纳米硅薄膜的氧化特性

将ｎｃ－Ｓｉ：Ｈ薄膜进行等离子和高温氧化处理，测量了样品的氢，氧含量，Ｒａｍａｎ谱，红外吸收谱，光致发光（ＰＬ），结果表明两种氧化方式都将氧掺入薄膜中，但不同处理方式氧在薄膜中的键合形式不同Ｒａｍａｎ谱表明氧化处理对薄膜中晶粒大小及晶态比没有影响，用晶粒－表面模型对氧化引起的光致发光（ＰＬ）蓝移进行了解释。     

滑动运行继电式激光制导系统

 继电控制式激光制导系统的简单性使它具有高可靠性、低成本等优点。而系统自振使得弹着点散布大,降低了制导精度。将滑动运动模态引人系统,使其变成滑动运行的继电控制方式。结果,弹着点散布压缩,制导精度提高,而且保持了原系统的优点。介绍了该系统的组成,分析了提高制导精度的原理,并提供一些仿真结果。     

基于重力模型阶次自适应的实时重力补偿系统研究

为了解决探测器在月面工作时惯性导航系统的误差累积问题,克服现有研究对环境敏感或是需要定期停止才能进行误差修复的短板,结合探测器的行驶行为,将探测器使用零速更新（ZUPT）原理修正误差的过程分解成了无ZUPT、完全ZUPT、水平动态ZUPT和垂向动态ZUPT 4种子模型的叠加,并分别推导了它们的系统矩阵和测量矩阵。针对月面导航系统提出了一种新型多模型零速更新（MMZUPT）算法。该算法应用多模型交互原理,允许多种更新模型同时工作,可以通过计算每个模型的权重在每个定位历元输出最优导航结果并约束误差。在精心挑选的受限环境中对月面导航进行了模拟实验,结果表明,所提MMZUPT方法无需频繁地主动停车以满足传统ZUPT使用边界就可以取得良好的效果,并且通过对包含错误的校准信号加以识别和利用可以获得更好的性能。     

Measurements of heat transfer and pressure in a trailing edge cavity of a turbine blade

 An experimental investigation is conducted to obtain the heat transfer and pressure drop data for an integral trailing edge cavity test section that simulates a novel turbine blade's internal cooling passage with bleed holes. Local heat transfer is measured on both the suction and pressure sides by a transient liquid crystal technique, while pressures at six positions are recorded by pressure calibrators. Moreover, flow characteristic and its effect on heat transfer are analyzed for conditions with or without bleed flow. The experimental results show that, in the cases with bleed flow, local heat transfer on the pressure side exceeds that on the suction side in the first and second channels. In the cases without bleed flow, in the first and third channels, local heat transfer on the suction side weakens whilst it increases significantly on the pressure side. For the second channel, non-bleed condition leads to a more balanced heat transfer distribution between the upstream and downstream channel. Besides, after the bleed holes are blocked, heat transfer in the first bend region on the suction side declines sharply, while the opposite phenomenon occurs for the second bend region on the pressure side. In both bleed and non-bleed cases, the total pressure of six measurement positions decreases continuously along the channel at the same Reynolds number and it promotes for higher Reynolds number. Among all the measurement points, under the same flow rate condition, the highest speed occurs at Position 5, which also shows the maximum difference between the total and static pressures. When the bleed holes are blocked, the total pressure at each measurement position appears to increase.     

基于USB接口的智能密码钥匙的研究

文中设计一种基于 USB接口的智能钥匙的实现方案 ,介绍其总体结构、硬件、软件性能指标及其应用     

星上控制力矩陀螺群隔振平台的动力学特性

为能够给星上有效载荷提供一种超静环境,提出一种星上控制力矩陀螺群(CMGs,Control Moment Gyroscopes)的隔振方案,并对所使用的隔振平台的动力学特性进行研究分析.首先介绍了不同参数模型的隔振元件工作原理和参数特性;其次利用牛顿-欧拉法对含有隔振平台和CMGs的卫星进行动力学建模;最后通过频域和时域的方法分析并对比了各个参数模型下的隔振平台力衰减特性以及对星体姿态稳定度的改善程度.结果表明:两参数加调谐质量阻尼器模型下的隔振平台对共振峰值有一定的衰减作用,三参数模型下的隔振平台在力衰减和对姿态稳定度的改善程度上要明显优于其他2种模型.     

锥导乘波机的构型设计与性能研究

以圆锥绕流流场为基础,运用锥导理论生成了不同的乘波机构型,并对乘波机进行了包括升力、粘性阻力、波阻、升阻比、乘波机长度、体积、容积效率等各主要性能指标在内的性能计算,初步确定出了锥导乘波机性能的变化规律及其决定性定型参数。计算结果表明:锥导乘波机构成方法简单且具有较高的升阻比和反设计性能,源流场圆锥半锥角、乘波机上表面型线曲率半径是影响锥导乘波机性能的决定性定型参数。     

对台阶问题与一类不定方程问题的探讨

文献[1]研究台阶问题时提出了它的两个等价命题,笔者论证了其中的不定方程问题与台阶问题是不等价的,对一般台阶问题和这一类不定方程作了深入讨论,并彻底解决了这两类问题。     

Global Hybrid Simulation of Magnetic Reconnection in the Magnetosheath

A three-dimensional (3-D) global hybrid simulation is carried out for the generation and structure of magnetic reconnection in the magnetosheath due to interaction of an interplanetary Tangential Discontinuity (TD) with the bow shock and magnetosphere. Runs are performed for solar wind TDs possessing different initial half-widths. As the TD propagates through the bow shock toward the magnetopause, it is greatly narrowed by a two-step compression processes, a "shock compression' followed by a subsequent ``convective compression'. In cases with a relatively thin solar wind TD, 3-D patchy reconnection is initiated in the transmitted TD, forming magnetosheath flux ropes. Multiple components of ion particles are present in the velocity distribution in the magnetosheath merging, accompanied by ion heating. For cases with a relatively wide initial TD, a dominant single X-line appears in the subsolar magnetosheath after the transmitted TD is narrowed. A shock analysis is performed for the detailed structure of magnetic reconnection in the magnetosheath. Rotational Discontinuity (RD)/Time-Dependent Intermediate Shock (TDIS) are found to dominate the reconnection layer, which and some weak slow shocks are responsible for the ion heating and acceleration.     

编制摸拟器设计和性能数据要求的初步考虑

在研制飞行模拟器时，飞行模拟器的设计和性能数据是必需的。这些数据不仅是形成满足飞行模拟器各种规范和标准要求的基础，而且也是构成模拟器逼真度要求的基础。根据国际航空运输协会的要求，初步讨论了编制飞行模拟器设计和性能数据要求所考虑的因素。