总经理致辞

亲爱的旅客朋友:您好!我谨代表中国国际航空股份有限公司全体员工,欢迎您乘坐国航的航班,并向您致以诚挚的问候!作为中国唯一载国旗飞行的航空公司,国航为旅客的安全出行、方便出行、幸福出行孜孜以求,您信赖国航,选择国航出行,对我们是很大的鼓舞和鞭策。您和广大旅客见证了国航的发展壮大。在世界民航大重组、大融汇的激烈市场竞争中,国航已连续六年荣列     

ACTIVE VIBRATION CONTROL OF TWO-BEAM STRUCTURES

The wave propagation approach is presented to research the active vibration control of two-beam structures.Considering the continuity of the generalized displacement and the equilibrium of the generalized force at the discontinuity,the wave reflection and transmission coefficients are calculated.Wave control is applied somewhere upstream or downstream to two-beam structures.Vibrations of two coupled beams per unit disturbance are investigated.The results show that wave control is efficient,and the influence of the thickness ratio of two-beam structures on control location is discussed.     

WAKE GEOMETRY CALCULATIONS FOR TILT-ROTOR USING VISCOUS VORTEX METHOD

A tilt-rotor unsteady flow analytical method has been developed based upon viscous vortex-particle meth- od. In this method, the vorticity field is divided into small assembled vortex particles. Vortex motion and diffusion are obtained by solving the velocity-vorticity-formed incompressible Navier-Stokes equations using a grid-free La- grangian simulation method. Generation of the newly vortex particles is calculated by using the Weissinger-L lifting surface model. Furthermore, in order to significantly improve computational efficiency, a fast multiple method （FMM） is introduced into the calculation of induced velocity and its gradient. Finally, the joint vertical experimen- tal （JVX） tilt-rotor is taken as numerical examples to analyze. The wake geometry and downwash are investigated for both hover and airplane modes. The proposed method for tilt-rotor flow analysis is verified by comparing its re- sults with those available measured data. Comparison indicates that the current method can accurately capture the complicated tilt-rotor wake variation and be suitable for aerodynamic interaction simulation in complex environ- ments. Additionally, the aerodynamic interactional characteristics of dual-rotor wake are discussed in different ro- tor distance. Results show that there are significant differences on interactional characteristics between hover mode and airplane mode.     

SIMULATION OF COMPOSITE NON-LINEAR MECHANICAL BEHAVIOR OF CMCS BY FEM-BASED MULTI- SCALE APPROACH

The non-linear behavior of continuous fiber reinforced C/SiC ceramic matrix composites （CMCs） under tensile loading is modeled by three-dimensional representative volume element （RVE） models of the composite. The theoretical background of the multi-scale approach solved by the finite element method （FEM） is recalled first- ly. Then the geometric characters of three kinds of damage mechanisms, i.e. micro matrix cracks, fiber/matrix interface debonding and fiber fracture, are studied. Three kinds of RVE are proposed to model the microstructure of C/SiC with above damage mechanisms respectively. The matrix cracking is modeled by critical matrix strain en- ergy （CMSE） principle while a maximum shear stress criterion is used for modeling fiber/matrix interface debond- ing. The behavior of fiber fracture is modeled by the famous Weibull statistic theory. A numerical example of con- tinuous fiber reinforced C/SiC composite under tensile loading is performed. The results show that the stress/ strain curve predicted by the developed model agrees with experimental data.     

70kN载荷应变天平校准系统研制进展

研制了70kN量级的应变天平校准系统,以满足2m量级高速风洞测力试验天平的静态校准需求。70kN载荷应变天平校准系统基于传统的单元校准方法,采用四自由度复位式体轴系自动校准方案,加载力源为标准砝码,采用砝码独立控制技术的自动加载装置实现天平校准载荷的自动加载。砝码产生的重力通过双十字铰链施力定位装置和刚性加载头准确地传递到天平上,无间隙复位传动机构可以保证天平的精确复位。建成后的校准系统可满足20～70kN量程范围的杆式天平和环式天平等不同类型天平的校准需求。     

圆柱尾流中眼镜蛇探针与热线的性能对比

在雷诺数为7200的圆柱尾流中对眼镜蛇探针与热线的测量结果进行了详细对比,主要包括:时均速度、雷诺应力、概率密度函数、自相关函数和能谱等。从对比结果可以发现眼镜蛇探针数据的拒绝率随湍流度增大而增大,但在本实验中其对时均测量结果无明显影响。尽管眼镜蛇探针数据有效率在95%以上,但相对于热线其明显高估了雷诺应力。尤其是主雷诺剪切应力u*v*,眼镜蛇探针与热线测量结果的差异要显著大于两者在雷诺正应力上的测量差异。由于无法反映高频随机脉动的影响,眼镜蛇探针所测信号自相关系数的周期性明显强于热线。眼镜蛇探针对速度u和v的响应存在区别,使得两者能谱在惯性子区内有显著差异,不能像热线一样反映出惯性子区内小尺度湍流的各向同性。     

航空高强度碳纤维单向层合结构复合材料在切削过程中的各向异性行为研究

单向层合结构的高强度碳纤维增强树脂基复合材料已逐渐发展成为航空承力结构件的主要材料,相关的切削加工需求也越来越多。由于显著的各向异性,单向层合结构的碳纤维复合材料易在切削加工中形成缺陷,难切削加工性明显。采用直角自由切削试验的方法,得到了T700航空高强度碳纤维单向层合结构复合材料在不同纤维方向角下的切削力、切削比能、切削温度、切削加工表面。基于试验结果讨论了碳纤维单向层合材料在切削过程中力热行为的各向异性,得到了不同切削参数条件下的切削比能图谱以及碳纤维复合材料的切削热源和传导模型。通过扫描电子显微镜(Scanning electron microscope,SEM)分析了典型切削加工表面的特征,得到了不同纤维方向下的表面形成规律。     

展向离散抽吸法控制边界层转捩实验研究

通过实验成功发展了一种生成大振幅稳定条带的有效方法,即展向离散抽吸方法。在此基础上,开展条带控制边界层转捩的研究。实验在水洞中进行,以零压力梯度平板边界层为研究对象,利用氢气泡时间线法观测引入条带前后人工激发转捩边界层中扰动发展变化,分析条带对转捩的控制效果及参数影响。结果表明,展向离散抽吸方法生成的稳定条带最大振幅可达28.4%U(U 为自由流速度);实验中引入的宽度14和28mm 的稳定条带都能起到抑制转捩的作用;条带振幅越大、宽度越窄,抑制效果越明显。研究结果为探索降低水/空气中航行器摩阻的新技术提供有价值的参考。     

采用长细管法进行脉动压力转捩探测的实验研究

为了简便地使用测量模型表面脉动压力特征的方法探测边界层转捩位置,需要研究脉动压力传感器接在传统测压模型外的适用性,即通过长细管将模型表面的脉动压力信号传递到脉动压力传感器上的方式是否可得到转捩的特征信号。首先采用信号发生器驱动扬声器,在无风条件下,测量了长细管对不同频率声压信号的传递损失情况。证明了所采用的长细管系统具有合适的工作频带。然后在西北工业大学NF-3低速风洞二元实验段、实验风速为30m/s的条件下,对弦长为800mm、展长为1.6m的翼型模型沿弦向进行了脉动压力信号测量,并通过改进的数据处理技术判断了模型表面的转捩位置。研究结果表明,采用长细管系统进行脉动压力方法转捩探测具有一定应用价值,值得进一步深入研究。     

基于着色Petri网的维修作业建模与人机工效分析

基于着色Petri网和CPN Tools平台,研究了维修作业过程的建模方法,提出了维修作业过程建模方法与步骤,采用模特法计算每一步操作所需时间值,采用人体动作代谢能耗预测模型计算每个操作的能耗值,实现了维修作业建模与仿真、作业序列的控制以及维修人员工作负荷和工作时间的定量计算。以A320飞机前起落架轮胎拆卸作业为例,采用CPN Tools软件进行了维修作业建模和仿真模拟,验证了模型和方法的可行性与有效性。该方法引入了传统维修作业模型中没有涉及的人机工效因素,能够有效评价维修人员的作业舒适性。