A satellite schedulability prediction algorithm for EO SPS

With notably few exceptions, the existing satellite mission operations cannot provide the ability of schedulability prediction, including the latest satellite planning service (SPS) standard-Sensor Planning Service Interface Standard 2.0 Earth Observation Satellite Tasking Extension (EO SPS) approved by Open Geospatial Consortium (OGC). The requestor can do nothing but waiting for the results of time consuming batch scheduling. It is often too late to adjust the request when receiving scheduling failures. A supervised learning algorithm based on robust decision tree and bagging support vector machine (Bagging SVM) is proposed to solve the problem above. The Bagging SVM is applied to improve the accuracy of classification and robust decision tree is utilized to reduce the error mean and error variation. The simulations and analysis show that a prediction action can be accomplished in near real-time with high accuracy. This means the decision makers can maximize the probability of successful scheduling through changing request parameters or take action to accommodate the scheduling failures in time.     

光刻技术在金属板片刻蚀上的应用

介绍了应用双面自对准光刻技术刻蚀金属板片的工艺原理、方法、工艺参数的选取原则以及双面自对准光刻模具设计准则,该项技术已成功应用于液体火箭发动机层板喷注器和膜片阀的研制和生产之中。     

基于Ansys某型气密接头泄露率试验台的设计

创新性的构建气密接头试验台以对某型气密接头的各参数进行测量。通过控制电机的正反转、高压舱室和大气压的压力差,完成对钢丝绳与气密接头相对往返运动、接头两端的压差等工作状况的模拟,并利用Ansys对试验舱体仿真优化,利用最佳参数进行制造,取得了实际结果。     

Coupled fluid-thermal investigation on non-ablative thermal protection system with spiked body and opposing jet combined configuration

In this paper, a Non-Ablative Thermal Protection System(NATPS) with the spiked body and the opposing jet combined configuration is proposed to reduce the aerodynamic heating of the hypersonic vehicle, and the coupled fluid-thermal numerical analysis is performed to study the thermal control performance of the NATPS. The results show that the spiked body pushes the bow shock away from the protected structure and thus reduces the shock intensity and the wall heat flux. In addition, the low temperature gas of the opposing jet separates the high temperature gas behind the shock from the nose cone of the spiked body, ensuring the non-ablative property of the spiked body. Therefore, the NATPS reduces the aerodynamic heating by the reconfiguration of the flow field, and the thermal control efficiency of the system is better than the Thermal Protection System(TPS) with the single spiked body and the single opposing jet. The influencing factors of the NATPS are analyzed. Both increasing the length of the spiked body and reducing the total temperature of the opposing jet can improve the thermal control performance of the NATPS and the nonablative property of the spiked body. However, increasing the heat conductivity coefficient of the spiked body can enhance benefit the non-ablative property of the spiked body, but has little influence on the thermal control performance of the NATPS.     

西安临空经济示范区发展思路探析

2018年4月,西安临空经济示范区获批,开启了西部内陆地区临空经济发展的新征程。为了捋清西安临空经济示范区的发展思路,本文在分析示范区发展现状的基础上,指出示范区尚存政策支持散而弱、管理体制不合理、产业优势待发挥、协同发展力不足等问题,提出示范区应紧抓临空经济发展窗口期机遇,通过构建扶持政策体系,理顺管理体制,遵循临空经济规律,发挥"自贸+临空经济"叠加优势,实施差异化产业策略,编织联运交通网络等加快临空经济发展。     

转子分段斜极对永磁伺服电机性能的影响

着重研究不同分段斜极段数对转矩波动和噪声的影响。通过Ansoft软件进行3D电磁场计算,并将3D场计算的气隙磁密进行矢量相加,利用Ansys软件将叠加后的平均气隙磁密进行2D声场计算,将分段斜极复杂的3D声场计算简单化,同时提出一种将转子分成两段斜极结构的简单工艺,并总结了满足该工艺的设计要求。通过试验验证,该仿真计算与试验基本一致,为该类电机设计计算提供参考。     

FRP层合板抗冲击能力与损伤面积的经验估计法

纤维增强树脂基复合材料（Fiber reinforced polymer, FRP）层合板的冲击损伤面积是衡量损伤严重程度的主要表征参数。本文依据冲击损伤演化特征将冲击损伤演化过程划分为4个阶段。基于弹簧-质量模型对FRP层合板产生初始分层的损伤门槛值进行计算,而后以一组对照试验确定层合板损伤面积随冲击能量的变化速率,最终建立了冲击损伤面积的经验估算模型。选取3种不同材料的冲击试验数据进行了统计验证,对比分析结果表明预测模型具有良好的预测精度,且计算简单。     

基于DUEA的天线伺服控制系统仿真

大口径射电望远镜天线易受到外部阵风等扰动、系统不确定及难以实现高指向精度的问题,为实现系统的高性能指标,提出了基于回路成形和扰动/不确定观测补偿(DUEA)的思想的方法.首先,使用混合灵敏度H∞设计方法对标称模型设计主控制器来实现对输入信号的最优跟踪;然后,针对影响系统输出的外部扰动以及系统不确定部分,基于等效输入扰动...     

新型损伤容限钛合金高速铣削表面完整性分析(英文)

研究新型损伤容限钛合金TC21在不同的刀具磨损状态下,采用高速铣削与常规铣削的加工表面完整性,重点研究表面粗糙度、加工硬化层、金相组织等因素对表面完整性的影响。结果表明,高速铣削能够获得良好的表面质量并提高加工的效率,同时通过观察加工硬化层与金相组织可以发现,即使是刀具在严重磨损的状态下,也不会出现比较严重的加工硬化现象。     

合金元素Y对高铌TiAl高温合金长期抗氧化性的影响

研究不同含Y量对高铌TiAl合金在900℃恒温条件下,1000h的抗氧化性的影响.结果发现,从长期看,氧化速率、氧化膜结构以及氧化膜抗剥落能力均与Y含量有关.在900℃等温氧化条件下,0.4 at%Y含量能有效提高高铌TiAl合金的抗氧化性,而高Y含量对与抗氧化性的负面影响在氧化初始阶段已经十分明显.通过对氧化后样品SEM和EDS分析发现,适量Y元素的加入可以细化氧化物颗粒,促使合金表面形成连续Al2O3保护膜,提高氧化膜与合金基体的粘附性,从而提高高铌TiAl合金的高温长期抗氧化性.