基于多重集典型相关分析的图像融合方法

提出了多重集典型相关分析在图像融合中应用.多重集典型相关分析能够最大化多组图像之间的互信息量,从而提升融合后图像的信息量.在对图像进行小波分解后,多重集典型相关分析应用于低频系数的融合.实验表明,该方法能够同时获取多组图像融合所需的权重参数,并使得融合后图像信息量得到提升.     

独立电源系统有源滤波器测控系统自动定制技术

采用自动定制技术设计了独立电源系统有源滤波器测控系统。对独立电源系统有源滤波器测控系统进行了需求及特点分析。以需求为出发点并参考特点建立测控系统的体系结构,进行功能性的划分,实现了测控系统的功能构件化。采用面向对象的设计思想,将组成系统的构件抽象化为类,利用UML建模语言对测控系统进行建模,利用代码生成工具以及成熟的硬件构件实现测控系统。将自动定制得到的测控系统实际应用于独立电源系统有源滤波器中,对该系统进行了检验。     

基于CLIPS的飞机液压系统故障诊断专家系统构建研究

阐明了建立飞机液压系统故障诊断专家系统的必要性,并介绍了基于C语言的专家系统开发平台--CLIPS,以及应用CLIPS开发飞机液压系统故障诊断专家系统的基本过程.该专家系统能够根据飞机液压系统的故障现象进行自动诊断,为飞机液压系统的故障诊断、分析和排除提供了有实用价值的支持技术.     

Real-time and reliability analysis of time-triggered CAN-bus

Real-time performance and reliability are two most important issues in applications of time-triggered controller area network (CAN) bus systems at present. A scheduling matrix of time-triggered CAN-bus system is established using average-loading algorithm. Periodic messages are guaranteed to transmit without delay by distributing independent transmission windows within the system matrix. Considering the traditional CAN-bus transmission mechanism and the time-triggered feature, an algorithm is improved to calculate the worst-case delay of event-triggered messages in time-triggered CAN-bus systems. The failure probability is calculated for event-triggered messages whose worst-case delay exceeds their deadlines. Different levels of redundant structures of CAN-bus circuits are analyzed and the maintenance management is proposed to improve the system reliability. Finally, the reliabilities of different structures are calculated and the influences of maintenance on the system reliability are analyzed.     

激波风洞流场密度测量的聚焦纹影技术

在激波风洞试验中发展了聚焦纹影显示技术,对流场的密度进行了定量测量。聚焦纹影显示具有对流场区域聚焦显示的特点,可获得流场某个聚焦测试区域的密度变化信息。依据聚焦纹影成像原理建立了密度计算数学模型,对试验中获得的带窗口模型流场聚焦纹影图像与试验前获得的流场图像灰度变化处理后,得到了流场聚焦区域的密度定量值。试验测量密度值与数值计算结果进行了比较,结果表明试验获得的密度值变化规律与数值模拟吻合较好,证实了利用聚焦纹影技术开展流场密度测量是可行的。     

应着力推进空管技术保障人员的职业化建设

随着民用航空业的高速发展和航空业务的日益增长，航空科技不断进步，先进的空管技术设备的不断更新与应用，对民航空管技术保障从业人员的综合素质的要求越来越高，不但要求具备较高4的专业知识、专业技术和专业能力，而且还必须有正确的职业道德观和价值观。因为，空管技术部门具有高科技、高风险的特征，要确保航空安全和空管技术保障部门的正常运转，就必须依靠一支具有良好职业素质的技术保障队伍。所以，重视和搞好空管技术保障人员的职业化建设就显得至关重要。     

周扬学案

本篇旨在追溯透视案主周扬的学术渊源，学术建树，学术旨要，主要作等。以提供相应学术信息、资料和工具，使之更具研究价值和思想史料价值。     

航空公司航空油料成本管理研究

运用成本动因(costdriver)理论,对航空油料成本生成的关键因素进行深入探讨,在理解和把握航空油料成本的内涵和运动规律的基础上,提出一种全新的航空油料成本核算和管理方法,即:以存货管理方法进行航空油料成本核算和管理;以多层面、多动因要素核算、分配和控制航空油料成本。     

力传感器动标输入信号的理论研究

讨论了对力传感器进行动态校准时输入力信号应满足的条件，给出了三种常用的力传感器在动态标定时使用的力信号的频率特性和有效条件。     

Quantitative SNR analysis for ISAR imaging using jointtime-frequency analysis-Short time Fourier transform

V.C. Chen recently presented an inverse synthetic aperture radar (ISAR) imaging technique using the joint time-frequency analysis (JTFA), which has been shown having a better performance for maneuvering targets over the conventional Fourier transform method. The main reason is because the frequencies of the radar returns of the maneuvering targets are time varying and a JTFA is a technique that is suitable for such signals, in particular a JTFA may concentrate a wideband signal, such as a chirp, while it spreads noise. We quantitatively study the signal-to-noise ratio (SNR) in the ISAR imaging using one of the typical JTFA techniques, namely the short time Fourier transform (STFT). We show that the SNR increases in the joint time-frequency (TF) domain over the one in the time or the frequency domain alone both theoretically and numerically. This quantitatively shows the advantage of the JTFA technique for the ISAR imaging