航天器分布式系统仿真验证平台设计与实现

文章分析了航天器分布式系统仿真平台的特点和需求,根据分布式集成仿真平台多操作系统、混合架构、分布式结构、模型管理、试验设计、仿真运行、数据管理的技术特点和功能需求,对相应关键技术进行了攻关,制定了实施方案,在此基础上完成了相关设计和实现。平台能够适应全数学与半物理2种仿真工况,满足航天器系统方案设计全面仿真验证需求,并可方便接入商业或自研软件。最后通过仿真实例对平台的功能性能及通用性进行了验证。     

航天领域常用聚四氟乙烯性能试验研究

聚四氟乙烯因其具有优异的特性,在航天领域有着广泛的应用。文章对SFB-2、M-12、M-111、4FT-6这4种航天领域常用聚四氟乙烯材料的摩擦性能和压缩变形特性进行试验研究:50 N载荷下它们的磨损率分别为1.21×10-4、1.39×10-4、1.32×10-4、1.19×10-6 mm3/(N·m);而13.7 MPa压缩载荷作用下的压缩变形量依次为7.0%、6.1%、3.3%、3.3%。表明不同厂家、不同牌号聚四氟乙烯的摩擦性能和压缩变形特性存在显著差异,在进行产品设计、材料选型时必须因材施用。     

航天器材料的空间应用及其保障技术

随着对应用卫星长寿命、高可靠要求的不断增长,对于航天器材料的空间应用可靠性及其保障技术日益受到重视。文章分析了航天器材料空间应用的要求及其空间环境效应试验评价技术,介绍了航天器材料保障技术的进展和发展趋势。在地面严格控制材料空间应用的性能并提供基于空间环境效应的充分数据是保障高品质航天器长寿命高可靠的重要手段。     

亚洲10大枢纽机场运营绩效预测研究

提高机场未来运营绩效是可持续发展的关键,对其进行准确预测是改善机场运营绩效的基础。考虑到突发事件的影响,单纯定量预测存在预测失真问题,本文采用定性定量结合分析法预测亚洲 10 大枢纽机场“十四五”期间的运营绩效,对比灰色模型定量分析法和 ARIMA 模型的预测结果,并对机场运营绩效预测结果进行分析。结果表明：灰色模型定量分析法比 ARIMA 模型更适合预测机场运营绩效;与实际统计值相比,灰色模型预测的误差都小于 4%,预测精度较好;采用定性定量结合分析法得到了机场未来运营绩效预测的结果,比单纯定量预测更符合实际情况。     

Particle deposition patterns on high-pressure turbine vanes with aggressive inlet swirl

Characteristics of particle migration and deposition were numerically investigated in presence of aggressive swirl at the turbine inlet. The isolated effects of the inlet swirl were considered in detail by shifting the circumferential position of the swirl and by implementing positive and negative swirling directions. Particles were released from the turbine inlet and the resulting deposition on the vanes was determined by using the critical velocity model in a range of particle diameters from 1...     

人际关系与心理卫生

人的社会性决定了人必须生活于广泛的人际关系网中,从中获得物质需要和精神需要。人际关系的广泛性和复杂性,对人的心理健康产生了深刻而持久的影响。“人类的心理适应,最主要的就是对于人际关系的适应,所以人类的心理病态,主要是由于人际关系的失调而来。”人际关系问题是心理卫生学研究和实践的重要课题之一。     

小波分析在直接吸收谱信号分析中的应用

采用小波分析方法对直接吸收谱信号进行消噪处理,通过对信号的高、低频部分进行分离实现了噪声消除。采用这种方法对近红外波段的DFB(分布反馈)半导体激光器所发出并且经由气室吸收、数据采集等步骤产生的直接吸收信号进行噪声消除实验,清除了数据中的高频噪声。实验中的两种光谱信号经消噪处理后,反映了数据的光谱特性,有利于进行光谱数据的拟合处理;尤其将受到气流强烈干扰的信号去除了大幅值的噪声信号,使该信号反映气流的速度特性,并能进行后续的线型拟合工作。     

A memetic algorithm for path planning of curvature-constrained UAVs performing surveillance of multiple ground targets

The problem of generating optimal paths for curvature-constrained unmanned aerial vehicles （UAVs） performing surveillance of multiple ground targets is addressed in this paper. UAVs are modeled as Dubins vehicles so that the constraints of UAVs＇ minimal turning radius can be taken into account. In view of the effective surveillance range of the sensors equipped on UAVs, the problem is formulated as a Dubins traveling salesman problem with neighborhood （DTSPN）. Considering its prohibitively high computational complexity, the Dubins paths in the sense of terminal heading relaxation are introduced to simplify the calculation of the Dubins distance, and a boundary-based encoding scheme is proposed to determine the visiting point of every target neighborhood. Then, an evolutionary algorithm is used to derive the optimal Dubins tour. To further enhance the quality of the solutions, a local search strategy based on approximate gradient is employed to improve the visiting points of target neighborhoods. Finally, by a minor modification to the individual encoding, the algorithm is easily extended to deal with other two more sophisticated DTSPN variants （multi-UAV scenario and multiple groups of targets scenario）. The performance of the algorithm is demonstrated through comparative experiments with other two state-of-the-art DTSPN algorithms identified in literature. Numerical simulations exhibit that the algorithm proposed in this paper can find high-quality solutions to the DTSPN with lower computational cost and produce significantly improved performance over the other algorithms.     

Cleaning space debris with a space-based laser system

High-energy pulsed laser radiation may be the most feasible means to mitigate the threat of collision of a space station or other valuable space assets with orbital debris in the size range of 1–10 cm. Under laser irradiation, part of the debris material is ablated and provides an impulse to the debris particle. Proper direction of the impulse vector either deflects the object trajectory or forces the debris on a trajectory through the upper atmosphere, where it burns up. Most research concentrates on ground-based laser systems but pays little attention to space-based laser systems.There are drawbacks of a ground-based laser system in cleaning space debris. Therefore the placement of a laser system in space is proposed and investigated. Under assumed conditions,the elimination process of space debris is analyzed. Several factors such as laser repetition frequency, relative movement between the laser and debris, and inclination of debris particles which may exercise influence to the elimination effects are discussed. A project of a space-based laser system is proposed according to the numerical results of a computer study. The proposed laser system can eliminate debris of 1–10 cm and succeed in protecting a space station.     

基于背景网格簇的动网格生成方法

提出了基于背景网格簇实现网格变形的新方法。背景网格簇由任一内边界节点和远场边界角点生成的背景网格构成,并随边界运动而变化。通过保持计算网格节点在每一个背景网格中所在单元的面积坐标不变(三维时保持体积坐标不变)而求出一组期望位置,加权平均该组期望位置,确定出该计算网格节点的新位置。其中权值与内边界节点和计算网格节点距离的倒数相关。新方法引入的背景网格簇可以有效地改进单个背景网格的不足之处。算例结果表明:基于背景网格簇的动网格生成方法实现简单,与弹簧近似法相比,新方法因不需要迭代求解方程组而非常高效,且拥有更强的网格变形能力;与Delaunay图映射法相比,该方法背景网格的单元个数极少,因此易于定位,且不会出现背景网格单元交叉的现象,网格变形能力更强,变形后的网格质量更好。