利用粒子群支持向量机预测轴流压气机机匣壁面压力

建立了基于粒子群优化的轴流压气机机匣压力支持向量机预测模型.利用支持向量机的强大非线性映射能力,实现了对某型轴流压气机机匣压力时间序列的非线性预测,并运用粒子群优化算法对支持向量机的重要参数进行了优化,增强了预测模型对混沌动力学的联想和泛化推理能力,提高了预测的精度和稳定性.而针对发动机台架试验数据的预测结果证明了方法...     

基于QFD和TRIZ的可信软件技术冲突解决方法

为解决软件开发中的技术冲突及提高软件的可信性,提出了基于质量功能展开(QFD)和发明性问题解决理论(TRIZ)的可信软件技术冲突解决方法.首先构建可信软件规划质量屋,在软件开发过程中引入用户视角;其次,重点分析质量屋的技术特性自相关矩阵中呈负相关的技术特性,尝试用TRIZ的发明创新原理予以解决,获得多个可行的创新性解决...     

一种提高导航卫星星座自主定轨精度的方法研究

针对近地导航卫星仅利用星间测距进行自主定轨时,因无法消除星座整体旋转误差而导致长期自主定轨精度不高的问题,提出了利用拉格朗日导航卫星星座与近地导航卫星星座联合仅利用星间测距进行自主定轨的方法。建立了拉格朗日轨道导航卫星星座和近地导航卫星星座联合仅利用星间测距进行自主定轨的动力学模型和观测模型。利用扩展Kalman滤波（EKF）算法和星间测距信息实现了拉格朗日轨道导航星座与近地导航星座的长期自主定轨。以4颗拉格朗日卫星组成的导航星座与12颗GPS卫星组成的近地导航星座作为仿真对象进行了仿真分析,仿真结果表明本文仅利用星间测距的联合自主定轨方法可以有效提高导航卫星星座的长期自主定轨精度。
     

基于神经网络的无迹滤波改进算法

介绍了采用无迹变换(UT)描述随机变量通过非线性系统后的均值及方差的方法,提出可以将神经模糊推理系统(ANFIS)用于确定无迹变换中的参数,使其对随机变量均值的描述达到二次以上精度,并给出了改进的无迹滤波器(UKF)结构和神经网络训练方法;仿真结果表明,该算法适用于系统含有未知输入或系统噪声为非高斯的情况,并可解决一些典型的非线性估计问题,改进算法的性能优于传统无迹滤波器。     

小卫星编队绕飞构型运动学设计与分析研究

基于运动学的相对运动数学模型,利用物理意义更明确的绕飞方程进行了小卫星绕飞轨道的设计.根据绕飞轨道方程,重点分析了4类常用的绕飞编队构型:同绕飞轨道编队、同面同绕飞中心编队、异面同绕飞中心编队和多绕飞中心编队,总结分析了各种编队轨道设计的约束条件,获得了一般规律性结论.最后通过仿真验证了所提出的绕飞编队轨道设计方法和结论的正确性.     

XNAV算法及其整周模糊度确定方法研究

X射线脉冲星导航(XNAV)是一种新型的航天器天文导航方法.研究了利用脉冲星脉冲相位观测信息进行导航卫星自主定轨的算法.首先分析了X射线脉冲在卫星和太阳系质心之间的传播时间方程,然后利用卫星与太阳系质心之间的相位差分观测量建立了系统的观测方程;结合导航卫星的轨道动力学特性,采用扩展卡尔曼滤波算法估计卫星的轨道.考虑到卫星轨道动力学预报得到的卫星位置值具有较好的精度,提出直接利用该位置预报值快速确定整周模糊度,并验证了该方法的可行性.数学仿真表明,该导航算法能够精确确定导航卫星在 l惯性系F的绝对位置.     

Relay selection in cooperative communication systems over continuous time-varying fading channel

In this paper, we study relay selection under outdated channel state information (CSI) in a decode-and-forward (DF) cooperative system. Unlike previous researches on cooperative commu-nication under outdated CSI, we consider that the channel varies continuously over time, i.e., the channel not only changes between relay selection and data transmission but also changes during data transmission. Thus the level of accuracy of the CSI used in relay selection degrades with data transmission. We first evaluate the packet error rate (PER) of the cooperative system under contin-uous time-varying fading channel, and find that the PER performance deteriorates more seriously under continuous time-varying fading channel than when the channel is assumed to be constant during data transmission. Then, we propose a repeated relay selection (RRS) strategy to improve the PER performance, in which the forwarded data is divided into multiple segments and relay is reselected before the transmission of each segment based on the updated CSI. Finally, we propose a combined relay selection (CRS) strategy which takes advantage of three different relay selection strategies to further mitigate the impact of outdated CSI.     

ABORT-like detector to combat active deceptive jamming in a network of LFM radars

This paper studies an electronic counter-counter measures (ECCM) scheme combating against deceptive electronic counter measure (ECM) techniques.An adaptive detector exploiting generalized likelihood ratio test (GRLT) criterion is applied to detect the presence of deceptive jamming in fractional Fourier transform (FrFT) domain.First,the generating mechanism of spurious frequencies is analyzed based on the Volterra serial.The proposed nonlinear distortion model based on power amplifier behavior is robust in distortion analysis when the memory effect is considered.Second,a modified adaptive beamformer orthogonal rejection test (ABORT) like detector in closed form is built.The proposed detector can discriminate the echo and deceptive jamming adaptively by exploiting primary data and secondary data.This ECCM scheme is capable of guaranteeing the performance without the restriction of orthogonality,which is essential for the ABORT detectors.The expansion to radar network is discussed as a special case at the final part of this paper.Numerical simulations demonstrate the effectiveness of the proposed method.     

基于弹塑性理论的新型接触热导模型

提出了一种新型接触热导的模型。充分考虑界面上微凸体的变形,根据微凸体变形连续的特点,分别给出了弹性、弹塑性、塑性三种变形时的接触方程。用Weierstrass-Mandelbrot分形函数描述粗糙表面轮廓曲线,并考虑了接触点的基体热阻及其界面收缩热阻,构建了分形热阻网格模型,分析了接触热导与载荷的关系,与实验数据及模型、Mikic弹性模型和Yovanovich塑性模型的预测值进行了比较。结果表明:该模型能较好地预测界面接触热导,有其合理性。