Investigation of thermosolutally caused convection during -growth of BiSbTe3-mixed crystals at normal and reduced gravity

BiSbTe₃-mixed crystals have been grown at normal and reduced gravity (during the MIR'97-mission) using a -configuration of the TITUS facility. The distribution of the components in the melt, and so the homogeneity of the growing crystal, is strongly influenced by the flow in the melt even in the case of weak convection. The flow configuration in the melt especially in front of the solid-liquid phase boundary can be investigated by means of a segregation analysis of the system components and an additional Pb-dopant. The BiSbTe₃-system is because of its hydro-dynamic properties a typical representative of semiconductor melts (low number, high number) but there are also some special properties relating to the segregationally caused enrichment of the lighter tellurium at the phase boundary and the resulting solutal destabilities. Experimental experiences from segregation analysis have shown that the mass transport in the melt at normal gravity is mainly influenced by convective mixing determined by thermally and solutally caused buoyancy forces. Numerical simulations have been performed for the real experimentally used configurations. These simulations have shown that a strong coupling of thermal and solutal effects exists and have given axial as well as radial segregation profiles being in excellent agreement with the experimental results for the vertical normal gravity grown crystals. For micro gravity conditions a reduction of the flow velocity of more than two orders of magnitude (depending on the micro gravity level and the direction of the residual acceleration) resulting in diffusion controlled component segregation has been predicted.The results of the two micro gravity grown crystals, especially the axial and radial segregation profiles as a sensitive indicator for the flow configuration in front of the phase boundary will be given and discussed in the paper. They will be compared with the results of numerical simulations of the melt flow for the real processing parameters measured during the TITUS growth processes and with experimental as well as numerical results for vertical normal gravity grown reference Samples.     

Low and medium energy gamma-ray astronomy — present status and future aspects

During the last few years quite some progress has been achieved in the field of low and medium energy gamma-ray astronomy below about 30 MeV. Gamma rays from the galactic center and anti-center region have been detected, which require a high interstellar electron flux in the 100 MeV range, if they are predominantly diffuse in nature. Though the Crab pulsar and its nebula are still the only galactic gamma-ray sources which definitely have been detected, some recently determined upper limits to the gamma-ray fluxes of other radio pulsars are close to the theoretically expected values. Active galaxies seem to have a maximum of luminosity in the range between several 100 keV and a few MeV and, therefore, are of special interest. First observational results have been reported on the Seyfert galaxies NGC 4151 and MCG 8-11-11, and the radio galaxy CenA. The nature of the diffuse cosmic gamma-ray component at low gamma-ray energies is not yet solved. Unresolved active galaxies are good candidates for its origin.Considering the present status of gamma ray astronomy the study of galactic sources like radio pulsars and the unidentified high energy gamma-ray sources, the Milky Way as a whole, active galaxies and the diffuse cosmic sky seem to be the prime targets for broad band observations below 30 MeV in the GRO area. An unexplored field like that of low energy gamma-ray astronomy, however, is always open for surprises.     

固化过程可视化:采用集成的超声传感器监测交联反应过程

在工艺过程中,树脂的反应程度或固化度通常因为其不会导致可见的缺陷,所以常被忽视.然而,未完全固化的产品会对最终的力学性能产生很大的影响,在使用过程中伴随有较大温度变化的情况下尤其如此.     

A material experiment for small satellites to characterise the behaviour of carbon nanotubes in space – development and ground validation

Over the last years, Carbon Nanotubes (CNT) drew interdisciplinary attention. Regarding space technologies a variety of potential applications were proposed and investigated. However, no complex data on the behaviour and degradation process of carbon nanotubes under space environment exist. Therefore, it is necessary to investigate the performance of these new materials in space environment and to revaluate the application potential of CNTs in space technologies.Hence, CiREX (Carbon Nanotubes – Resistance Experiment) was developed as a part of a student project. It is a small and compact experiment, which is designed for CubeSat class space satellites. These are a class of nanosatellites with a standardized size and shape. The CiREX design, electrical measurements and the satellites interfaces will be discussed in detail. CiREX is the first in-situ space material experiment for CNTs.To evaluate the data obtained from CiREX, ground validation tests are mandatory. As part of an extensive test series the behaviour of CNTs under solar ultra violet light (UV) and vacuum ultraviolet light (VUV) was examined. Single-walled carbon nanotubes (SWNT), multi-walled carbon nanotubes (MWNT) and MWNT/resin composite (ME) were exposed to different light sources. After the exposure, the defect density was investigated with Raman spectroscopy. There is a clear indication that UV and VUV light can increase the defect density of untreated CNTs and influence the electrical behaviour.     

Simultaneous determination of aerosol- and surface characteristics from top-of-atmosphere reflectance using MERIS on board of ENVISAT

The determination of aerosol optical thickness (AOT) from nadir scanning multi-spectral radiometers, like SeaWiFS, MERIS or MODIS, requires the separation of spectral atmospheric and surface properties. Since SeaWiFS and MERIS do not provide information at 2.1 μm, like MODIS, the estimation of the surface reflectance cannot be made by the cross correlation approach described by Kaufman et al., 1997. The BAER approach (Bremen AErosol Retrieval), von Hoyningen-Huene et al., 2003, uses a linear mixing model of spectra for ‘green vegetation’ and ‘bare soil’, tuned by the NDVI, determining an apparent surface to enable this separation of aerosol and surface properties from VIS and NIR channels. Thus AOT can be derived over a wide range of land surfaces for wavelengths <0.67 μm. Using MERIS L1 data over Europe, the AOT retrieved is comparable with ground-based observations, provided by AERONET. Regional variation of AOT can be observed, showing the atmospheric variability for clear sky conditions by: large scale variation of aerosol turbidity, regional pollution, urban regions, effects of contrails and cases of aerosol-cloud interaction. Simultaneously with the spectral AOT also spectral surface reflectance is obtained, where all atmospheric influences have been considered (molecules, aerosols and absorbing gases (O₃)) for channels with wavelengths <0.67 μm. The AOT is extrapolated by Angström power law to NIR channels and the atmospheric correction for land surface properties is performed, enabling the further investigation of land use and spectral land properties.     

Heavy ion induced double strand breaks in bacteria and bacteriophages.

DNA damage induced by heavy ions in bacterial cells and bacteriophages such as Bacillus subtilis, E. coli and Bacteriophage T1 were investigated by analyzing the double strand breaks in the chromosomal DNA. This kind of lesion is considered as one of the main reasons for lethal events. To analyze double strand breaks in long molecules of DNA--up to some Mbp in length--the technique of pulse field agarose gel electrophoresis has been used. This allows the detection of one double strand break per genome. Cell lysis and DNA isolation were performed in small agarose blocks directly. This procedure secured minimum DNA destruction by shearing forces. After running a gel, the DNA was stained with ethidium bromide. The light intensity of ethidium bromide fluorescence for both the outcoming (running) DNA and the remaining intact DNA were measured by scanning. The mean number of double strand breaks was calculated by determining the quotient of these intensities. Strand break induction after heavy ion and X-ray irradiation was compared.     

Water in the Earth’s Interior: Distribution and Origin

Space Science Reviews - The concentration and distribution of water in the Earth has influenced its evolution throughout its history. Even at the trace levels contained in the planet’s deep...     

Adaptive Phased-Array Tracking in ECM using Negative Information

Target tracking with adaptive phased-array radars in the presence of standoff jamming presents both challenges and opportunities to the track filter designer. A measurement likelihood function is derived for this situation which accounts for the effect of both positive and negative contact information. This likelihood function is approximated a? a weighted sum of Gaussian terms consisting of both positive and negative weights, accounting for the positive and negative contact information. Additionally, recent theoretical results have been reported which have derived an accurate measurement error covariance in the vicinity of the jammer when adaptive beamforming is used by the radar to null the effects of the jammer. We compare the impact of using a likelihood function that accounts for negative contact information and the corrected measurement error covariance by comparing five Kalman filter-based trackers in five different scenarios. We show that only those track filters which use both the negative contact information and the corrected measurement error covariance are effective in maintaining track on a maneuvering target as it passes through the jamming region. This approach can also be generalized to any target tracking problem where the sensor response is anisotropic.     

Advanced data acquisition system for SEVAN

Huge magnetic clouds of plasma emitted by the Sun dominate intense geomagnetic storm occurrences and simultaneously they are correlated with variations of spectra of particles and nuclei in the interplanetary space, ranging from subtermal solar wind ions till GeV energy galactic cosmic rays. For a reliable and fast forecast of Space Weather world-wide networks of particle detectors are operated at different latitudes, longitudes, and altitudes. Based on a new type of hybrid particle detector developed in the context of the International Heliophysical Year (IHY 2007) at Aragats Space Environmental Center (ASEC) we start to prepare hardware and software for the first sites of Space Environmental Viewing and Analysis Network (SEVAN). In the paper the architecture of the newly developed data acquisition system for SEVAN is presented. We plan to run the SEVAN network under one-and-the-same data acquisition system, enabling fast integration of data for on-line analysis of Solar Flare Events. An Advanced Data Acquisition System (ADAS) is designed as a distributed network of uniform components connected by Web Services. Its main component is Unified Readout and Control Server (URCS) which controls the underlying electronics by means of detector specific drivers and makes a preliminary analysis of the on-line data. The lower level components of URCS are implemented in C and a fast binary representation is used for the data exchange with electronics. However, after preprocessing, the data are converted to a self-describing hybrid XML/Binary format. To achieve better reliability all URCS are running on embedded computers without disk and fans to avoid the limited lifetime of moving mechanical parts. The data storage is carried out by means of high performance servers working in parallel to provide data security. These servers are periodically inquiring the data from all URCS and storing it in a MySQL database. The implementation of the control interface is based on high level web standards and, therefore, all properties of the system can be remotely managed and monitored by the operators using web browsers. The advanced data acquisition system at ASEC in Armenia was started in November, 2006. The reliability of the multi-client service was proven by continuously monitoring neutral and charged cosmic ray particles. Seven particle monitors are located at 2000 and 3200 m above sea level at a distance of 40 and 60 km from the main data server.     

Coronal Hole Properties Observed with Sumer

We analyze SUMER spectra of 14 lines belonging to 12 ions, obtained on both sides of the boundary of polar coronal holes as well as at other locations along the limb. We compare line intensities, shifts and widths in coronal holes with values obtained in the quiet Sun. We find that with increasing formation temperature, spectral lines show an increasingly stronger blueshift in coronal holes relative to the quiet Sun at an equal heliospheric angle. The width of the lines is generally larger (by a few km/s) inside the coronal hole. Intensity measurements show the presence of the coronal hole in Ne VIII lines as well as in Fe XII, with evidence for a slightly enhanced emission in polar coronal holes for lines formed below 10⁵ K. This revised version was published online in June 2006 with corrections to the Cover Date.