Estimation of ground range on the sweep frequency backscatter leading edge

The high frequency management system with backscatter radar supplies the real time ionosphere channel conditions to high frequency users, which leads to the demand for the ground range between the radar location and the scatters on the distant ground. The ionosphere electron density profile is usually inversed to obtain the ground range. An inversion algorithm, with which the ground range on the leading edge of the backscatter ionograms can be obtained without electron density, is presented in this paper. The ray path geometry of the backscatter sounding and the change in the group path on the leading edge with operating frequency are used to derive the ground range. Synthesized backscatter ionogram and experimental backscatter ionograms are processed to validate the algorithm. The results indicate that the algorithm is usable for high frequency management system.     

Structure and kinetic properties of slow-mode shocks associated with magnetic reconnection in the near-Earth magnetotail

We study the structure and kinetic properties of slow-mode shocks near the plasma sheet boundary layer (PSBL) associated with magnetic reconnection by Cluster observation. The presence of slow-mode shocks is confirmed by traditional Rankine–Hugoniot (RH) analysis and Monte-Carlo shock fitting method. The Walén analysis, applied to the tailward flow associated with slow-mode shocks, also supports that plasma was accelerated across a Petschek-type slow-mode shock connected to the diffusion region. Back-streaming ions were observed on the shock layer, and cold ions were accelerated and heated by slow-mode shocks. In addition, whistler and electrostatic solitary waves were observed around the slow-mode shocks. These waves might be excited by the observed field-aligned electron beams near the shocks.     

空间运输飞行器材料与制造技术需求分析

空间运输飞行器已经成为国际航天技术新的发展趋势,对材料和制造技术从两方面提出了新的需求:异形贮箱制造技术和热控材料与制造技术。本文对这两个问题进行了分析,结果表明:异形贮箱和热控硬件的材料与制造是制约空间运输飞行器发展的基础技术,必须在空间运输飞行器研制热潮之前先期突破。     

Effects of TADs on the F region of the mid-latitude ionosphere during an intense geomagnetic storm

Based on observations of two ionosondes at Wuhan and Kokubunji, this paper presents effects of TADs on the daytime mid-latitude ionosphere during the intense geomagnetic storm on March 31, 2001. During a positive ionospheric storm, the start of the enhancement of the foF2 (F2 peak plasma frequency) at Wuhan lags that at Kokubunji by 15 min, which corresponds to the time interval of traveling atmospheric disturbances (TADs’) propagation from Kokubunji to Wuhan. Associated with the uplifting of the hmF2 (height of F2 peak) caused by TADs, it is observed by the two ionosondes that the F1 cusp becomes better developed. Therefore, during a geomagnetic storm, TADs originating from the auroral oval may have a strong influence on the shape of the electron density profile in the F1 region ionosphere at middle latitudes. It is highly likely that TADs are responsible for the evolution of the F1 cusp.     

A discrete event systems approach to discriminating intermittent from permanent faults

Almost all work on model-based diagnosis （MBD） potentially presumes faults are per- sistent and does not take intermittent faults （IFs） into account. Therefore, it is common for diag- nosis systems to misjudge IFs as permanent faults （PFs）, which are the major cause of the problems of false alarms, cannot duplication and no fault found in aircraft avionics. To address this problem, a new fault model which includes PFs and IFs is presented based on discrete event systems （DESs）. Thereafter, an approach is given to discriminate between PFs and IFs by diagnosing the current fault. In this paper, the regulations of （PFs and IFs） fault evolution through fault and reset events along the traces of system are studied, and then label propagation function is modified to account for PFs and the dynamic behavior of IFs and diagnosability of PFs and IFs are defined. Finally, illustrative examples are presented to demonstrate the proposed approach, and the analysis results show the fault types can be discriminated within bounded delay if the system is diagnosable.     

定常对称背涡流态下细长体绕流结构的演变

应用数值计算的方法模拟了细长体截面绕流结构的演变过程.指出随着细长体背涡的发展,导致截面流场的拓扑结构发生变化,会出现一种临界流动状态.并用微分方程的定性理论分析了此时流场中出现的一种高阶奇点.这种高阶奇点的指数为-3/2,它是结构不稳定的,稍有扰动就会产生分叉,使流场的拓扑结构发生变化.得出了定常对称背涡流态下细长体的空间绕流结构图.     

"嫦娥二号"卫星CMOS相机技术及应用

"嫦娥二号"卫星上装载了1台降落相机和3台监视相机,相机采用CMOS成像技术,突破了轻小型低功耗高度集成化相机设计技术、自动曝光技术、高速彩色图像静态压缩技术以及开窗和亚采样技术,对月面、卫星太阳翼展开、490N发动机工作以及定向天线展开等卫星关键动作进行了成功拍摄,是中国CMOS成像技术在深空探测领域的首次成功应用,...     

通用计量器具在军工企业中的应用与管理

通过对通用计量器具在军工企业中基础性应用与管理的探讨,分析流通应用中存在的问题以及应用环节需求、计量器具维护管理、通用工作量规自控管理等事项,总结出通用计量器具的配置原则,达到提升军工企业人员的计量测试能力,提高军工企业产品合格率和生产工作效率的目的。     

BTA 深孔钻削切屑变形与刀齿切削力分布规律仿真

采用ABAQUS有限元分析软件,建立了错齿BTA钻头钻削环状工件单元切削仿真模型,以45#钢为工件材料,对错齿BTA钻头各刀齿切削不同直径的环状工件进行了模拟仿真,分析了钻削过程中错齿BTA钻头各个刀齿切屑的形成过程与变形特点,研究了环状单元切削力三分量随工件半径的受力分布规律.结果表明,错齿BTA钻头各刀齿切削力分量呈现出随半径增大而增大的非均匀分布规律,并且切削速度和进给量对切削力分布规律几乎没有影响.     

后掠翼对细长体中段大迎角绕流的影响

采用在细长体顶点处添加扰动块的方式使细长体的绕流具有确定性.研究了在大迎角下,后 掠翼对细长体绕流结构和气动力特性的影响.实验结果表明,在30°迎角时,细长体中段背 风侧的流动和压力分布受到后掠翼与头部背涡的双重控制.在迎角α=40°~60°范围内 , 后掠翼对细长体中段绕流起主控作用,使细长体中段背风侧流动呈现完全分离流状态,使得 中段背风侧的压力分布保持为均值.