热防护系统的硅纤维隔热层复合传热数值计算

鉴于热防护系统的硅纤维隔热层是各向异性的非灰体材料，其复合传热计算是复杂且耗时的，提出了一种简便方法用于硅纤维这类各向异性非灰体材料的复合传热计算。该方法借鉴了医学领域断层摄影法（局部X射线检测法）中对光沿各向异性散射介质传播分析的思路，得到了各向异性扩散的热辐射方程（RTE—D）并把该方程用于求解非灰体半透明介质的辐射热通量。计算结果与文献中基于辐射传递方程（RTE）求得辐射热流的复合传热数值结果相比较，其最大相对误差为1．5％，并且其计算时间也由Pentium Ⅱ的3297．66分钟缩短为PentiumⅣ的约5分钟。最后，该方法被用于真实热环境下刚性隔热瓦L1900（高空隙率硅纤维隔热材料）的复合传热计算，计算结果与实验数据有较高吻合度。数据结果表明，各向异性的扩散近似被用于求解非灰体半透明介质的辐射热通量的方法用在热防护系统的硅纤维隔热层复合传热数值计算中是简便高效的。     

GPS total electron content and surface latent heat flux variations before the 11 March 2011 M9.0 Sendai earthquake

The present paper describes the variations of the GPS total electron content (TEC) from the International GNSS service network and surface latent heat flux (SLHF) from the Scientific Computing Division of the National Center for Atmospheric Research (NCAR) before the 11 March 2011 M9.0 Sendai earthquake, respectively. The analysis shows pronounced enhancements in the GPS TEC and SLHF a few days prior to the earthquake event. The maximum increase in the GPS TEC was about 30 TECu with an extended spatial distribution on a geomagnetically quiet day (Dst ? −20 nT, between two moderate geomagnetic storms), 8 March, 3 days prior to the earthquake. This giant positive disturbance was possibly associated with the impending disastrous earthquake and contributed from the enhanced solar radiation. Moreover, there were several anomalous regions of SLHF on the global map, but an area of enhanced SLHF very close to the epicenter. The purpose of this paper is to report the existence of the changes in surface and ionosphere, and show the potential application of multi-source data to identify seismic precursors.     

Surface shape control of integrated paraboloid space reflector consisting of sub-reflectors exploiting modulated solar pressure

Reflectors are very critical space elements and can be used not only as solar collectors/reflectors, telecommunication radio antennas and telescopes but also for dual-usage such as solar sails and solar concentrators to probe and sublimate materials from asteroids when actively controlling the surface shape. In this paper, the surface shape of a slack reflector with negligible elastic deformations will be controlled to be a paraboloid by actively modulating the solar radiation pressure (SRP) force using reflectivity control devices (RCDs) across the reflector. Nonlinear static equilibrium equations for an arbitrary infinitesimal within the reflector along the radial, circumferential and transverse directions are established considering the external modulated SRP force and internal tensions respectively. The coupled radial stress differential governing equation and reflectivity algebraic equation are obtained for the paraboloid reflector by the help of the formulation of an inverse problem based on equilibrium equations previously established. Some analytical and numerical analysis for reflectors with ideal and non-perfect SRP force models are performed respectively. The conclusions concerning about how to control the reflector’s surface shape successfully using allowed reflectivity, resulting in reasonable stress range, moreover, how to get the feasible solutions influenced by the reflector’s size parameters, are all based on the presented analytical and numerical analysis.     

CFCC的几种声学参量表征方法比较

化学气相渗透(CVI)制备的CFCC的质量控制非常困难。研究该材料质量的无损检测方法对材料使用及性能表征等都具有重要意义。针对声衰减严重的问题,采用穿透法测量各声学参量,用声速、衰减、非线性等相关参量评价材料的均匀性,同时用金相法进行对比测试。结果表明:声速、衰减、非线性等参量可准确地评价材料均匀性,其中声速评价是最成熟的表征方法。     

Anomalous enhancement of electric field derived from ionosonde data before the great Wenchuan earthquake

The seismo-ionospheric coupling is a hot topic of modern scientific research. One of the most reasonable mechanisms is the hypothesis of quasistatic electric field. With a preliminary analytical method, electric field in F2-region before Wenchuan earthquake was derived from the five lower latitude ground-based ionosondes: Lhasa (29.63°N, 91.17°E), Chongqing (29.50°N, 106.40°E), Kunming (25.00°N, 102.70°E), Guangzhou (23.15°N, 113.35°E) and Haikou (23.15°N, 110.35°E). The results show that there was an anomalous enhancement of electric field in F2-region close to the epicenter with maximal amplitude ∼2 mV/m (about 10 times of the background) at 15:00 LT on 9 May, which is in line with the amplitudes of anomalous electric field related to some previous earthquakes observed by satellites.     

大型购物中心疏散时间预测方法的对比研究

以建筑性能化防火设计为依据，以保证人员在火灾中安全疏散为目标，以环境可提供的（或者说人员可利用的）疏散时间ASET大于人员安全疏散所必需的时间RSET为原则，以某大型购物中心为例，通过日本手算法与常用的人员疏散软件SIMULEX模拟结果进行对比，分析两者在应用上的可行性。     

利用OpenGL显示叶轮造型及模拟加工

分析了OpenGL编程原理以及OpenGL与Windows图形设备接口GDI之间的关系,介绍了OpenGL进行叶轮造型显示及虚拟加工的应用方法.     

NOVEL HIGH-SPEED FPGA-BASED FFT PROCESSOR

A novel architecture for computing the fast Fourier transform ( FFT ) on programmable devices is presented.To improve the system operation speed , a hybrid parallel FFT algorithm is used.Results indicate that the use of an 8×8parallel structure for realizing the 64-point FFT leads to a 8times higher processing speed compared with its counterparts employing other series of techniques.     

对直升机齿轮齿根应力分布规律的研究

本文不但指出并纠正传统齿轮齿根应力分析中的错误及不妥，而且还提出一组可确定直升机齿根剖面上正应力、剪应力以及主应力等分布规律的解析表达式。