Interpretation of data on laser sensing of aerosol atmosphere from space

A single-frequency lidar, using aerosol scattering as an informative component, is the simplest and reliable facility for remote sensing of the atmosphere. The information on vertical distribution of atmospheric aerosol which can be obtained using such a lidar is necessary for investigating the physics of atmospheric processes and forecast of optical state of the atmosphere. At the same time, the interpretation of data on single-frequency sounding is associated with some difficulties of fundamental character, mainly due to insufficient software of the experiment. Under such conditions the problems of optimal processing of lidar returns aiming at extracting the useful information on aerosol are of great importance, especially if one takes into account the hindering effects of atmospheric background and optical noises. This paper presents a statistical approach to this problem, and the possibilities of single-frequency sounding from space are analyzed.     

Multi-computer VXIbus system set up and use

VXI has matured into a flexible bus architecture with which to develop various types of instrumentation systems. This paper details the multi-computer approach used in the VXI-based system that CACI developed for the Air Force. The system, the Engine Test/Trim Automated System II (ETTAS II) is designed to test: all Air Force jet engines. The paper discusses how to integrate multiple computers in a VXI-based system, including discussions on: setting up the computers; selecting register-based versus message-based computers; setting up and using shared-memory; defining and separating tasks for each computer. The shared memory discussion talks about different ways to structure the shared memory, including setting up a system-level “Current-Value Table” (CVT) for all instruments, as well as how other devices, including another computer can access the shared memory space. The paper shows how Commercial-Off-the-Shelf (COTS) software products NI-VXI, LabVIEW, and NI-VISA (National Instruments) can be used to satisfy all these requirements. The paper shows how the multi-computer approach can be cost-effective in many cases     

Rio de la Plata estuarine system: Relationship between river flow and frontal variability

This paper deals with the application of SeaWIFS images to characterize spatial and temporal variability of fronts in the Rio de la Plata estuarine system over the period 2000–2003. We aim to depict the relationship between river outflow and variability of fronts’ loci on monthly to ENSO-related timescales and the influence of the winds along Rio de la Plata (axial winds) on the abrupt changes in frontal dynamics over synoptic timescales. During the studied period both La Niña (July 1999–June 2000) and El Niño (April 2002–May 2003) events induced significant displacements of fronts. Three distinct fronts were analyzed between river, estuarine, coastal and marine waters of the Rio de la Plata: Main Turbidity Front, Main Marine Front, and Secondary Marine Front. Their number, location and separation seem to be mainly related to river outflow and second, to fresh (>8 m/s) axial winds. During low discharge periods (i.e. summer time and/or La Niña events) these winds induce abrupt changes in the location of fronts (100–200 km) and greater separation between them over synoptic timescale, whereas during high river discharge or ENSO years some of the variability of fronts location is explained by the river’s outflow fluctuations, especially by the high variability of the River Uruguay discharge.     

Using sunshine for elementary space science education: A model for IHY scientist–teacher partnerships

An elementary science education professional development partnership between Culver City Unified School District teachers and UCLA has been formed. The project was designed to assist teachers to comfortably present introductory space science concepts, to support them in their efforts, and to aid them in encouraging their students to develop inquiry skills related to space sciences. The project encourages teacher use of observational science techniques in their classrooms, the use of NASA solar mission images and enhanced use of astronomical observation to facilitate discovery learning. The integrated approach of the project has fostered collegial learning activities among the participating teachers and offered them opportunities for continued renewal and professional development of teacher competencies in astronomy and space science. The activities used in the classroom were developed by others, classroom tested, and specifically address National Science Education and California Science Content Standards. These activities have been sustained through on-going collaboration between the scientist and the teachers, a summer Research Experience for Teachers program, and on-going, grade-specific, district-sponsored workshops. Assessment of the value of the program is done by the school district and is used to continuously improve each workshop and program component. Culver City (California) Unified School District is a small urban school district located on the Westside of Los Angeles. This paper describes the program and the plans for incorporating IHY-themed science into the classroom.     

Development of an improved ground-based prototype of space plant-growing facility

Based on a formerly developed ground-based prototype of space plant-growing facility, the development of its improved prototype has been finished, so as to make its operating principle better adapt to the space microgravity environment. According to the developing experience of its first generation prototype and detailed demonstration and design of technique plan, its blueprint design and machining of related components, whole facility installment, debugging and trial operations were all done gradually. Its growing chamber contains a volume of about 0.5 m³ and a growing area of approximate 0.5 m²; the atmospheric environmental parameters in the growing chamber and water content in the growing media were controlled totally and effectively; lighting source is a combination of both red and blue light emitting diodes (LED). The following demonstrating results showed that the entire system design of the prototype is reasonable and its operating principle can nearly meet the requirements of space microgravity environment. Therefore, our plant-growing technique in space was advanced further, which laid an important foundation for next development of the space plant-growing facility and plant-cultivating experimental research in space microgravity condition.     

Estimation techniques for GMSK using linear detectors in satellite communications

This paper describes data-aided signal level and noise variance estimators for Gaussian minimum shift keying (GMSK) when the observations are limited to the output of a filter matched to the first pulse-amplitude modulation (PAM) pulse in the equivalent PAM representation. The estimators are based on the maximum likelihood (ML) principle and assume burst-mode transmission with known timing and a block of L₀ known bits. While it is well known that ML estimators are asymptotically unbiased and efficient, the analysis quantifies the rate at which the estimators approach these asymptotic properties. It is shown that the carrier phase, amplitude, and noise variance estimators are unbiased and can achieve their corresponding Cramer-Rao bounds with modest combinations of signal-to-noise ratio and observation length. The estimates are used to estimate the signal-to-noise ratio. It is shown that the mean squared error performance of the ratio increases with signal-to-noise ratio while the mean squared error performance of the ratio in decibels decreases with signal-to-noise ratio. Simulation results are provided to confirm the accuracy of the analytic results.     

Soft X-ray characteristics of white dwarfs observed by EXOSAT

EXOSAT has observed 19 hot white dwarfs with alleged strong soft X-ray emission. Positive detection of a large fraction of this sample was obtained, among these practically all hot DA dwarfs. High-resolution spectral data, acquired with the 500 1/mm grating spectrometer, indicates no traces of He in the atmosphere of HZ43, i.e. n(He)/n(H) ? 10^?5 at a photospheric temperature of 60000 K (log g = 8). In contrast, the hot DA1 dwarf Feige 24 shows the presence of an appreciable He-abundance (n(He)/n(H) ? 10^?3); however no simple homogeneously mixed H/He atmosphere can explain the observed spectral shape.     

Dynamics of a spacecraft and normalization around Lagrangian points in the Neptune–Triton system

The problem of a spacecraft orbiting the Neptune–Triton system is presented. The new ingredients in this restricted three body problem are the Neptune oblateness and the high inclined and retrograde motion of Triton. First we present some interesting simulations showing the role played by the oblateness on a Neptune’s satellite, disturbed by Triton. We also give an extensive numerical exploration in the case when the spacecraft orbits Triton, considering Sun, Neptune and its planetary oblateness as disturbers. In the plane a × I (a = semi-major axis, I = inclination), we give a plot of the stable regions where the massless body can survive for thousand of years. Retrograde and direct orbits were considered and as usual, the region of stability is much more significant for the case of direct orbit of the spacecraft (Triton’s orbit is retrograde). Next we explore the dynamics in a vicinity of the Lagrangian points. The Birkhoff normalization is constructed around L₂, followed by its reduction to the center manifold. In this reduced dynamics, a convenient Poincaré section shows the interplay of the Lyapunov and halo periodic orbits, Lissajous and quasi-halo tori as well as the stable and unstable manifolds of the planar Lyapunov orbit. To show the effect of the oblateness, the planar Lyapunov family emanating from the Lagrangian points and three-dimensional halo orbits are obtained by the numerical continuation method.     

Integration of lessons from recent research for “Earth to Mars” life support systems

Development of reliable and robust strategies for long-term life support for planetary exploration must be built from real-time experimentation to verify and improve system components. Also critical is incorporating a range of viable options to handle potential short-term life system imbalances. This paper revisits some of the conceptual framework for a Mars base prototype which has been developed by the authors along with others previously advanced (“Mars on Earth^®”) in the light of three years of experimentation in the Laboratory Biosphere, further investigation of system alternatives and the advent of other innovative engineering and agri-ecosystem approaches. Several experiments with candidate space agriculture crops have demonstrated the higher productivity possible with elevated light levels and improved environmental controls. For example, crops of sweet potatoes exceeded original Mars base prototype projections by an average of 46% (53% for best crop) ultradwarf (Apogee) wheat by 9% (23% for best crop), pinto bean by 13% (31% for best crop). These production levels, although they may be increased with further optimization of lighting regimes, environmental parameters, crop density etc. offer evidence that a soil-based system can be as productive as the hydroponic systems which have dominated space life support scenarios and research. But soil also offers distinct advantages: the capability to be created on the Moon or Mars using in situ space resources, reduces long-term reliance on consumables and imported resources, and more readily recycling and incorporating crew and crop waste products. In addition, a living soil contains a complex microbial ecosystem which helps prevent the buildup of trace gases or compounds, and thus assist with air and water purification. The atmospheric dynamics of these crops were studied in the Laboratory Biosphere adding to the database necessary for managing the mixed stands of crops essential for supplying a nutritionally adequate diet in space. This paper explores some of the challenges of small bioregenerative life support: air-sealing and facility architecture/design, balance of short-term variations of carbon dioxide and oxygen through staggered plantings, options for additional atmospheric buffers and sinks, lighting/energy efficiency engineering, crop and waste product recycling approaches, and human factor considerations in the design and operation of a Mars base. An “Earth to Mars” project, forging the ability to live sustainably in space (as on Earth) requires continued research and testing of these components and integrated subsystems; and developing a step-by-step learning process.     

Investigation of resonant modes and frequencies of plate vibrations as applied to turbomachine blades

The results of experimental and numerical investigations of resonant vibration frequencies and modes for rectangular cantilever plates of constant thickness are presented. The investigations are carried out using the methods of interference holography and finite elements, and the results may serve as basic references in determining resonant frequencies and modes of compressor and turbine blade vibrations.