新电位移边界条件下的压电介质断裂问题

应用边界元法,并结合一种特殊的复变函数基本解,研究了压电介质的断裂问题。由于该基本解完全遵循本构方程没有对电位移边界作假设,所以结论同非穿透性裂纹假设的结果有较大差异。通过计算表明,外加力载荷不但会引起裂纹尖端应力奇异性,也会引起电场奇异性,同样,外加电压也会引起裂纹尖端应力奇异性。     

Very low frequency interferometry for the Chang’E-2 project

Very low frequency interferometry among two astronomical experiments has been proposed and accepted for further study for the second phase of China’s lunar exploration programme (the Chang’E Programme), which is envisaged to operate a lander and a rover on the surface of the moon. This experiment is an interferometer experiment in the very low frequency (VLF, f < 15 MHz) regime of radio frequencies with at least degree-level angular resolution. The goals include observing solar storm activities, Coronal Mass Ejections, Auroral Kilometric Radiation, and planetary radiation in the solar system, studying the origin of Cosmic Rays, spectral properties of pulsars, surveying ionized hydrogen in the Galaxy, and exploring coherent radio emissions.     

Coupled Stress-Electricity Model for Electromagnetic Emission Induced by Concrete Fracture

Electromagnetic emission induced during concrete fracturing is of great significance to health monitoring of concrete structures.A coupled stress-electricity model is established by analyzing the interaction between stress and electricity during concrete fracturing.And based on this model,the electromagnetic radiation parameters are calculated.The theoretical calculation is well coincident with experimental results.This work provides theoretical support for concrete testing system.     

Thermal-Fluid Coupling Simulation of Ventilation Cooling System of Generator Based on FLOWMASTER

By taking a 2.3 MW double-fed asynchronous generator as an example,a new method for fast simulation analysis of ventilation cooling system inside generator is proposed based on the one-dimensional simulation software FLOWMASTER.The thermal-fluid coupling simulation model of ventilation cooling system inside generator is established.Under the stable running state of the generator,the flow velocity distribution and temperature rise of the key parts of the generator are analyzed.The results prove that the ventilation structure design of the generator meets the temperature rise limit.The simulation results are compared with the theoretical calculation results and the experimental results,which verify the correctness of the thermal-fluid coupling simulation method proposed in this paper.     

电子设备的"三防"设计

本文针对电子设备的"三防"性能设计问题,从不同方面阐述实现电子设备的"三防"性能的方法和措施.     

基于遗传算法的无人机协同侦察航路规划

无人机将成为侦察卫星、有人驾驶侦察机的重要补充与增强手段 ,成为未来战场上广泛应用的一种侦察工具。为了提高无人机 (UAV)的侦察效率 ,在执行侦察任务前必需规划设计出高效的无人机侦察飞行航路。针对这一问题 ,本文提出了一种侦察效率指标评估的计算方法 ,解决了航路规划中的侦察效率量化问题。考虑在大范围任务区域内进行侦察航路优化存在计算的复杂性和收敛性等问题 ,本文采用遗传算法对侦察航路进行了优化处理。通过该方法得到的侦察航路可以有效地提高无人机的侦察效率。     

应用于小发柔性转子的高速动平衡技术

从某新型涡轴发动机动力涡轮转子的结构特点出发 ,简要说明了对该转子进行实际高速动平衡操作存在的困难及采取的对策。在试验过程中 ,创造性地应用影响系数法和自行设计加工的精密平衡卡箍 ,高质量地完成了细长柔性转子的高速动平衡试验。研究表明 :高速动平衡技术可大大减小细长柔性转子的动挠度和支承动反力 ,从而达到减小发动机振动的目的     

基于FPGA的BCH(31,21)码译码器的设计

本文介绍了采用FPGA设计BCH(31．21)码的译码器的方法．译码器能对BCH(31．21)码进行译码和纠正低于或等于2位的随机错误．并给出了在MAX PLUSⅡ软件平台下的仿真结果。     

F-12 纤维/RE14复合材料压力容器成型工艺研究

研究讨论了缠绕过程中几种主要工艺参数对F— 12纤维 /RE14配方Φ15 0mm压力容器复合材料性能的影响。结果表明 :采用“交替”铺层方式缠绕成型 ,含胶量控制在 30 %～ 4 0 % (质量分数 ) ,缠绕张力控制在 15 0N～ 2 0 0N ,采用GPC谱图控制固化时机 ,得到的复合材料综合性能较好 ;用优化出的工艺参数进行了Φ4 80mm压力容器试验 ,结果表明其容器特性系数PV/W值为 37.0 2km ,纤维强度转化率高达73.2 6 %。     

轴流压气机气动弹性失稳的实验研究

本文介绍了在跨音压气机试验台上对BF-1系列转子开展气动弹性失稳的实验研究工作。文中提出了实验模型的零阻尼设计原则,描述了失速颤振发生的过程。分析了失速颤振发作时的气动声学现象——一种特殊的啸声。此外还给出了两种叶尖间隙和两种叶型对失速颤振影响的实验结果。最后对经验预测方法和实验结果作了对比,符合情况较好。