基于因子模糊化BP神经网络的磨损颗粒识别

在引入了一套磨粒形态学描述子来提取磨损颗粒的显微形态特征的基础上 ,采用人工神经网络技术 ,编制了用于磨损颗粒自动识别的 BP网络计算机模拟程序。在网络训练的过程中应用了本文引入的因子模糊化训练方法 ,使训练速度大大加快 ,以异或问题为例 ,速度可提高 5～ 1 0倍。应用此网络对磨粒测试库进行识别实验 ,识别正确率在 90 %以上 ,并且识别速度很快 ,大大优于传统的磨粒识别方法。     

数字地形数据的二维三次卷积插值

由于数字地形数据库是以网格的形式给出网格点上的地形高度信息，在低空突防轨迹优化过程中，往往需要非网格蹼地形的高度信息和地形曲面的导数，这些都是离散的地形数据库所无法提供的。对二维的地形数据进行插值是解决问题的有效手段。本文提出一种二维离散数据的插值方法－－二维三次卷积插值。该插值函数是地形曲面的三次逼近，具有连续的三阶导数，可以非常好地满足低空突防轨迹优化的需要。仿真结果表明，它具有比双线性插值和     

镀膜光纤声光相位调制器频率响应特性的研究

本文对光纤声光相位调制器（OF—AOPM）的频率特性进行研究。分析了OF—AOPM的调相原理，研究结果表明：在调制频率远离氧化锌压电薄膜的半波谐振频率的时候，光相位的调制不仅依靠径向应力。同时还依靠轴向应力。通过同时考虑径向和轴向应力的变化，得出了OF—AOPM在整个频率域范围内的响应特性。     

大客车局部优化造型对其使用性能的影响

随着车速的提高,汽车在行驶中受到的空气阻力便成为不可忽视的问题,因此与减阻节能相关的汽车优化造型也就显得越来越重要了。由于运动物体所受到的空气阻力系数的大小主要取决于它的头部的形状,因而我们对厢式大客车驾驶室前风窗区的几种不同造型在低速风洞中进行了测力的实验研究。实验结果表明,驾驶室前围不同形式的过渡是影响厢式客车空气阻力的重要因素。其中在适当的风窗倾角下,经过良好的圆化处理后,可使厢式大客车的空气阻力减小27%左右。这不仅节省了燃料的消耗,还可以提高汽车的最大行驶速度,改善其加速和爬坡能力。     

Recent developments in micrometeoroid simulation

In the first part the state of the art of the most advanced micrometeoroid simulation techniques is reviewed. Then a new accelerator is described, which was developed jointly by the Technische Universität München and the N.A.S.A. George C. Marshall Space Flight Center. Finally the use of this new technique is indicated for basic research in fields other than astronautics.     

High-Sensitivity Quartz Accelerometer for Measurements of Small Accelerations of Spacecraft

A quartz sensor of small accelerations with a capacitive transducer is designed and produced, allowing one to measure spacecraft accelerations with a resolution of 10^–7 m/s² in the range ±10^–1 m/s². The results of calibration of the sensor by the method of inclinations are presented.     

How we will go to Mars

This article studies the efficiency of ejecting waste generated by the life support system (LSS) of a manned spacecraft to reduce initial mass on low earth orbit. The spacecraft is used for a long-duration interplanetary mission and is equipped with either a chemical or a nuclear-thermal propulsion system. For this study we simulate an optimal control problem for a given spacecraft maneuver. An impulsive approximation of the optimal interplanetary spacecraft trajectory is assumed, which allows us to reduce the general optimal control problem to hierarchic structure of 'outer' and 'inner' subproblems. This structure is analyzed using the Pontryagin's Maximum principle. Numerical results, illustrating the efficiency of waste ejection are shown for typical Earth-Mars transfer trajectories. This results confirm in theory that using a waste ejection system makes an early manned Mars mission possible without having to design and build new, advanced biological LSS.     

摆动扫描地球敏感器数学模型及飞行试验结果

描述了东方红三号卫星(DFH-3)控制系统设计和数学仿真中采用的摆动扫描地球敏感器IRES-01的数学模型，东方红三号卫星近三年飞行试验结果与数学仿真结果基本一致，证明数学模型是正确的。     

Microgravity effects on water supply and substrate properties in porous matrix root support systems.

The control of water content and water movement in granular substrate-based plant root systems in microgravity is a complex problem. Improper water and oxygen delivery to plant roots has delayed studies of the effects of microgravity on plant development and the use of plants in physical and mental life support systems. Our international effort (USA, Russia and Bulgaria) has upgraded the plant growth facilities on the Mir Orbital Station (OS) and used them to study the full life cycle of plants. The Bulgarian-Russian-developed Svet Space Greenhouse (SG) system was upgraded on the Mir OS in 1996. The US developed Gas Exchange Measurement System (GEMS) greatly extends the range of environmental parameters monitored. The Svet-GEMS complex was used to grow a fully developed wheat crop during 1996. The growth rate and development of these plants compared well with earth grown plants indicating that the root zone water and oxygen stresses that have limited plant development in previous long-duration experiments have been overcome. However, management of the root environment during this experiment involved several significant changes in control settings as the relationship between the water delivery system, water status sensors, and the substrate changed during the growth cycles.     

印刷电路板缺陷焊点的自动检测

本文首先从国内外的发展现状,概述了印刷电路板缺陷焊点的几种检测手段。并着重介绍了作者与其同事们正在研制的激光全息印刷电路板焊点缺陷自动检测系统。