功率级无刷直流电动机四象限运行模拟器设计

针对无刷直流电动机（BLDCM）驱动控制器在研发过程中全工况测试困难、测试成本高和研发周期长的问题，提出了一种采用分区间采样和解算方法的、具有四象限运行能力的功率级（PHIL）无刷直流电动机模拟器，替代实物电动机和机械负载装置完成对两两导通控制方式下无刷直流电动机驱动控制器的各项性能测试与可靠性试验。该模拟器由实时仿真器、电动机模拟变换器和多级式双向变换器3部分组成，实时仿真器负责采集被测电动机驱动控制器输出的PWM电压，实时解算电动机模型得到三相电流指令，控制电动机模拟变换器生成三相电流，多级式双向变换器负责维持模拟器输入、输出间的能量平衡关系，从而实现对四象限运行时无刷直流电动机的功率级模拟。实验结果表明:所提出的功率级无刷直流电动机模拟器模拟精度高、实时性好、测试灵活，能够有效替代实物电动机和机械负载装置，满足电动机驱动控制器的测试需求。      

Inverse identification of constitutive parameters of Ti2AlNb intermetallic alloys based on cooperative particle swarm optimization

Ti₂AlNb intermetallic alloy is a relatively newly developed high-temperature-resistant structural material, which is expected to replace nickel-based super alloys for thermally and mechanically stressed components in aeronautic and automotive engines due to its excellent mechanical properties and high strength retention at elevated temperature. The aim of this work is to present a fast and reliable methodology of inverse identification of constitutive model parameters directly from cutting experiments. FE-machining simulations implemented with a modified Johnson-Cook (TANH) constitutive model are performed to establish the robust link between observables and constitutive parameters. A series of orthogonal cutting experiments with varied cutting parameters is carried out to allow an exact comparison to the 2D FE-simulations. A cooperative particle swarm optimization algorithm is developed and implemented into the Matlab programs to identify the enormous constitutive parameters. Results show that the simulation observables (i.e., cutting forces, chip morphologies, cutting temperature) implemented with the identified optimal material constants have high consistency with those obtained from experiments, which illustrates that the FE-machining models using the identified parameters obtained from the proposed methodology could be predicted in a close agreement to the experiments. Considering the wide range of the applied unknown parameters number, the proposed inverse methodology of identifying constitutive equations shows excellent prospect, and it can be used for other newly developed metal materials.     

高能(450 kV)X射线参考辐射场附加过滤研究

利用MCNP程序对450kV X光机建立模型，计算各参考辐射质下的原级谱、平均光子能量。对ISO 4037-1中已有范围的管电压与附加过滤片厚度关系曲线进行二次拟合，确定模拟厚度范围。利用MCNP计算各附加过滤组合下的平均光子能量值，并与外推法得出的平均光子能量值进行对比，将相对偏差最小时的附加过滤作为最终确定值。从部分能量点的模拟与测量结果的对比可看出，模拟得出的平均光子能量在2%以内与PTB及中国计量院测量结果保持一致，附加过滤最大相对偏差为18%。     

基于DDPG算法的无人机集群追击任务

无人机的集群化应用技术是近年来的研究热点，随着无人机自主智能的不断提高，无人机集群技术必将成为未来无人机发展的主要趋势之一。针对无人机集群协同执行对敌方来袭目标的追击任务，构建了典型的任务场景，基于深度确定性策略梯度网络（DDPG）算法，设计了一种引导型回报函数有效解决了深度强化学习在长周期任务下的稀疏回报问题，通过引入基于滑动平均值的软更新策略减少了DDPG算法中Eval网络和Target网络在训练过程中的参数震荡，提高了算法的训练效率。仿真结果表明，训练完成后的无人机集群能够较好地执行对敌方来袭目标的追击任务，任务成功率达到95%。可以说无人机集群技术作为一种全新概念的作战模式在军事领域具有潜在的应用价值，人工智能算法在无人机集群的自主决策智能化发展方向上具有一定的应用前景。     

虚拟多触角探测的高超声速滑翔飞行器再入机动制导

针对高超声速滑翔飞行器再入过程中面对的多约束问题，提出一种基于虚拟多触角探测的路航点规划机动制导策略。该机动制导策略通过飞行器最大转弯轨迹计算速度-剩余地面距离-航向角约束，在分段定点模式中发出多条粗略预测触角，引用触角末端反馈的信息计算优先级以确定临时路航点；同时在机动制导模式中发出精细探测触角，计算触角末端信息优先级，经倾侧角延时滤波器得出控制指令，对飞行器进行机动制导。基于多触角探测的路航点规划机动制导策略，降低了三触角机动制导方法中的计算时间；同时，4种典型禁飞区条件下的仿真结果表明，该策略能够有效稳定地解决机动制导过程中的多约束问题。     

遍历理论在航天动力学领域的应用

系统地研究遍历理论在航天动力学领域的应用，包括椭圆轨道长期覆盖和受晒因子等长期参数的平均化计算.从无摄和J2项摄动下平均轨道根数的长期和长周期项出发，构造非共振条件下覆盖和受晒因子的测度描述，并证明该测度的不变性；给出相关相空间和相流定义，并证明该相流的保测度性；应用Birkhoff Khinchin定理将长期覆盖和受晒因子等无限时间的累积问题成功转换为有限空间的二重积分运算.研究结果表明，遍历理论是解决航天动力学领域长期参数统计计算的有力工具.     

Sliding mode control design for oblique wing aircraft in wing skewing process

When the wing of Oblique Wing Aircraft (OWA) is skewed, the center of gravity, inertia and aerodynamic characteristics of the aircraft all significantly change, causing an undesirable flight dynamic response, affecting the flying qualities, and even endangering the flight safety. In this study, the dynamic response of an OWA in the wing skewing process is simulated, showing that the three-axis movements of the OWA are highly coupled and present nonlinear characteristics during the wing skewing. As the roll control efficiency of the aileron decreases due to the shortened control arm in an oblique configuration, the all-moving horizontal tail is used for additional roll and the control allocation is performed based on minimum control energy. Given the properties of pitch-roll-yaw coupling and control input and state coupling, and the difficulty of establishing an accurate aerodynamic model in the wing skewing process due to unsteady aerodynamic force, a multi-loop sliding mode controller is formulated by the time-scale separation method. The closed-loop simulation results show that the asymmetric aerodynamics can be balanced and that the velocity and altitude of the aircraft maintain stable, which means that a smooth transition is obtained during the OWA’s wing skewing.     

基于多尺度 3D-2D卷积神经网络的高光谱图像分类

设计提出了 1种针对高光谱图像分类任务的 3D-MSCNN模型。在 PCA降维的基础上,利用 3D空谱特征提 取网络和 2D多尺度特征提取网络实现高光谱图像特征提取,充分发挥高光谱图像空谱信息价值,增强对不同尺度 地表覆盖的表达能力。最后,利用 Softmax分类损失函数实现高光谱图像分类任务。实验结果表明,本文算法在 In. dian Pines和 Pavia University数据集上都取得了较好的分类效果。与 CD-CNN、3D-CNN、SS-Net和 HybirdSN等方法相 比,本文算法能够有效提升总体精度、平均精度和 Kappa系数等客观评价指标。