钛合金表面镍包石墨喷涂层的耐磨性能

为了提高钛合金的表面耐磨性,利用氧乙炔热喷涂枪,在TC4合金表面上制备出镍包石墨涂层。采用MXP-2000型销盘式摩擦磨损实验机,进行钛合金及其镍包石墨涂层的干摩擦磨损实验,并利用扫描电镜对磨损表面进行观察和分析。实验结果发现,镍包石墨涂层的摩擦系数只有钛合金的一半左右,前者磨损量为后者的1/6,说明镍包石墨涂层可以大大提高钛合金的表面耐磨性能。TC4合金的磨损机制以黏着磨损为主,喷涂层的磨损机制以磨粒磨损为主,喷涂层中的石墨润滑相是其耐磨性高的主要原因。     

空载固体发动机计算与试验模态相关性分析

为了预测空载状态固体火箭发动机动态特性,对其进行了模态试验,并应用MSC.Marc进行了模态计算,然后对比两者的结果,进行了相关性分析和评估。计算得到了发动机250Hz以内的一阶弯曲模态和五阶呼吸模态。试验测得了发动机的三阶呼吸模态和一阶弯曲模态。比较试验测试模态和与之对应的计算模态:固有频率相对误差均在5%以内;振型相关图上的点大都分布在斜率为1(或 1)的直线周围;MAC(模态置信判据)值在0 9左右。说明计算与试验模态有较好的相关性,有限元计算模型比较准确的反映了实际情况。     

An innovative study on low surface energy micronano coatings with multilevel structures for laminar flow design

Laminar flow design is one of the most effective ways to reduce the drag of a commercial aircraft by expanding the laminar flow region on the surface of the aircraft. As material science develops, the emergence of new materials such as low surface energy materials has offered new choices for laminar flow design of commercial aircraft. Different types of low surface energy micro-nano coatings are prepared to verify the effects on the boundary layer transition position and the drag of the airfoil through wind tunnel tests. The infrared thermal imaging technology is adopted for measuring the boundary layer transition, while the momentum integral approach is employed to measure the drag coefficient through a wake rake. Infrared thermal imaging results indicate that the coatings are capable of moving backward the boundary layer transition position at both a low velocity of Mach number 0.15 and a high velocity of Mach number 0.785. Results of the momentum integral approach demonstrate that the drag coefficients are reduced obviously within the cruising angle of attack range from 1° and 5° by introducing the low surface energy micro-nano coating technology.     

A general calculation method to specify center-of-buoyancy for the stratospheric airship with multiple gas cells

As the lighter-than-air (LTA) flight vehicle, the stratospheric airship is a desirable platform to provide communication and surveillance services. During the ascent from sea-level to the mission altitude, the volume of the lifting gas may change significantly, which will result in the change of the center-of-buoyancy (CB). A general calculation method is developed to specify CB for the stratospheric airship with a double-ellipsoid hull and an arbitrary number of the gas cells. The cross-section-integral (CSI) method is used as a basic calculation scenario to specify CB. Considering the complexity in determining the boundary between the helium and air in the gas cell, a searching algorithm is put forward and the specification of CB can be conducted by the iterative calculation. As an important application, the stable condition of the pitch angle is analyzed when the change of CB is involved. Under different initial configurations, the stable pitch angle of the stratospheric airship during the ascent is specified and compared, which shows the advantages of the multi-gas-cell configuration. The results of this paper may provide an important reference for the engineering application of the stratospheric airship.     

自适应航天器态势分析系统

利用深度学习中的卷积神经网络理论,基于单目视觉系统和带有标识物的航天器影像,实现对航天器的三维姿态角、距拍摄点距离和相对拍摄中心偏移量的精准测量。利用机器学习理论实现网络自主学习样本特征,这一方式将大幅降低动态测量的误差。同时,这种测量方式也避免了人工提取特征的复杂过程,实现任意、精准、快速测量,对航天器在组装及发射过程中的姿态估计、距离测算起到关键性作用。     

国内外行星表面巡视器自主导航技术研究

作为航天技术发展的前沿和趋势,深空探测是人类历史上最为复杂的系统工程之一.星球巡视器是在星球表面移动作业的无人探测系统,能够对星球表面进行大面积、近距离和接触式的考察,是地外星球着陆探测作业的主要手段.星球巡视器导航技术是研究星球巡视器的关键技术之一,其导航自主性能直接影响星球探测计划能否顺利进行.本文首先概述了星球巡...     

Numerical analysis of hypersonic thermochemical non-equilibrium environment for an entry configuration in ionized flow

A theoretical methodology for thermochemical non-equilibrium flow combing with the HLLC (Harten-Lax-van Leer Contact) scheme was applied to study the hypersonic thermochemical non-equilibrium environment of an entry configuration in ionized flow. A two-temperature controlling model was utilized and the Gupta’s 11 species (N₂, O₂, NO, O, N, NO⁺, N₂⁺, O₂⁺, N⁺, O⁺, e^?) thermochemical non-equilibrium model was taken. Firstly, numerical calculations of hypersonic thermochemical non-equilibrium environments for different aerodynamic shapes were carried out to verify the reliability of the method above. Then, the method was used to research the effects of ionization and wall catalysis on the hypersonic thermochemical non-equilibrium environment of the entry configuration in ionized flow. The shock stand-off distance can be reduced by thermochemical reactions but doesn’t continue to decrease significantly when ionization occurs. The shock stand-off distance calculated by the 11 species model is 4.2% smaller than that calculated by the 5 species (N₂, O₂, NO, O, N) thermochemical non-equilibrium model without considering ionization. Ionization reduces wall heat flux but increases wall pressure a little. The effect of ionization on aerothermal loads is greater than that of aerodynamic loads. The thermochemical reactions of electrons and ions catalyzed at the wall increase wall heat flux significantly but make a small change in wall pressure. The maximum wall heat flux obtained by only considering the electrons and ions catalyzed at the partially catalytic wall condition is 11.8% less than that calculated at the super-catalytic wall condition.     

基于局部三角变换的OFDM系统

正交频分复用(OFDM)调制技术由于具有良好的抗多径干扰能力和高效的频谱利用率,在许多数字传输系统中被广泛应用,成为当今卫星通信研究的热点。本文提出了基于局部三角变换（LTT）的OFDM系统模型,该系统带外频率谱密度下降快,并能保持相邻的OFDM符号的正交性。给出了用离散余弦变换（DCT）实现的快速算法及复杂度,并考查了最优基的选取。仿真和分析结果表明：该系统误码率比基于快速傅里叶变换（FFT）的系统更小,能更好地适应高速传输带来的大多普勒频移,更有效地利用带宽,为接收端对高速数据的解调提供很好的保证。     

旋转对曲率表面气膜冷却效率影响的数值研究

通过对旋转状态下曲率通道的气膜冷却现象的流动和换热进行数值模拟,得到了不同旋转数下凸表面和凹表面的冷却效率分布。计算选用剪切应力输运(SST)湍流模型,主流雷诺数ReD=4 797,吹风比M=0.4,旋转数Rt=0~0.023 9。研究结果表明,旋转数对冷却效率的影响明显：旋转数的增大使得气膜的轨迹偏转越明显,并且凸表面上气膜轨迹的偏转程度高于凹表面的。凸表面的冷却效率随着旋转数的增加而逐渐减小,而凹表面的冷却效率随着旋转数的增加而递增,并且旋转数的增加会弱化凸表面和凹表面上冷却效率的差别。