基于模型的数字化定义技术

基于模型的数字化定义技术以三维产品模型为基础,集成了三维空间尺寸公差标注和制造要求标注在内的特征信息,在脱离了二维工程图纸应用的情况下,实现对产品特征描述、共享,满足信息系统的直接传递要求,并实现对产品信息的分类管理。结合我国787飞机转包生产,分析了基于模型的定义技术的应用情况。     

阳极层霍尔推力器的阳极分段形式对内磁极刻蚀速率的影响

由于推力器内径向电势和等离子体的分布会影响轰击推力器器壁离子的运动,本文通过阳极的不同分段形式来改变推力器内电势分布,进而研究推力器阳极的不同分段形式对内磁极的刻蚀速率分布。首先利用PIC方法研究入射离子的数量和能量分布,接着对内磁极内表面和上表面的刻蚀速率进行仿真计算。由结果可知：入射到内磁极两个面上的离子数量和能量,都是在三分段阳极时达到最大值,其他三种情况偏低。对于内磁极内表面和上表面的刻蚀速率也是在三分段阳极时最大,其次是单阳极,而二、四分段阳极时的刻蚀速率最小。最后通过单阳极和二分段阳极时刻蚀速率的试验结果对比,验证了此研究结果的正确性,为下一步提高推力器的寿命研究提供了参考数据和研究方法。     

本地标准时间频率的产生与保持

近年来，地方协调时UTC(BIRM)守时能力稳步提升，截至目前，UTC(BIRM)与UTC的相对频率偏差优于3E-14，时间偏差优于20ns。本文概括介绍了守时系统的组成，本地频率驾驭与主备同步技术，以及TA(BIRM)算法研究等。     

一种使用磁力矩器管理双自旋航天器角动量的方法

针对一种新型采用双自旋设计进行对地遥感任务的航天器，提出了一种使用磁力矩器对旋转载荷角动量进行管理的方法。使用旋转载荷固连正交安装的三只磁力矩器，在旋转过程中连续输出周期性变化的磁矩，使自转一周过程中产生的合角动量方向仅沿自转轴方向，避免在其他两轴方向产生角动量累积。该方法在工程上可行性好，仿真结果表明旋转载荷角动量持续保持在期望值附近，不随时间累加。     

原子时系统主备钟同步技术研究

主钟系统作为原子时系统的重要组成部分，其运行状态直接关系到整个原子时系统的性能。为了提高系统的可靠性，建立备份主钟系统尤为必要。本文围绕原子时系统中的主备钟同步技术开展相关研究，建立了主备钟同步系统。通过分析原子钟性能，建立钟差模型；并根据钟差模型对备份主钟的频率进行驾驭调整，实现主备钟之间的时间频率一致性。通过调整，原子时系统的主备钟时差可实时保持在1ns以内，频率偏差实时保持在10E-15量级，为原子时系统的主备无缝切换奠定良好基础。     

A triangle voting algorithm based on double feature constraints for star sensors

A novel autonomous star identification algorithm is presented in this study. In the proposed algorithm, each sensor star constructs multi-triangle with its bright neighbor stars and obtains its candidates by triangle voting process, in which the triangle is considered as the basic voting element. In order to accelerate the speed of this algorithm and reduce the required memory for star database, feature extraction is carried out to reduce the dimension of triangles and each triangle is described by its base and height. During the identification period, the voting scheme based on double feature constraints is proposed to implement triangle voting. This scheme guarantees that only the catalog star satisfying two features can vote for the sensor star, which improves the robustness towards false stars. The simulation and real star image test demonstrate that compared with the other two algorithms, the proposed algorithm is more robust towards position noise, magnitude noise and false stars.     

Bifurcation analysis of polynomial models for longitudinal motion at high angle of attack

To investigate the longitudinal motion stability of aircraft maneuvers conveniently, a new stability analysis approach is presented in this paper. Based on describing longitudinal aerodynamics at high angle-of-attack (a < 50 ) motion by polynomials, a union structure of two-order differential equation is suggested. By means of nonlinear theory and method, analytical and global bifurcation analyses of the polynomial differential systems are provided for the study of the nonlinear phenomena of high angle-of-attack flight. Applying the theories of bifurcations, many kinds of bifurcations, such as equilibrium, Hopf, homoclinic (heteroclinic) orbit and double limit cycle bifurcations are discussed and the existence conditions for these bifurcations as well as formulas for calculating bifurcation curves are derived. The bifurcation curves divide the parameter plane into several regions; moreover, the complete bifurcation diagrams and phase portraits in different regions are obtained. Finally, our conclusions are applied to analyzing the stability and bifurcations of a practical example of a high angle-of-attack flight as well as the effects of elevator deflection on the asymptotic stability regions of equilibrium. The model and analytical methods presented in this paper can be used to study the nonlinear flight dynamic of longitudinal stall at high angle of attack.     

基于旋转阀的脉冲爆震火箭发动机实验

针对现有条件下电磁阀高频与大流量不可兼得的矛盾,设计了一种凸轮式旋转阀,以此来控制脉冲爆震火箭发动机氧化剂、燃料和隔离气体的间歇式供给.基于该旋转阀,以汽油和富氧空气为推进剂,进行了不同频率下的实验.实验结果表明,推进剂和隔离气供给压力与点火相位直接影响到能否稳定起爆.随着频率的增加,在1～ 10 Hz范围内,降低隔离氮气压力、调整点火相位可实现发动机的稳定工作;10Hz以上时,仅需要提高油气的供给压力.基于该旋转阀控制技术,脉冲爆震火箭发动机实现了工作频率30 Hz的稳定工作.     

SiO2 气凝胶热参数测试及评价

利用非稳态阶跃平面热源法对SiO2气凝胶的热参数进行了高温实验研究,获得了不同温度和压力条件下SiO2气凝胶的热导率、热扩散率以及比热容等.结果表明,SiO2气凝胶800℃的热导率比室温增大约62％.在相同气压且低于600℃时,其热导率受比热容影响,而在高于600℃时,则受热扩散率影响;在相同温度且高于10 kPa时,热导率亦受热扩散率影响.