Do we know the cosmic-ray boosters?

The literature on cosmic-ray acceleration tends to favour strong shocks (in supernovae, stellar and galactic winds) over compact boosters. Difficulties are posed by the spectrum which does not reveal the implied upper cutoff (at E = 10^13±1 eV), by the energy-dependent anisotropy at the high-energy end (at E 10¹⁸ eV), the missing hydrogen, the large required boosting efficiency, the high positron abundance at E 10 GeV, detailed studies of supernova shells, and by an inadequacy of the Sedov-Taylor model for supernova explosions. Solar and solar-wind data support single-step or few-step accelerations because of the large observed anisotropies and short time scales.

The importance of spindown in compact binary systems is often underestimated. Several neutron-star binaries have been detected at cosmic γ-ray energies. Cosmic-ray escape from the Galaxy may proceed supersonically through narrow tubes rather than via convective diffusion.     

High resolution spectro-polarimetry with a large balloon-borne solar telescope

The balloon mission “Sunrise” consists of a 1m lightweight solar telescope equipped with a powerful spectro-graph-polarimeter and a multi-channel filtergraph for the visible and the UV. The science goals of Sunrise are focussed on, but not limited to, the investigation of the solar surface magnetism. The key questions include the generation and maintenance of the variable magnetic field, the structure and dynamics of the chromosphere, and the interaction of material flow and magnetic field in sunspots.     

An assessment of the Qualified Manufacturer List (QML)

The Qualified Manufacturer List (QML) approach, detailed in MIL-I-38535, General Specification for Integrated Circuits (Microcircuit) Manufacturing, embraces many of the commercial practices employed by high volume microcircuit suppliers. Nevertheless, with the availability of highly reliable and lower cost commercial parts, the QML approach becomes unnecessary and undesirable. In this paper we attempt to show why US government support of the QML program is leading the military and government to unaffordable access to out-dated technologies, damaging our country's military and avionics position. We will present information to show why we support the retraction of MIL-PRF-38535 and any other documents which imply that QML parts are superior to commercial parts, including those of QPL, MIL-STD-454, and MIL-HDBK-217 (now prohibited from use in all new Army programs)     

Investigation of thermosolutally caused convection during -growth of BiSbTe3-mixed crystals at normal and reduced gravity

BiSbTe₃-mixed crystals have been grown at normal and reduced gravity (during the MIR'97-mission) using a -configuration of the TITUS facility. The distribution of the components in the melt, and so the homogeneity of the growing crystal, is strongly influenced by the flow in the melt even in the case of weak convection. The flow configuration in the melt especially in front of the solid-liquid phase boundary can be investigated by means of a segregation analysis of the system components and an additional Pb-dopant. The BiSbTe₃-system is because of its hydro-dynamic properties a typical representative of semiconductor melts (low number, high number) but there are also some special properties relating to the segregationally caused enrichment of the lighter tellurium at the phase boundary and the resulting solutal destabilities. Experimental experiences from segregation analysis have shown that the mass transport in the melt at normal gravity is mainly influenced by convective mixing determined by thermally and solutally caused buoyancy forces. Numerical simulations have been performed for the real experimentally used configurations. These simulations have shown that a strong coupling of thermal and solutal effects exists and have given axial as well as radial segregation profiles being in excellent agreement with the experimental results for the vertical normal gravity grown crystals. For micro gravity conditions a reduction of the flow velocity of more than two orders of magnitude (depending on the micro gravity level and the direction of the residual acceleration) resulting in diffusion controlled component segregation has been predicted.The results of the two micro gravity grown crystals, especially the axial and radial segregation profiles as a sensitive indicator for the flow configuration in front of the phase boundary will be given and discussed in the paper. They will be compared with the results of numerical simulations of the melt flow for the real processing parameters measured during the TITUS growth processes and with experimental as well as numerical results for vertical normal gravity grown reference Samples.     

The Role of Scientific and Engineering Societies in Development: Present Perspectives and Future Prospects

There can be no doubt that engineers and scientists have a vital role to play in the developmental processes by which the na tions of the Third World will bring greater health, safety, pro sperity and self-reliance to their peoples, but the role that the professionalengineering and scientific societies must play re mains undefined. In this paper the roles these societies perform for themselves and their members are defined, how they have been and are becoming effective in the international sphere at large is examined, and how they are and can become effective in that most difficult area of international relations, the mutual support of the developed and the developing nations is described. Only the particular set of professional societies whose members practice engineering, the applications of natural science, and social science are discussed. These three groups are involved with the special needs of the developing countries only on a limited scale. They have a much larger role to play than they presently undertake, a heavier responsibility, in fact, than many of them understand is demanded of them.     

固化过程可视化:采用集成的超声传感器监测交联反应过程

在工艺过程中,树脂的反应程度或固化度通常因为其不会导致可见的缺陷,所以常被忽视.然而,未完全固化的产品会对最终的力学性能产生很大的影响,在使用过程中伴随有较大温度变化的情况下尤其如此.     

Simultaneous determination of aerosol- and surface characteristics from top-of-atmosphere reflectance using MERIS on board of ENVISAT

The determination of aerosol optical thickness (AOT) from nadir scanning multi-spectral radiometers, like SeaWiFS, MERIS or MODIS, requires the separation of spectral atmospheric and surface properties. Since SeaWiFS and MERIS do not provide information at 2.1 μm, like MODIS, the estimation of the surface reflectance cannot be made by the cross correlation approach described by Kaufman et al., 1997. The BAER approach (Bremen AErosol Retrieval), von Hoyningen-Huene et al., 2003, uses a linear mixing model of spectra for ‘green vegetation’ and ‘bare soil’, tuned by the NDVI, determining an apparent surface to enable this separation of aerosol and surface properties from VIS and NIR channels. Thus AOT can be derived over a wide range of land surfaces for wavelengths <0.67 μm. Using MERIS L1 data over Europe, the AOT retrieved is comparable with ground-based observations, provided by AERONET. Regional variation of AOT can be observed, showing the atmospheric variability for clear sky conditions by: large scale variation of aerosol turbidity, regional pollution, urban regions, effects of contrails and cases of aerosol-cloud interaction. Simultaneously with the spectral AOT also spectral surface reflectance is obtained, where all atmospheric influences have been considered (molecules, aerosols and absorbing gases (O₃)) for channels with wavelengths <0.67 μm. The AOT is extrapolated by Angström power law to NIR channels and the atmospheric correction for land surface properties is performed, enabling the further investigation of land use and spectral land properties.     

Adaptive Phased-Array Tracking in ECM using Negative Information

Target tracking with adaptive phased-array radars in the presence of standoff jamming presents both challenges and opportunities to the track filter designer. A measurement likelihood function is derived for this situation which accounts for the effect of both positive and negative contact information. This likelihood function is approximated a? a weighted sum of Gaussian terms consisting of both positive and negative weights, accounting for the positive and negative contact information. Additionally, recent theoretical results have been reported which have derived an accurate measurement error covariance in the vicinity of the jammer when adaptive beamforming is used by the radar to null the effects of the jammer. We compare the impact of using a likelihood function that accounts for negative contact information and the corrected measurement error covariance by comparing five Kalman filter-based trackers in five different scenarios. We show that only those track filters which use both the negative contact information and the corrected measurement error covariance are effective in maintaining track on a maneuvering target as it passes through the jamming region. This approach can also be generalized to any target tracking problem where the sensor response is anisotropic.     

Advanced data acquisition system for SEVAN

Huge magnetic clouds of plasma emitted by the Sun dominate intense geomagnetic storm occurrences and simultaneously they are correlated with variations of spectra of particles and nuclei in the interplanetary space, ranging from subtermal solar wind ions till GeV energy galactic cosmic rays. For a reliable and fast forecast of Space Weather world-wide networks of particle detectors are operated at different latitudes, longitudes, and altitudes. Based on a new type of hybrid particle detector developed in the context of the International Heliophysical Year (IHY 2007) at Aragats Space Environmental Center (ASEC) we start to prepare hardware and software for the first sites of Space Environmental Viewing and Analysis Network (SEVAN). In the paper the architecture of the newly developed data acquisition system for SEVAN is presented. We plan to run the SEVAN network under one-and-the-same data acquisition system, enabling fast integration of data for on-line analysis of Solar Flare Events. An Advanced Data Acquisition System (ADAS) is designed as a distributed network of uniform components connected by Web Services. Its main component is Unified Readout and Control Server (URCS) which controls the underlying electronics by means of detector specific drivers and makes a preliminary analysis of the on-line data. The lower level components of URCS are implemented in C and a fast binary representation is used for the data exchange with electronics. However, after preprocessing, the data are converted to a self-describing hybrid XML/Binary format. To achieve better reliability all URCS are running on embedded computers without disk and fans to avoid the limited lifetime of moving mechanical parts. The data storage is carried out by means of high performance servers working in parallel to provide data security. These servers are periodically inquiring the data from all URCS and storing it in a MySQL database. The implementation of the control interface is based on high level web standards and, therefore, all properties of the system can be remotely managed and monitored by the operators using web browsers. The advanced data acquisition system at ASEC in Armenia was started in November, 2006. The reliability of the multi-client service was proven by continuously monitoring neutral and charged cosmic ray particles. Seven particle monitors are located at 2000 and 3200 m above sea level at a distance of 40 and 60 km from the main data server.