SIMULATION OF COMPOSITE NON-LINEAR MECHANICAL BEHAVIOR OF CMCS BY FEM-BASED MULTI- SCALE APPROACH

The non-linear behavior of continuous fiber reinforced C/SiC ceramic matrix composites （CMCs） under tensile loading is modeled by three-dimensional representative volume element （RVE） models of the composite. The theoretical background of the multi-scale approach solved by the finite element method （FEM） is recalled first- ly. Then the geometric characters of three kinds of damage mechanisms, i.e. micro matrix cracks, fiber/matrix interface debonding and fiber fracture, are studied. Three kinds of RVE are proposed to model the microstructure of C/SiC with above damage mechanisms respectively. The matrix cracking is modeled by critical matrix strain en- ergy （CMSE） principle while a maximum shear stress criterion is used for modeling fiber/matrix interface debond- ing. The behavior of fiber fracture is modeled by the famous Weibull statistic theory. A numerical example of con- tinuous fiber reinforced C/SiC composite under tensile loading is performed. The results show that the stress/ strain curve predicted by the developed model agrees with experimental data.     

航空发动机燃烧室声载荷时域最佳控制的计算机仿真

根据航空发动机环形燃烧室测试数据 ,采用时间序列自回归分析方法建立了燃烧室噪声声压时间信号仿真模型ARMA(6 ,5 ) ,并利用Green函数对仿真误差进行了控制 ,使控制后的系统误差方差明显降低。     

沿曲面交线多坐标数控加工的算法研究

分析了曲面交线加工中刀具的偏置类型,提出了新的交线加工刀位轨迹生成算法。该算法利用曲面跟踪求交算法计算两曲面交线,并根据交线处曲面局部微分几何性质推算刀具的初始位置,然后采用牛顿迭代算法精确刀位。该算法的优点是能够精确控制刀具与曲面的加工误差,可处理单支点、双支点偏置情况下球头刀、平底刀、圆角刀的交线域加工,算法稳定、统一。     

中国民航使用国际航空货物运输规则盲区分析

指出了中国民航在适用国际航空货物运输规则时的盲区，分析了产生原因和对民航收入的不利影响，最后提出了相应对策。     

惯性式低频振动传感器畸变波形恢复问题初探

水电机组振动是表征水电机组运行稳定性的主要指标之一。然而，水电机组转频太低，适合于使用测量低频振动信号的惯性式低频振动传感器。由于传感器本身频率特性，造成其输出波形的低频段必然产生较大的畸变。为了获得实测低频振动信号的真实波形，对振动传感器输出的畸变波形恢复问题进行了初步探讨。     

民航飞行员飞行错觉的应对

飞行员的飞行错觉一直是威胁飞行安全的一大隐患,历来是航空医学、航空心理学等领域的研究热点,但其在民航飞行中没有受到足够重视。本文通过查阅近40年来发生的由飞行错觉引起的严重民航飞行事故,结合其他学者的研究结果,提出飞行错觉应在民航飞行中受到更大程度的重视;基于近20年来国内外有关飞行错觉产生机制和训练方法与效果的研究成果,给出了以下应对飞行错觉的建议:从多层面检查前庭;筛选飞行员时增加场独立和视觉空间认知能力的测量;改变飞行仪表显示方式;飞行错觉恢复训练的模拟机程序(针对视性错觉的除外)应使用动态的背景。     

STAP with medium PRF mode for non-side-looking airborne radar

Space-time adaptive processing (STAP) has been widely discussed for airborne radar systems to improve the system performance of detecting targets. This is especially true for airborne early warning (AEW) radar, which should find long-range and small radar cross section (RCS) targets such as the stealth aircraft and missiles. However, in existing airborne radar literature, STAP is mainly considered for clutter and jamming rejection in side-looking airborne radar (SLAR) applications. There have been fewer discussions on airborne radar with non-side-ways looking array radar (non-SLAR). The STAP of non-SLAR such as forward looking array radar is also very important and can not be avoided for airborne radar to detect targets in all directions. The STAP of the non-SLAR is studied here. A scheme has been proposed, which is processed by the way of STAP combined with multiple staggered medium pulse repetition frequencies (PRFs). We further study the selection of PRFs in order to make the scheme more available for non-SLAR radar. We analyze two typical non-SLAR cases, i.e., inclined-sideways looking array and forward looking array. We examine this scheme by comparing the performances of three processing systems under the criteria of range-velocity blind zone minimization. Computer simulation results show the multiple-PRFs STAP scheme is feasible for non-SLAR and can be applied to phased-array AEW radar systems     

驾驶员诱发振荡的抑制方法

对电传操纵系统驾驶员诱发振荡（ＰＩＯ）的现象进行了分析,指出了舵回路速率饱和是造成ＰＩＯ的主要原因,并有针对对给出了一种非常规的用于解决饱和非线性问题的程序控制方法。这种方法主要是通过舵回路反馈的状态信息来改变驾驶杆输入信号的放大系数,从而达到有效抑制ＰＩＯ的目的,同时用Ｈｕｒｗｉｔｚ稳定判据进行了机理分析,最后给出了仿真验证结果,证明该方法是简单而有效的。     

NiCoP合金包覆空心微珠粉体的制备

采用粉体化学镀技术，以AgNO3取代常见的贵金属盐PdCl2作为活化剂，H2PO2^-取代Sn^2 作为还原剂，在空心微珠表面包覆NiCoP合金。利用扫描电镜、能谱分析仪分析包覆层的形貌和成分。结果表明NiCoP合金均匀包覆在空心微珠表面。并提出了这种改进工艺的一种可能的机理。     

采用机头边条改善飞机大迎角横侧气动特性的风洞试验研究

飞机大迎角横侧气动特性是决定其机动性及敏捷性的主要因素之一。本文就采用机头边条改善飞机大迎角横侧气动特性进行了讨论。着重对机头边条的大小、安装位置等对飞机稳定性的影响进行讨论。试验是在气动中心低速所４ｍ×３ｍ和３．２ｍ风洞中进行的。