某型导弹控制转换组合修理研究

控制转换组合是某型进口导弹上的重要分组件,担负整个导弹电力供应及信号转换功能.控制转换组合的修理存在开壳困难、无相关参考方法、内部电路不明确的问题.通过设计控制转换组合壳体分解工装,对控制转换组合进行分解,获得了完整的内部电路,通过对电路典型故障进行分析、修理,解决了控制转换组合的修理难题.     

A method of estimating GPS instrumental biases with a convolution algorithm

This paper presents a method of deriving the instrumental differential code biases (DCBs) of GPS satellites and dual frequency receivers. Considering that the total electron content (TEC) varies smoothly over a small area, one ionospheric pierce point (IPP) and four more nearby IPPs were selected to build an equation with a convolution algorithm. In addition, unknown DCB parameters were arranged into a set of equations with GPS observations in a day unit by assuming that DCBs do not vary within a day. Then, the DCBs of satellites and receivers were determined by solving the equation set with the least-squares fitting technique. The performance of this method is examined by applying it to 361?days in 2014 using the observation data from 1311 GPS Earth Observation Network (GEONET) receivers. The result was crosswise-compared with the DCB estimated by the mesh method and the IONEX products from the Center for Orbit Determination in Europe (CODE). The DCB values derived by this method agree with those of the mesh method and the CODE products, with biases of 0.091?ns and 0.321?ns, respectively. The convolution method's accuracy and stability were quite good and showed improvements over the mesh method.     

旋转固体火箭发动机内弹道理论与实验研究

本文系统地总结了我们在旋转固体火箭发动机内弹道理论与实验研究方面的某些成果，其中包括含铝丁羟推进剂的试片实验和装药发动机实验以及燃速敏感性预示和内弹道预示，得出了一些有益的结论，可供发动机设计及推进剂配方设计参考。     

基于自适应算法的带罩阵列天线方向图综合

提出一种基于自适应天线理论的带罩阵列天线方向图综合方法。先用射线追踪法计算到达罩内阵列天线的入射信号,通过自适应算法进行波束赋形,再用表面积分法得到带罩自适应天线的远区辐射场。用权函数的迭代来减小带罩方向图和无罩方向图的差别,实现天线与罩的一体优化。数值仿真结果表明,该方法能实现对带罩阵列天线主瓣指向、零陷位置和副瓣电平的控制,同时减小了天线罩对系统辐射特性方面的影响。     

2GHz～6GHz功率驱动模块研究

文章研究了工作频率为2GHz～6GHz的微波功率模块（MPM）中的功率驱动模块。分析了功率驱动模块的特性与基本分析方法,重点研究了驱动模块中均衡网络的分析与设计及功率放大器的偏置技术。针对微波功率模块中小型化行波管的离散特性,可以利用仿真软件的优化功能快速地对功率驱动模块进行辅助设计。基于此方法,设计了一个频率为2GHz～6GHz、最大输出功率达32．5dBm的功率驱动模块。     

弹载面源红外诱饵技术分析

针对反舰导弹突防面临红外成像末制导拦截导弹威胁,提出一种基于面源红外诱饵的弹载红外干扰技术,介绍弹载面源红外诱饵技术原理和特点,分析弹载面源红外诱饵设计关键技术及应用形式,对提高反舰导弹突防能力具有借鉴作用.     

TDICCD时序设计在FPGA中的工程实现

文章结合TDICCD和FPGA器件特点，主要从设计目标分析，VHDL算法描述、综合、布线、仿真、代码优化、代码测试验证等几方面，阐述了TDICCD时序设计的全过程；利用同步设计的思想避免了竞争与冒险；利用RC延迟模块实现了时序的精确调整；利用模块化思想提高了代码的可重用性、可测试性、可读性。最终，实现了一个6MHz像元输出速率下能正常工作的TDICCD的成像系统。     

混合电路故障诊断中的状态分割法

在故障字典法和离散事件系统(DES, Discrete Event System)离线诊断模型的基础上,提出一种对混合电路统一建模的方法:状态分割法.围绕系统状态和状态的划分之间的关系,以数学分析为主,提出交叉交运算的定义,证明了交叉交运算在划分集上的封闭性以及该运算是划分集上的划分积等性质.借用DES离线诊断模型的建模思想,提出系统的可诊断性定义,利用交叉交运算的性质证明了最小现象集存在并可达的结论.以故障现象分割系统状态集合的方式来定位系统所处的故障状态,把故障字典法和DES离线诊断模型统一起来,指出了状态分割法的通用性.      

强迫耗散非线性发展方程与完全平方守恒格式

从描述大气和海洋运动的强迫耗散非线性发展方程出发，对强迫耗散非线性大气和海洋方程组显式差分格式的计算稳定性进行了分析，构造了一类强迫耗散非线性发展方程的显式准安全平方守恒差分格式。理论分析和数值试验证明，这类显式准完全平方守恒差分格式是计算稳定的，值得推广应用。     

Aeroelastic two-level optimization for preliminary design of wing structures considering robust constraints

An aeroelastic two-level optimization methodology for preliminary design of wing struc- tures is presented, in which the parameters for structural layout and sizes are taken as design vari- ables in the first-level optimization, and robust constraints in conjunction with conventional aeroelastic constraints are considered in the second-level optimization. A low-order panel method is used for aerodynamic analysis in the first-level optimization, and a high-order panel method is employed in the second-level optimization. It is concluded that the design of the abovementioned structural parameters of a wing can be improved using the present method with high efficiency. An improvement is seen in aeroelastic performance of the wing obtained with the present method when compared to the initial wing. Since these optimized structures are obtained after consideration of aerodynamic and structural uncertainties, they are well suited to encounter these uncertainties when they occur in reality.