法,从电缆用材料和不同绝缘材料的阻燃对比等方面,分析研究了阻燃电缆技术的发展情况及其标准规范评定的问题,以及其标准规范制定应重视的主要技术内容.     

热喷涂层的加工技术

热喷涂层由于其优异的高硬、耐磨、防腐等特性得到了广泛的应用,但如何优质、高效、低损耗地对其加工一直是困扰人们的难题。本文较为详细介绍了国内、外目前在热喷涂层加工方面的研究进展,存在的问题,各种加工方法的优缺点及适用范围。     

平面扇形可倾瓦推力轴承性能的研究

可倾瓦推力轴承的最佳支承位置决定了该轴承具有最佳的性能。为了准确确定平面扇形可倾瓦推力轴承的最佳支点位置,本文分析了离心力效应,提出了何时考虑离心力效应的判据和出现空穴现象的判据,较系统地给出了处于最佳支点位置的平面扇形可倾瓦推力轴承的性能计算线图。     

一种新型燃速催化剂的作用效果研究

合成了一种新型二茂铁化合物—1,1—双(三甲基硅氧乙基)二茂铁,并研究了这种化合物对AP/HTPB复合推进剂燃烧性能、力学性能以及工艺性能的影响。实验结果表明,这种化合物具有改善推进剂燃烧性能和力学性能的双重作用。     

微波带通滤波器的时域分析法研究

文章介绍了一种利用微波带通滤波器的时域反射损耗(即S11)曲线分析和调试滤波器的方法,运用此法在调试滤波器时可以快速地分析出具体是哪一个谐振电路或耦合器需要调试,以便对其进行专门的修正和调试,从而节省调试时间,简化调试过程。同时也介绍了3种方法作为把频域数据转换为时域数据的理论基础,即傅里叶级数法、快速傅里叶变换法和Chirp-z变换法,并对这3种方法作了相应的评价。     

高机动型高度差传感器的飞行过载性能分析

本文根据传感器机裁机动飞行试验情况,从离心过载性能分析着手,着重讨论传感器在高机动过载条件下可靠工作的因素.通过工程性分析与计算,论证了传感器的机载飞行性能。并从工程角度出发,为完善传感器的改装措施提供了分析论据。