Remote-controlled flexible pose measurement system and method for a moving target in wind tunnel

The measurement of position and attitude parameters for the isolated target from a high-speed aircraft is a great challenge in the field of wind tunnel simulation technology. This paper proposes a remote-controlled flexible pose measurement system in wind tunnel conditions for the separation of a target from an aircraft. The position and attitude parameters of a moving object are obtained by utilizing a single camera with a focal length and camera orientation that can be changed based on different measurement conditions. Using this proposed system and method, both the flexibility and efficiency of the pose measurement system can be enhanced in wind tunnel conditions to meet the measurement requirements of different objects and experiments, which is also useful for the development of an intelligent position and attitude measurement system. The position and the focal length of the camera also can be controlled remotely during measurements to enlarge both the vertical and horizontal measurement range of this system. Experiments are conducted in the laboratory to measure the position and attitude of moving objects with high flexibility and efficiency, and the measurement precision of the measurement system is also verified through experiments.     

电动式磁悬浮动量球电磁场耦合分析

本文针对电动式磁悬浮动量球(Electrodynamic suspension reaction sphere, EDSRS)的电磁场耦合进行分析，采用定子绕组的感应电动势评判耦合强度，提出了耦合强度评判指标，作为EDSRS的结构设计约束，以降低电磁场耦合的影响。首先，结合EDSRS的具体结构特点，对多定子之间的电磁场耦合问题进行分析，采用定子电磁场在另一个定子绕组中产生的感应电动势评判耦合强度。然后，对感应电动势产生规律进行分析，提出了耦合强度评判指标，并基于所提评判指标，建立了耦合约束验证流程，作为EDSRS的结构设计约束，最后，通过有限元仿真和实验验证了上述电磁场耦合分析。     

云制造环境下机床装备资源选择方法

针对云制造环境下机床装备资源具有数量大、异质异构、服务制约因素多等问题，提出了基于多准则决策的机床装备资源选择方法。首先，利用本体论对机床装备资源建模，将物理资源虚拟化封装，实现虚拟资源与物理资源的逻辑映射。进一步地，使用语言变量量化决策者评估信息，采用模糊决策与试验评价实验室（FDEMATEL）和熵值法（EW）相结合的组合赋权法，引入模糊VIKOR（FVIKOR）多属性决策方法对机床装备资源进行综合评估，建立FDEMATEL-EW-FVIKOR的多准则混合决策模型。最后，将该方法应用于某生产制造企业，实验对比决策结果验证了多准则混合决策模型的可行性和有效性。     

Application of Wuhan Ionospheric Oblique Backscattering Sounding System (WIOBSS) for the investigation of midlatitude ionospheric irregularities

An upgrade of Wuhan Ionospheric Backscattering Sounding System (WIOBSS) was developed in 2015. Based on the Universal Serial Bus (USB), and a high performance FPGA, the newly designed WIOBSS has a completely digital structure, which makes it portable and flexible. Two identical WIOBSSs, which were situated at Mile (24.31°N, 103.39°E) and Puer (22.74°N, 101.05°E) respectively, were used to investigate the ionospheric irregularities. The comparisons of group distance, Doppler shift and width between Mile-Puer and Puer-Mile VHF ionospheric propagation paths indicate that the reciprocity of the irregularities is satisfied at midlatitude region. The WIOBSS is robust in the detection of ionospheric irregularities.     

Computational Research of the Main Rotor Hover and Vertical Descent States Based on the Nonlinear Blade Vortex Model

The research is conducted of aerodynamic performance of the Mi-8 helicopter main rotor in the hover state and the vertical descent state, including vortex ring states (VRSs). Total and distributed aerodynamic performance, wake patterns, and main rotor flow patterns are calculated. The findings and results were compared with those provided by other researchers.     

A method of estimating GPS instrumental biases with a convolution algorithm

This paper presents a method of deriving the instrumental differential code biases (DCBs) of GPS satellites and dual frequency receivers. Considering that the total electron content (TEC) varies smoothly over a small area, one ionospheric pierce point (IPP) and four more nearby IPPs were selected to build an equation with a convolution algorithm. In addition, unknown DCB parameters were arranged into a set of equations with GPS observations in a day unit by assuming that DCBs do not vary within a day. Then, the DCBs of satellites and receivers were determined by solving the equation set with the least-squares fitting technique. The performance of this method is examined by applying it to 361?days in 2014 using the observation data from 1311 GPS Earth Observation Network (GEONET) receivers. The result was crosswise-compared with the DCB estimated by the mesh method and the IONEX products from the Center for Orbit Determination in Europe (CODE). The DCB values derived by this method agree with those of the mesh method and the CODE products, with biases of 0.091?ns and 0.321?ns, respectively. The convolution method's accuracy and stability were quite good and showed improvements over the mesh method.