Dynamics of Coronal Loop Oscillations Recent Improvements and Computational Aspects

We will discuss the observed, heavily damped transversal oscillations of coronal loops. These oscillations are often modeled as transversal kink oscillations in a cylinder. Several features are added to the classical cylindrical model. In our models we include loop curvature, longitudinal density stratification, and highly inhomogeneous radial density profiles. In this paper, we will first give an overview of recently obtained results, both analytically and numerically. After that, we shed a light on the computational aspects of the modeling process. In particular, we will focus on the parallellization of the numerical codes.     

氰酸酯树脂的发展概况

扼要从氰酸酯树脂的固化反应、改性途径和商品化氨酸酯树脂的特点等几方面介绍了国外近年来氰酸酯树脂的发展概况。氰酸酯树脂可作为航空高性能透波材料和结构复合材料的基体树脂使用。     

航空发动机实时寿命监视及数据处理方法研究

ＡＥＲＯＥＮＧＩＮＥＬＩＦＥＭＯＮＩＴＯＲＩＮＧＡＮＤＲＥＡＬ－ＴＩＭＥＤＡＴＡＰＲＯＣＥＳＳＩＮＧＨｅＪｉｎｇｌａｎ，ＨｏｎｇＪｉｅ，ＬｉＱｉｈａｎ（４ｔｈＤｅｐｔ．ＢｅｉｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｉｃｓａｎｄＡｓｔｒｏｎａｕ...     

螺桨滑流对全机绕流干扰的数值计算

 数值计算采用面元法。在桨叶及全机面元的控制点上强加 Neumann条件以实现滑流与全机流场的相互耦合。计算中考虑了三维螺桨滑流的收缩及其对流场的影响。最后对运七全机气动力作了计算。结果表明 ,滑流对全机放襟翼状态升力特性有明显影响 ,使全机力矩特性产生较大变化。计算结果与实验值吻合良好。该方法对单发或多发螺桨飞机均适用     

Ionization processes in the heliosphere — Rates and methods of their determination

The rates of the most important ionization processes acting in interplanetary space on interstellar H, He, C, O, Ne and Ar atoms are critically reviewed in the paper. Their long-term modulations in the period 1974 – 1994 are reexamined using updated information on relevant cross-sections as well as direct or indirect data on variations of the solar wind/solar EUV fluxes based on IMP 8 measurements and monitoring of the solar 10.7 cm radio emission. It is shown that solar cycle related variations are pronounced (factor of 3 between maximum and minimum) especially for species such as He, Ne, C for which photoionization is the dominant loss process. Species sensitive primarily to the charge-exchange (as H) show only moderate fluctuations 20% around average. It is also demonstrated that new techniques that make use of simultaneous observations of neutral He atoms on direct and indirect orbits, or simultaneous measurements of He⁺ and He⁺⁺ pickup ions and solar wind particles can be useful tools for narrowing the uncertainties of the He photoionization rate caused by insufficient knowledge of the solar EUV flux and its variations.     

电液力伺服系统的神经网络并行自适应预测 PI 控制

考虑电液伺服系统的复杂非线性和不确定性特性,提出一类基于神经网络的并行自适应预测PI控制结构,该结构使控制参数的调整和系统的实时控制操作可并行进行,不仅做到了神经模型和控制器的在线辨识和设计,而且避免了神经网络方法通常存在的实时控制的困难,使复杂系统的在线学习控制成为可能。仿真结果表明该控制器具有良好的适应性和鲁棒性。      

Effects of polarization and resolution on SAR ATR

Lincoln Laboratory is investigating the detection and classification of stationary ground targets using high resolution, fully polarimetric, synthetic aperture radar (SAR) imagery. A study is summarized in which data collected by the Lincoln Laboratory 33 GHz SAR were used to perform a comprehensive comparison of automatic target recognition (ATR) performance for several polarization/resolution combinations. The Lincoln Laboratory baseline ATR algorithm suite was used, and was optimized for each polarization/resolution case. Both the HH polarization alone and the optimal combination of HH, HV, and VV were evaluated; the resolutions evaluated were 1 ft/spl times/1 ft and 1 m/spl times/1 m. The data set used for this study contained approximately 74 km/sup 2/ of clutter (56 km/sup 2/ of mixed clutter plus 18 km/sup 2/ of highly cultural clutter) and 136 tactical target images (divided equally between tanks and howitzers).     

薄膜材料和纤维材料的热扩散率测量

介绍了激光热波技术用于测量薄膜材料和纤维材料热扩散率的测试系统，测试温度范围为２０－５００℃。讨论了测量中的各种试验条件、基本公式和误差分析。在理论上此系统可以应用于任何厚度样品面向热扩散率的测量。     

固体火箭发动机喷管座和壳体接头组合结构的优化设计

本文采用准则法和数学规划法相结合的方法成功地解决了固体火箭发动机喷管座和壳体接头组合结构的优化设计问题,为减轻结构质量,为寻求喷管座最佳型面和尺寸提供了有价值的方法和结论。以现有某结构为例,经过优化设计,质量降低 16.35%,明显地提高了发动机质量比。      

缺口根部小裂纹疲劳扩展特性及闭合效应实验研究

 对LY12CZ铝合金缺口根部疲劳小裂纹闭合特性及扩展行为进行了实验研究。采用光学金相显微镜测量了小裂纹的起裂及扩展。通过测量裂尖后两岸显微硬度压痕随裂纹张开闭合的距离变化,建立了缺口根部角裂纹裂尖附近的裂纹张开位移和载荷的关系,以此确定裂纹的张开应力。根据测得的σ_(op)/σ_(max)及按Newman模型计算的σ_(op)/σ_(max),进行闭合效应修正后算得的小裂纹疲劳扩展速率与实验结果基本符合。在小裂纹的情况下,所得结果与Newman方法所得结果相比,更为接近实际情况。