用热流探针测量激波速度

激波速度测量是激波管和激波风洞运行状态的一个重要参数,压电传感器或光学方法测速系统成本高,而传统电离探针在激波马赫数较低、波后温度达不到空气电离程度的情况下无法满足实验要求。提出了一种使用同轴热电偶作为测速探针来测激波速度的方法,弥补了电离探针在激波马赫数较低时的不足。介绍了同轴热电偶探针测速原理,并设计了测量激波速度的系统电路。通过信号放大电路锁定激波冲激信号,触发脉冲信号发生电路,实现了一种单通道、多测点的激波风洞测速系统。分别开展以温度与热流为触发信号的风洞实验,结果表明只有使用热流信号才能满足激波测速的时间要求。     

复合材料夹层结构在航空领域的应用

详细描述了复合材料夹层结构及几种常用芯材的性能特点,综合分析了复合材料夹层结构在飞机上的应用案例,对各种夹层结构芯材成型工艺的重点、难点进行了探析,得到了复合材料夹层结构的性能概况及使用工艺要求,可为复合材料夹层结构设计、制造提供参考。     

Identification method for helicopter flight dynamics modeling with rotor degrees of freedom

A comprehensive method based on system identification theory for helicopter flight dynamics modeling with rotor degrees of freedom is developed. A fully parameterized rotor flapping equation for identification purpose is derived without using any theoretical model, so the confidence of the identified model is increased, and then the 6 degrees of freedom rigid body model is extended to 9 degrees of freedom high-order model. Bode sensitivity function is derived to increase the accuracy of frequency spectra calculation which influences the accuracy of model parameter identification. Then a frequency domain identification algorithm is established. Acceleration technique is developed furthermore to increase calculation efficiency, and the total identification time is reduced by more than 50% using this technique. A comprehensive two-step method is established for helicopter high-order flight dynamics model identification which increases the numerical stability of model identification compared with single step algorithm. Application of the developed method to identify the flight dynamics model of BO 105 helicopter based on flight test data is implemented. A comparative study between the high-order model and rigid body model is performed at last. The results show that the developed method can be used for helicopter high-order flight dynamics model identification with high accuracy as well as efficiency, and the advantage of identified high-order model is very obvious compared with low-order model.     

重庆机床集团YD31125CNC6大型数控机床

日前,由重庆机床(集团)有限责任公司研制的用于风力发电行业大模数齿轮加工的YD31125CNC6大型数控滚齿机首次完成了大模数齿轮的加工试切,工件参数为模数m=20mm,齿数Z=25,齿宽B=140mm,外径D=540mm,一刀切加工精度达到了GB10095-2001IT7级,这表明为风力发电行业齿轮加工量身打造的大型全数控滚齿机的关键技术研制已取得成功.     

用于波音787的新型复合材料机翼除冰系统

在机械系统方面,现代商业飞机通常采用一系列管道从发动机内部引入加热的空气,通过加热空气在结冰机翼表面内侧的流动加热附近的机翼表面,从而达到除冰的目的。但是这不仅会使设计变得复杂,同时还会降低发动机的有效推力。所以,多年来研究人员一直在开发一种替代技术,即向机翼前缘表层里面置入导电元件来直接加热机翼表面,使冰层不会聚集变厚。     

UG NX在数控编程中的应用技巧

随着CAD、CAM、CAE等技术的不断发展和日趋完善,它们在各个领域得到了极其广泛的应用.     

High Range Resolution Profile Automatic Target Recognition Using Sparse Representation

Sparse representation is a new signal analysis method which is receiving increasing attention in recent years. In this article, a novel scheme solving high range resolution profile automatic target recognition for ground moving targets is proposed. The sparse representation theory is applied to analyzing the components of high range resolution profiles and sparse coefficients are used to describe their features. Numerous experiments with the target type number ranging from 2 to 6 have been implemented. Results show that the proposed scheme not only provides higher recognition preciseness in real time, but also achieves more robust performance as the target type number increases.     

闭链空间机械臂抓持载荷基于积分滑模的模糊自适应控制

讨论了载体位置、姿态均不受控制情况下,漂浮基闭链双臂空间机器人抓持系统的动力学建模与控制问题.利用拉格朗日方法和牛顿-欧拉法,分别建立了双臂空间机器人及抓持负载的动力学模型,并结合漂浮基空间机器人固有的线动量和角动量守恒动力学特性及闭合链约束几何关系,获得了抓持系统合成动力学方程.以此为基础,考虑到闭链双臂空间机器人系统结构的复杂性及某些参数的变动性,根据模糊控制理论和Lyapunov稳定性理论,设计了系统参数不确定情况下该抓持系统基于积分滑模面的力/位置模糊自适应协调控制方案,从而达到对抓持负载位置与所受内力的双重控制效果.系统数值仿真证明了控制方案的有效性与精确性.     

MES将航空制造引向新水平

MES必须借助于信息技术才能够实现。可以按照MES理念建立独立的生产管理信息系统,也可以将MES理念融入到现有的ERP软件系统中,构成统一的更大范围集成的企业信息系统。但是,MES绝不仅仅是一种管理生产的"信息系统",MES是计划管理与控制系统在近十几年来的新突破,是企业更深刻地实现制造过程集成与信息集成的理想和远景的新阶段。     

一种定向凝固高温合金低周疲劳性能的研究

研究了同成分合金在定向凝固（ＤＳ）和普通铸造（ＣＣ）状态下７６０℃的低周疲劳性能。结果表明，ＤＳ合金的疲劳寿命比ＣＣ合金在应力控制条件下高２倍左右，而在应变控制条件下可提高寿命２０倍左右。ＣＣ合金的疲劳裂纹往往萌生在与表面相连的晶界或某些缺陷（如孔洞）上，由外向内沿晶界扩展。而ＤＳ合金裂纹则起源于纵向晶界的横段或预开裂的碳化物，并沿枝晶间穿枝干扩展。