促进循环经济发展的税收对策

循环经济是一种全新的经济模式,它关注的是资源减量、循环及再利用的问题.文章阐述分析了国外为实现循环型经济所采取的税收政策,指出了我国目前在该领域所存在的问题.并根据我国的实际情况,提出了促进发展循环经济发展的税收对策.     

高职《工程图学》学习能力的培养

根据工程图学课程的内容特点和在专业学科中的位置,结合大学新生的认知特点,探索并实践了在<工程图学>课程中培养学生学习能力的方法,包括动手实践能力和空间想象能力的培养.教学实践证明,通过这些能力的培养,有利于激发大学新生学习制图课程的兴趣,克服畏难心理,收到良好的教学效果.     

Silver Film Growth on Glass Ceramic by Radio Frequency Magnetron Sputtering

Thin silver films are deposited by radio frequency magnetron sputtering on glass ceramic at room temperature.Variations of sputtering power,bios voltage and power density are carried out for each deposition,then parts of as-deposited samples are subjected to annealing at 600 ℃ within a vacuum chamber.Structural properties are studied by X-ray diffraction(XRD),scanning electron microscope(SEM)and laser scanning confocal microscope(LSCM).It is shown that structural properties have a strong dependency on sputtering power and annealing temperature.Electrical contact resistance measured by a four point probe instrument is directly affected by the thickness of films.It is also found that the film conductivity,especially in thinner films,is improved by the increasing grain size.Finally,the film adhesion is observed by scratch tests.And the adhesive ability deposited by radio frequency magnetron sputtering shows a better performance than that produced by traditional methods.     

静电电磁脉冲辐射场诱发针-球电极结构放电试验

针对当前国内外诱发静电放电（ESD）研究较少的实际情况，为了解自然环境下静电放电辐射场诱发放电的基本特性，进一步分析诱发放电的特征规律，建立了大气条件下诱发放电试验系统。主要采取理论分析、试验验证的方式，对静电放电辐射场诱发针-球电极结构放电的基本规律进行摸索，初步得出了诱发放电的基本规律。研究结果表明：在外界条件一定的情况下，随着辐射场强的不断增大，放电重复频率不断增大；在辐射场强一定的情况下，随着高压源电压的不断增大，诱发放电重复频率不断增大；在外界环境条件一定的情况下，能够确定该条件下的诱发放电唯一阈值。这些试验规律的取得，为真空条件下的诱发放电特性研究提供了试验方法和理论依据，对开展航天器运行环境中的诱发放电研究和防护方法设计具有重要意义。     

基于增量学习的高光谱图像目标检测

高光谱图像目标检测是高光谱图像分析中的重要研究内容之一。本文从经典有效的约束能量最小化算法出发,提出了一种基于增量学习的高光谱目标检测方法。当获得新的样本时,不需要重新计算所有样本的自相关矩阵即可对检测器模型进行更新,减轻了星上有限计算资源的负担。实验结果表明:本文提出的目标检测算法在压制背景光谱的同时可以更好地适应目标光谱,提高了算法的检测性能。     

位错对形变304亚稳态不锈钢中奥氏体的电化学性能的影响

AISI 304亚稳态奥氏体不锈钢形变时容易发生相变,为避免产生相变马氏体而专注于研究位错的影响,采用局部电化学技术研究了拉伸应变分别为0%、10%、20%、30%和40%时的AISI 304不锈钢中奥氏体晶粒的电化学性能的变化规律,并分析了位错密度及位错组态对阻抗谱和动电位极化曲线等电化学性能的影响机理。研究结果表明:奥氏体的阻抗随位错密度的增大而降低,在低应变水平下位错密度的增大对阳极电流密度的降低有着重要作用;阳极电流密度随应变水平增加而增加,达到一个最大值后显著下降。通过扫描开尔文探针(SKP)的测量结果,计算得知位错堆积数比位错密度对阳极电流密度的影响更为显著,尤其是对于高应变水平不锈钢。     

Cortical Microtubule Reorientation and Its Relation to Cell Surface Texture of Epidermal Cells of Arabidopsis Thaliana Hypocotyls under Simulated Microgravity Conditions

Gravitropic curvature growth of Arabidopsis hypocotyls mainly occurred in the rapid growing Elongation Zone (EZI), not in the slow-growing Elongation Zone (EZⅡ). By examining reorientation of Microtubules (MT) and phenotype of the cell wall in the EZI and the EZⅡ of Arabidopsis hypocotyls under normal gravitational condition, it is found that MTs in the rapid growing epidermal cells were mainly in the transverse direction, while those in the non-growing epidermal cells were in the longitudinal directions. However, this difference in cortical MT arrays between the EZI and EZⅡ cells disappeared when the seedlings were exposed to the simulated microgravity condition on a horizontal clinostat. Field emission scanning electron microscopy revealed that the surface texture of epidermal cells, like the direction of the MT, in the EZI and the EZⅡ also became similar when exposed to the simulated microgravity condition. This result indicated that simulate microgravity could modify the potential differentiation between the EZI and the EZⅡ by affecting the orientation of cortical MT in the epidermal cells.      

A parameterized geometry design method for inward turning inlet compatible waverider

Intensive studies have been carried out on generations of waverider geometry and hypersonic inlet geometry. However, integration efforts of waverider and related air-intake system are restricted majorly around the X43A-like or conical flow field induced configuration, which adopts mainly the two-dimensional air-breathing technology and limits the judicious visions of developing new aerodynamic profiles for hypersonic designers. A novel design approach for integrating the inward turning inlet with the traditional parameterized waverider is proposed. The proposed method is an alternative means to produce a compatible configuration by linking the off-the-shelf results on both traditional waverider techniques and inward turning inlet techniques. A series of geometry generations and optimization solutions is proposed to enhance the lift-to-drag ratio. A quantitative but efficient aerodynamic performance evaluation approach （the hypersonic flow panel method） with lower computational cost is employed to play the role of objective function for opti- mization purpose. The produced geometry compatibility with a computational fluid dynamics （CFD） solver is also verified for detailed flow field investigation. Optimization results and other numerical validations are obtained for the feasibility demonstration of the proposed method.     

FDS模拟DA-1AT型射流风机速度场的适用性研究

射流风机是纵向排烟系统的主要装备.近年来,其在地下车库及大空间诱导排烟系统设计中得到应用并成为研究热点.依据DA-1AT型射流风机速度场实验测试数据,采用与火灾动力学速度场模拟结果比较的方法,验证了FDS在模拟射流风机速度场方面的适用性和可信性.分析研究了FDS网格独立性问题,给出了DA-1AT型射流风机模型建议尺寸和FDS网格尺寸,可以为射流风机流场分析提供参考.