Singularity analysis for single gimbal control moment gyroscope system using space expansion method

Control Moment Gyroscope (CMG) is an effective candidate for agile satellites and large spacecraft attitude control because of its powerful torque amplification capability. The most serious situation, however, in using CMG is the inherent geometric singularity problem, where there’s no torque output along a particular direction. Space expansion method has been proposed in this work for the singularity analysis. Based on inverse mapping transformation, an expanded Jacobian matrix which is a full rank square matrix is obtained. The singular angle sets of the 3-parallel cluster and pyramid cluster are distinguished using space expansion method. An effective hybrid steering strategy, able to deal with the elliptic singularity, is further proposed. Simulation results demonstrate the excellent performance of the proposed steering logic compared to the generalized singular robust logic and pseudo inverse logic in terms of energy consumption and torque error.     

Experimental investigation and correlation development of jet impingement heat transfer with two rows of aligned jet holes on an internal surface of a wing leading edge

Extensive experimental studies on the heat transfer characteristics of two rows of aligned jet holes impinging on a concave surface in a wing leading edge were conducted, where50000 Rej 90000, 1.74 H/d 27.5, 66° a 90°, and 13.2 r/d 42.03. The finding was that the heat transfer performance at the jet-impingement stagnation point with two rows of aligned jet holes was the same as that with a single row of jet holes or the middle row of three-row configurations when the circumferential angle of the two jet holes was larger than 30°. The attenuation coefficient distribution of the jet impingement heat transfer in the chordwise direction was so complicated that two zones were divided for a better analysis. It indicated that: the attenuation coefficient curve in the jet impingement zone exhibited an approximate upside-down bell shape with double peaks and a single valley; the attenuation coefficient curve in the non-jet impingement zone was like a half-bell shape, which was similar to that with three rows of aligned jet holes; the factors,including Rej, H/d and r/d, affected the attenuation coefficient value at the valley significantly.When r/d was increased from 30.75 to 42.03, the attenuation rates of attenuation coefficient increased only by 1.8%. Consequently, experimental data-based correlation equations of the Nusselt number for the heat transfer at the jet-impingement stagnation point and the distributionof the attenuation coefficient in the chordwise direction were acquired, which play an important role in designing the wing leading edge anti-icing system with two rows of aligned jet holes.     

运载火箭姿态系统自适应神经网络容错控制

针对运载火箭姿态系统跟踪问题,考虑干扰、执行器故障和模型不确定因素的影响,设计了一种基于自适应神经网络的非线性容错控制律。该控制算法结合了连续的终端滑模控制,径向基神经网络和自适应控制方法。首先,基于滑模控制理论,设计了一种快速终端滑模面,保证系统跟踪误差能够在有限时间收敛至零。然后,在终端滑模面基础上,提出了一种基于自适应径向基神经网络估计的终端滑模控制律。利用自适应参数的神经网络逼近系统参数并提高抗干扰性能,采用平滑连续控制策略消除了终端滑模中的颤动现象。通过李雅普诺夫的分析方法证明了闭环系统的收敛性和全局稳定性。采用数值仿真,验证了提出的基于自适应径向基神经网络的终端滑模控制律具有较好的跟踪性能和精度。     

基于CATIA V5系统的复杂机加件模线样板设计方法探索

模线样板是检验零件几何尺寸和外形轮廓的量具,在航空制造中有着极其重要的作用.对于复杂的机加件,其空间曲面的展开和结构轮廓的提取一直是机加件模线样板设计过程中的一个技术难题.针对飞机复杂机加零件模线样板设计中的两类典型问题提出三种有效、实用的解决方法,即"边界拟合曲面法"、"分割生长提取法"和"草图线面相合法".     

Reliable flight performance assessment of multirotor based on interacting multiple model particle filter and health degree

Multirotor has been applied to many military and civilian mission scenarios. From the perspective of reliability, it is difficult to ensure that multirotors do not generate hardware and software failures or performance anomalies during the flight process. These failures and anomalies may result in mission interruptions, crashes, and even threats to the lives and property of human beings. Thus, the study of flight reliability problems of multirotors is conductive to the development of the drone industry and has theoretical significance and engineering value. This paper proposes a reliable flight performance assessment method of multirotors based on an Interacting Multiple Model Particle Filter (IMMPF) algorithm and health degree as the performance indicator. First, the multirotor is modeled by the Stochastic Hybrid System (SHS) model, and the problem of reliable flight performance assessment is formulated. In order to solve the problem, the IMMPF algorithm is presented to estimate the real-time probability distribution of hybrid state of the established SHS-based multirotor model, since it can decrease estimation errors compared with the standard interacting multiple model algorithm based on extended Kalman filter. Then, the reliable flight performance is assessed with health degree based on the estimation result. Finally, a case study of a multirotor suffering from sensor anomalies is presented to validate the effectiveness of the proposed method.     

我国物流标准化存在的问题及对策

当前我国物流标准化存在以下问题:总体发展滞后、基础薄弱、体制"瓶颈"、采用国际标准少、对行政力量过于依赖,等等.解决的对策有:发挥政府部门作用、加快体系研究、借签国外经验、发挥行业协会作用、加大宣传力度,等等.     

热流限制下的最优气动力辅助变轨

以变轨能量消耗最小为优化目标，应用极大值原理研究了飞行过程受热流限制和升力系统约束下的气动力辅助共面变轨问题，飞行过程成分第一自由弧段，约束弧段，第二自由弧段三个部分，讨论了升力系数的最优表达式，分析了飞行过程中两种约束的相互作用，给出了约束弧起始位置的角点条件和终端的横截条件下，对不同的初值选取方法讨论了三种计算策略，并给出了数值算例。     

跨声速压气机转子的二次流旋涡结构

为了明确跨声速轴流压气机内部流场结构,数值模拟了NASA Rotor37转子,结合λ2准则分析流场参数,探索流动的规律和旋涡结构。研究发现,压气机转子的旋涡模型主要由马蹄涡、壁角涡、径向涡、脱落涡、泄漏涡、诱导涡和分离涡等7个旋涡组成。马蹄涡吸力面分支耗散,压力面分支向相邻的吸力面发展。壁角涡与脱落涡位于叶根角区,引起流动损失和角区失速。径向涡位于激波后吸力面的分离区内,它扩大吸力面分离、引起低能流体向叶顶堆积。激波与叶尖泄漏在叶顶通道中形成3涡:泄漏涡、诱导涡和分离涡,而叶栅通道出口存在分离涡和由泄漏涡与诱导涡合成的叶顶通道涡。泄漏涡与诱导涡破碎在流道中间产生的堵塞区,分离涡造成吸力面尾缘的低速区,共同触发跨声速压气机的失稳。     

不同宽高比的二元喷管电磁散射特性数值研究

为研究宽高比对二元喷管雷达散射截面(RCS)的影响,结合迭代物理光学法和等效边缘电磁流法开发了腔体电磁散射特性计算程序,用来分析二元喷管的雷达散射特性;并采用OpenMP和MPI两种并行技术提高计算效率。对比分析了不同宽高比(AR)的二元喷管在水平极化及垂直极化方式下的电磁散射特性,并给出了二元喷管在不同探测角下总散射场与边缘绕射场的RCS曲线。研究结果表明,在两种极化方式下,宽高比对边缘绕射场的RCS值影响不大而对总散射场影响较大;宽高比为2.0的模型在两种极化方式下,都具有较低的RCS值,相比宽高比为1.5的模型在水平极化方式和垂直极化方式下分别减少4.98%和6.72%。