A wavelet multiresolution analysis for spatio-temporal signals

The wavelet filters of the conventional 3D multiresolution analysis possess homogeneous spatial and temporal frequency characteristics which limits one's ability to match filter frequency characteristics to signal frequency behavior. Also, the conventional 3D multiresolution analysis employs an oct-tree decomposition structure which restricts the analysis of signal details to identical resolutions in space and time. This paper presents a 3D wavelet multiresolution analysis constructed from nonhomogeneous spatial and temporal filters, and an orthogonal sub-band coding scheme that decouples the spatial and temporal decomposition processes     

Real-time translational control of a MEMS comb resonator

Closed-loop control has been successfully applied to a microelectromechanical systems (MEMS) lateral comb resonator device in real-time to perform impulse disturbance damping and sinusoidal position control, enabled by the use of a through-wafer optical microprobe to obtain position feedback. This result leverages the application of lifetime, in-situ control of MEMS in order to provide quality assurance of microsystems in safety critical applications. A position feedback signal produced by a through-wafer optical microprobe has been used for comb resonator system model identification by two independent methods to accurately determine the effective mass, damping, and spring constant values of the device. After accurate determination of system parameters, closed-loop impulse disturbance damping and proportional-integral-differential (PID) translational control were applied. Closed-loop control results presented indicate controllability of such microstructures and response times on the order of the natural frequency of the device.     

TerraSAR-X active radar ground calibrator system

In April 2006, the TerraSAR-X satellite was launched. This paper describes the development of a novel and highly integrated, digitally-controlled active SAR system calibrator (DARC). It consists of both an active transponder path for absolute radiometric calibration and a calibrated receiver chain for antenna pattern evaluation of the satellite antenna. A total of 16 active transponder and receiver systems and 17 receiver-only systems will be fabricated for a calibration campaign in 2006.     

Synthetic-aperture radar processing using fast factorized back-projection

Exact synthetic aperture radar (SAR) inversion for a linear aperture may be obtained using fast transform techniques. Alternatively, back-projection integration in time domain can also be used. This technique has the benefit of handling a general aperture geometry. In the past, however, back-projection has seldom been used due to heavy computational burden. We show that the back-projection integral can be recursively partitioned and an effective algorithm constructed based on aperture factorization. By representing images in local polar coordinates it is shown that the number of operations is drastically reduced and can be made to approach that of fast transform algorithms. The algorithm is applied to data from the airborne ultra-wideband CARABAS SAR and shown to give a reduction in processing time of two to three orders of magnitude.     

Airborne radar: its beginnings in World War II

Although not realized at the time, the defeat of the German Air Force in the summer of 1940 was one of the crucial battles of World War II. The narrow margin of victory can be ascribed to Britain's air-warning radar, Chain Home (CH), consisting of the 15-meter CH and the 1.5-meter CHL. The skillful use of this equipment by the Royal Air Force made daylight bombing unsustainable; the Luftwaffe then turned to night attacks, generally called "The Blitz." These were not effective in destroying military and industrial targets and depended on the hope of reducing the population's will to fight. Chain Home was of little use except to observe the attackers arrival, as it had almost no ability to follow the attackers as they proceeded inland. This eventuality was reckoned with before the outbreak of hostilities and had called for radars mounted in night fighters capable of guiding the pilot close enough to the target for him to open fire visually. The electronic techniques used at 1.5-meters were adapted to planes capable of carrying the radar and its operator. But there were three important design constraints: 1) the antennas had to be restricted to sizes that were practical for installation on aircraft, which for meter waves gave them low gain and large side lobes; 2) the set's maximum range was limited by the fighter's altitude as a result of the huge ground returns from the side lobes. British antiaircraft artillery, the stepchild of their arms, was too ineffective to drive the bombers to extreme altitudes; and 3) a minimum range had to be held until the flier could see his target, which strained the pulse techniques of the time.     

Automotive-grade MEMS sensors used for general aviation

The attitude heading reference system (AHRS) provides data for primary flight instruments, head-up displays, autopilots, and moving map navigation systems. Advances in solid-state MEMS rate sensors, coupled with Kalman filter algorithms designed to mitigate high drift rates, provide the basis for low-cost, high-performance AHRS for general aviation. This paper describes the performance of a low cost, miniaturized AHRS using automotive-grade MEMS sensors. The performance of the system is detailed. The implications for certification of this class of system and fault tolerance are discussed.     

Microdosimetric measurements of heavy ion tracks.

The biological effectiveness of radiations depends on the spatial pattern of ionizations and excitations produced by the charged particle tracks involved. Ionizations produced by both the primary ion and by energetic delta rays may contribute to the production of biologically relevant damage and to the concentration of damage which may effect the probability of repair. Although average energy concentration (dose) can be calculated using homogeneous track models, the energy is actually concentrated in small volumes containing segments of the ion and delta ray tracks. These local concentrations are studied experimentally using low pressure proportional counters, and theoretically, using Monte Carlo methods. Small volumes near an ion track may be traversed by a delta ray. If they are, the energy deposited will be similar to that produced by a single electron track in a low-energy x-ray irradiation. The probability of a delta ray interaction occurring decreases with the square of the radial distance from the track. The average energy deposited is the product of this probability and the energy deposited in an interaction. Average energy deposited calculated from measured interaction probability is in good agreement with the results of homogeneous track models.     

罗-罗在A3XX发动机竞争中首战告捷

在Ａ３ＸＸ的发动机竞争中，英国罗－罗公司的遄达９００选用于新加坡航空公司订购的Ａ３ＸＸ     

Design for validation

An approach is outlined for the development of ultrareliable avionics for civil air transports using a design-for-validation philosophy that includes rigorous application of formal methods. The basic concept of the methodology is introduced, and the role of formal methods is explored. The impact of the design-for-validation philosophy on the system design process is then demonstrated by two simple examples. More details about the design-for-validation methodology are then given     

SETI education programs in Australia

This paper discusses and evaluates two innovative SETI education programs conducted at the University of Western Sydney, viz: the SETI Pathways Program and the Life in the Universe Curriculum Project.