起落架结构参数对飞机机轮摆振频率特性的影响

研究了四个起落架结构参数：稳定距、机轮转动惯量、支柱侧倾刚度和减摆器传动系统扭转刚度对飞机机轮摆振频率特性的影响。对“轮胎型”摆振和“结构型”摆振进行了严格区分并分别予以研究,针对所计算的型号飞机,归纳总结出发生“轮胎型”摆振和“结构型”摆振的频率范围。所得结论为新机防摆设计和现役飞机防摆维护提供了理论依据。     

某型Hall磁敏元件的可靠性分析

某型磁敏元件寿命试验样本量很大,很难应用可靠性试验用表与Weibull分布基于最佳线性不变估计（BLIE）,最佳线性无偏估计（BLUE）枢轴量的数表,本文基于Bayes方法、Blom近似等,对产品进行了拟合优度检验、分布鉴别与可靠性评定。     

位相物体的三维非对称温度场的重建

采用卷积背抽影公式实现了位相物体的三维非对称温度场的重建,为光线偏／折测量三维非对称温度场提供了高精度分析和处理实验数据的方法。     

松约束运输问题模型与算法研究

运输问题存在着所谓的"多反而少"悖论现象,本文用运输问题的松约束模型,说明了运输问题产生悖论现象的原因,从而拓宽了运输问题的应用范围,增加了运输问题的适应性,本文给出的运输问题的松约束模型的表上作业算法,运算简单,能彻底解决了运输问题的"多反而少"悖论现象,用本文所介绍的算法解一些问题,得到了更省的调运方案.     

一个非常规前体机身的流动显示研究

描述了有类似Ｅｒｉｃｋｓｏｎ前体的非常规机身的初步流动显示研究结果,包括测力、表面油流和激光片光流动显示结果和用层流Ｎ－Ｓ方程进行数值模拟的结果。计算和试验的参数范围：α＝０°～５０°,β＝０°～２０°,虽然计算与试验所用的外形在后部有一些不同,但是两者在涡的位置方面显示了良好的一致性。同时研究也表明,大攻角的流动特性可以通过改变机身前体形状进行控制。通过研究还表明,这类前体在改善大攻角横侧方向安定性方面具有很大的潜力。     

国外在轨制造和装配技术发展现状及启示

在轨制造和装配技术是一项改变航天器研制模式的颠覆性技术.为全面了解国外关于在轨制造和装配技术的发展现状以及研制过程中所面临的挑战等,本文重点调研了欧美航天强国关于在轨制造和装配领域的发展情况,通过对国外目前在轨制造和装配领域科研项目的梳理为突破口,按照应用前景和技术特点将其分为三类:在轨制造、在轨装配和在轨构建;然后,...     

The Juno Waves Investigation

Jupiter is the source of the strongest planetary radio emissions in the solar system. Variations in these emissions are symptomatic of the dynamics of Jupiter’s magnetosphere and some have been directly associated with Jupiter’s auroras. The strongest radio emissions are associated with Io’s interaction with Jupiter’s magnetic field. In addition, plasma waves are thought to play important roles in the acceleration of energetic particles in the magnetosphere, some of which impact Jupiter’s upper atmosphere generating the auroras. Since the exploration of Jupiter’s polar magnetosphere is a major objective of the Juno mission, it is appropriate that a radio and plasma wave investigation is included in Juno’s payload. This paper describes the Waves instrument and the science it is to pursue as part of the Juno mission.     

计算机网络标准综述

简介制定计算机网络标准的国际标准化组织的情况,综合分析ISO/IEC和TCP/IP协议族等国际标准的主要组成及其应用情况.     

Buckling of composite panels: A criterion for optimum stiffener design

In this paper a linear, closed-form analysis of the buckling behavior of an orthotropic plate with elastic clamping and edge reinforcement under uniform compressive load is presented. This is a typical structural situation found in aerospace engineering for instance as stiffeners in wings or the fuselage. All governing equations are transformed in a dimensionless system using common characteristic quantities to gain good analytical access. The buckling behavior is analyzed and generic buckling diagrams are presented. The solutions show excellent agreement with results from literature and numerical analyses.The minimum bending stiffness of the edge reinforcement needed to withstand buckling is examined and a minimum stiffness criterion is presented. Furthermore an absolute minimum bending stiffness is found which is sufficient to enable the reinforcement to act as a near-rigid support for arbitrarily long plates. These criteria are of interest for optimized lightweight design of stringers and stiffeners.     

某型教练机起落架信号电路改进设计

针对某型教练机存外场使用时出现起落架未放到位，而飞行员却没能及时发现的问题，本文对飞机起落架信号电路进行了分析，并提出了相应的改进措施。