高强太阳光无线能量传输能量供给平台设计

为了满足微小卫星群落编队飞行技术快速发展的需要,设计了一种能量供给平台.该平台中菲涅尔透镜（太阳能聚集装置）收集空间太阳光,并将聚焦光能耦合进光纤束（柔性转向装置）以进行传输和换向.由3个薄透镜组成的透镜组（二次发射装置）将出射光线整合成高强平行光束进行光能传输,将光能以高强太阳光形式无线传输至航天器群落,实现能量供给.该能量供给平台能量收集传输效率可达到70%以上,在提高效率、降低成本方面具有一定的优越性.      

Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

采用排间界面静压约束伴随方法的多级压气机叶片优化

为解决伴随优化应用在多级压气机中出现的优化工况点漂移问题,在前期薄层N-S方程伴随方法基础上,对目标函数——出口熵增不仅施以质量流量、总压比约束,还添加排间界面静压展向分布作为新的约束条件.以某5级压气机为对象,对其中第1级转、静叶分别在首1.5级和全5级压气机环境下进行了优化.结果表明,施加排间界面静压展向分布约束能够显著解决优化工作点漂移问题,优化后5级压气机的效率提高0.4个百分点.      

空间相机热平衡试验温度预测方法改进及应用

为实现对航天器热平衡试验平衡温度的预测,建立了热平衡温度预测的方程式,对影响预测结果的各参数进行了分析。首先,由节点网络法推导出平衡温度表达式,介绍了其基于非线性最小二乘法的求解过程,建立了平衡温度的迭代方程;其次,结合大量的试验数据,对影响迭代结果的3个因素进行了统计分析,并最终确定了各因素的合理取值范围;最后,利用温度预测程序对某空间相机热平衡试验中低温工况的平衡温度进行了预测,并与试验结束后的结果进行了对比。结果表明,预测温度与试验数据的误差为±1℃（在3%之内）,满足精度要求,对热平衡温度准确的预测有效的缩短了试验时间,节省试验费用。     

基于自动有限元建模的民机机翼结构布局优化

针对民用飞机中广泛采用的双梁式机翼结构,以机翼结构纵向构件(长桁)和横向构件(翼肋)的数量为参数生成机翼CAD模型,然后基于Patran的PCL(Patran Command Language)语言,根据整体模型分割、局部模型编号、局部网格控制、整体有限元生成的思路,实现了以纵向和横向构件的数量变化为基础自动进行机翼结构有限元模型的构建及分析,并将上述流程集成到机翼结构的布局优化中.最后参照某大型民用飞机的机翼外形尺寸建立了CAD模型,以机翼的静强度、刚度和蒙皮稳定性为约束,以机翼结构质量最低为目标,对上、下蒙皮长桁和翼肋数量进行了优化.优化后的布局使机翼结构质量降低了10.1%,表明了布局优化方法的有效性和可行性.     

基于物理光学假设的导体表面电流密度误差分析

用物理光学法计算理想导体雷达散射截面过程中,需要基于无限大切平面假设计算表面电流密度.只有对表面比较光滑的电大尺寸目标,该假设才近似满足,而在一般情况下由该方法求得的表面电流密度存在误差.将二维导体圆柱、方柱以及三角柱等构型在不同入射频率、极化下的物理光学表面电流密度与精确解或矩量法结果进行了对比.分析表明:横磁波照射时物理光学法除在顶点处有较大误差外,基本能够正确反映出表面电流密度分布情况.横电波情形下物理光学法难以如实反映照射面和阴影面电流的谐振变化,与入射方向平行的面上表面电流密度也有较大误差.     

显示界面字符编码工效设计与分析

针对人机显示界面中字符编码的工效设计问题,以封闭模拟驾驶舱为基础,采用32名被试开展静态模拟实验,选取反应时间和反应正确率为工效评价指标,得出不同光照水平、颜色匹配和字符高度下显示界面呈现的中文、英文、数字及符号的辨识绩效.实验结果表明:中/英文、数字和普通符号的辨识绩效差异显著;0~600 lx范围内4个水平光照变化对字符编码辨识绩效影响较小;颜色匹配方式对字符编码辨识绩效影响显著,黄/白、绿/青的字符/背景色匹配方式辨识绩效较差,在字符编码设计中尽量避免使用.通过实验结论及对实验数据的深入分析,建立显示界面字符编码设计的数学模型,为飞机驾驶舱人机显示界面编码设计提供参考.     

整机产品失效机理危害度定量分析方法

针对整机产品失效机理多而复杂、失效数据少、主失效机理分析为定性方法的现状,提出了一种基于Bayes的失效机理危害度定量分析方法.首先利用Dirichlet分布描述产品的先验信息,结合现场失效数据确定失效频率的Bayes后验分布函数,然后通过Slice抽样方法获得失效频率的满条件分布,进而利用Gibbs抽样得到其Bayes估计,从而实现了各失效机理的定量分析.最后在某型光纤连接器失效机理已分析清楚的前提下,分别用FMMEA(Failure Modes,Mechanisms and Effects Analysis)及Bayes方法确定了其主失效机理,结果表明基于Bayes的失效机理危害度定量分析方法考虑了现场未出现的失效机理危害度,其确定的主失效机理比FMMEA结果更具有可信度.     

基于RTX的三轴仿真转台实时控制方法与实现CSCD

针对目前市场对三轴仿真转台控制系统的实时性需求,首先介绍了三轴仿真转台的控制系统,然后根据RTX的基本原理和转台控制系统的具体要求,采用"Windows+RTX"综合软件平台,设计并实现了转台的实时控制软件。实验表明,基于RTX的三轴仿真转台实时控制软件达到了系统的设计指标,实时性高,工作稳定可靠。     

Low-dose carbon ion irradiation effects on DNA damage and oxidative stress in the mouse testis

To investigate the effects of low-dose carbon ion irradiation on reproductive system of mice, the testes of outbred Kunming strain mice were whole-body irradiated with 0, 0.05, 0.1, 0.5 and 1 Gy, respectively. We measured DNA double-strand breaks (DNA DSBs) and oxidative stress parameters including malondialdehyde (MDA) content, superoxide dismutase (SOD) activity, and testis weight and sperm count at 12 h, 21 d and 35 d after irradiation in mouse testis. At 12 h postirradiation, a significant increase in DNA DSB level but no pronounced alterations in MDA content or SOD activity were observed in 0.5 and 1 Gy groups compared with the control group. At 21 d postirradiation, there was a significant reduction in sperm count and distinct enhancements of DSB level and MDA content in 0.5 and 1 Gy groups in comparison with control. At 35 d postirradiation, the levels of DNA DSBs and MDA, and SOD activity returned to the baseline except for the MDA content in 1 Gy (P < 0.05), while extreme falls of sperm count were still observed in 0.5 (P < 0.01) and 1 Gy (P < 0.01) groups. For the 0.05 or 0.1 Gy group, no differences were found in DNA DSB level and MDA content between control and at 12 h, 21 d and 35 d after irradiation, indicating that lower doses of carbon ion irradiation have no significant influence on spermatogenesis processes. In this study, male germ cells irradiated with over 0.5 Gy of carbon ions are difficult to repair completely marked by the sperm count. Furthermore, these data suggest that the deleterious effects may be chronic or delayed in reproductive system after whole-body exposure to acute high-dose carbon ions.