Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

一种用于主动流动控制的气泡型微致动器

 面向先进主动流动控制,在国内率先研发了一种基于微机电系统(MEMS)的气泡型微致动器阵列技术。分析了气泡型微致动器用于主动流动控制的原理,阐述了致动器结构及其加工工艺。通过对气泡样件的压力载荷 变形行为的测试,表明其具有较好的线性和较大承载能力。结合不同翼型的风洞试验表明,微致动器作动可以影响翼型表面的压强分布,从而可用于增升等控制目的。     

Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

某型飞机平尾管梁轴承轴向间隙问题的分析

分析某型飞机平尾管梁安装轴承轴向间隙产生的原因及轴承间隙加大对飞机使用的影响,并提出了排故和设计改进措施。     

产品研制和批产阶段可靠性问题分析

从产品研制和批产阶段暴露的与可靠性相关的故障入手,对目前产品在这两个阶段存在的一些问题进行了分析,并根据分析结果提出解决方法和改进建议.     

基于数据包络分析的民航发动机维修效果评价

对民航发动机维修效果进行评价可以为发动机承修厂的选择提供决策支持,同时有助于发现发动机承修厂的潜在问题。为了实现发动机维修效果的评价,首先提出了评价指标选择的原则,在此基础上给出了发动机维修效果评价指标体系,建立了基于数据包络分析的C2WH模型的发动机维修效果评价模型,并对模型的构建过程进行了描述。针对决策单元输入输出...     

幂等自映射的Nielsen数(4)

本文利用粘接等方法证明了一类拓朴空间上的幂等自映射的Ｎｉｅｌｓｅｎ数不超过１。     

新电位移边界条件下的压电介质断裂问题

应用边界元法,并结合一种特殊的复变函数基本解,研究了压电介质的断裂问题。由于该基本解完全遵循本构方程没有对电位移边界作假设,所以结论同非穿透性裂纹假设的结果有较大差异。通过计算表明,外加力载荷不但会引起裂纹尖端应力奇异性,也会引起电场奇异性,同样,外加电压也会引起裂纹尖端应力奇异性。     

APPLICATION OF HOT PRESS SINTERING TECHNIQUE TO EXPLOSIVE CHARGE LINER OF PETROLEUM PERFORATION BULLET

介绍了一种制备石油射孔弹的药形罩的新方法,采用粉末冶金技术,热压烧结工艺制备石油射孔弹的药形罩,并对药形罩的烧结工艺进行了研究。实验结果表明,采用该工艺制备的石油射孔弹药形罩可以满足要求。     

Coupled Stress-Electricity Model for Electromagnetic Emission Induced by Concrete Fracture

Electromagnetic emission induced during concrete fracturing is of great significance to health monitoring of concrete structures.A coupled stress-electricity model is established by analyzing the interaction between stress and electricity during concrete fracturing.And based on this model,the electromagnetic radiation parameters are calculated.The theoretical calculation is well coincident with experimental results.This work provides theoretical support for concrete testing system.