A global HF telecommand system for long duration balloon flights

An HF telecommand system for the control of long duration balloon flights at any point on the globe is described. The system proposed consists of a network of low-power transmitters operating at the same carrier frequency. The choice of transmitter frequency, power and location are presented. Control of the transmitters may be performed remotely by means of the public switched telephone network; an assessment of the error-rate in the system as a whole is given.     

Evaluation of light emitting diode characteristics for a space-based plant irradiation source.

Light emitting diodes (LEDs) are a promising irradiation source for plant growth in space. Improved semiconductor technology has yielded LED devices fabricated with gallium aluminum arsenide (GaAlAs) chips which have a high efficiency for converting electrical energy to photosynthetically active radiation. Specific GaAlAs LEDs are available that emit radiation with a peak wavelength near the spectral peak of maximum quantum action for photosynthesis. The electrical conversion efficiency of installed systems (micromole s-1 of photosynthetic photons per watt) of high output LEDs can be within 10% of that for high pressure sodium lamps. Output of individual LEDs were found to vary by as much as 55% from the average of the lot. LED ratings, in mcd (luminous intensity per solid angle), were found to be proportional to total photon output only for devices with the same dispersion angle and spectral peak. Increasing current through the LED increased output but also increased temperature with a consequent decrease in electrical conversion efficiency. A photosynthetic photon flux as high as 900 micromoles m-2 s-1 has been produced on surfaces using arrays with LEDs mounted 7.6 mm apart, operating as a current of 50 mA device-1 and at an installed density of approximately 17,200 lamps m-2 of irradiated area. Advantages of LEDs over other electric light sources for use in space systems include long life, minimal mass and volume and being a solid state device.     

Potential defense applications of expert systems

The authors provide an overview of expert systems and how they may effect the development of future defense applications. Military uses of computers are outlined, and expert-systems fundamentals are described. Artificial research and development efforts by the military are examined, and potential military applications are discussed. Expert systems efforts at NASA, by the US Air Force, and for the Strategic Defence Initiative are considered     

ESA microgravity payloads for the 1990s

Analysis of flight opportunities of existing and new microgravity multi-user facilities on Eureca and Spacelab and design studies of new experimental facilities for Columbus are presently in progress.

The materials and fluid sciences research community is likely to be a major user of the permanently manned Space Station/Columbus elements such as the European Attached Pressurised Module (APM) and the Man-Tended Free Flyer (MTFF).

In metallurgy, crystal growth and bioengineering initial research will be performed in the manned laboratory, whereas later on the processing will be automated and executed on unmanned platforms.

At present ESA prepares - in close cooperation with the scientific community - the hardware development of microgravity experimental facilities/laboratories for all Columbus elements through design studies. Preliminary studies which have been carried out to date are the following : Crystallisation Laboratory, Fluid Sciences Laboratory, Containerless Processing Laboratory, Thermophysical Properties Measurement Facility, Metallurgy Laboratory.

In 1998 it is planned to deepen these studies covering laboratories for the APM and for the MTFF. Details on flight opportunities in the pre-Columbus period will also be provided.     

Telerobotics: problems and research needs

With major emphasis on simulation, a university laboratory telerobotics facility permits problems to be approached by groups of graduate students. Helmet-mounded displays provide realism; the slaving of the display to the human operator's viewpoint gives a sense of `telepresence' that may be useful for prolonged tasks. Using top-down 3-D model control of distant images allows distant images to be reduced to a few parameters to update the model used for display to the human operator in a preview model to circumvent, in part, the communication delay. Also, the model can be used as a format for supervisory control and permit short-term local autonomous operations. Image processing algorithms can be made simpler and faster without trying to construct sensible images from the bottom. Control studies of telerobots lead to preferential manual control modes and, in this university environment, to basic paradigms for human motion and thence, perhaps, to redesign of robotic control, trajectory path planning, and rehabilitation prosthetics. Speculation as to future industrial drives for this telerobotic field suggests efficient roles for government agencies such as NASA     

Non-linear resonant excitation of whistler mode waves in the Earth's ionosphere

We examine the resonant non-linear interaction in the Earth's ionosphere of two powerful high frequency radio beams with frequencies f ₁ and f ₂ (both larger than the plasma frequency at F2_max) and wave numbers k ₁ and k ₂ such that a whistler mode wave can be excited with a frequency f ₃ = f ₁ — f ₂ and a wave number k ₃ = k ₁ – k ₂. The feasibility of an effective ground based installation, sited at low latitudes, is discussed and the field strength of the wave emerging from a 10 km wide ionospheric region illuminated by the beams is evaluated for a range of transmitted frequencies, beam orientations and plasma frequencies in the interaction region. It is suggested that the longitude dependence of the enhancement of VLF noise bands detected by the Ariel 3 satellite may be due to a non-linear interaction of this type between any two or more medium wavelength signals from areas where there is a high concentration of commercial broadcasting stations, such as the NE region of the U.S.A.     

Determining rotation rates from light curves: RW Mon and RW Tau

We present light curve solutions for the non-synchronously rotating Algols RW Mon and RW Tau, and we illustrate how rotation rates are determined from light curves. We find RW Mon's primary component to spin at about 5 times the synchronous rate, which confirms the indication of fast rotation from reported emission line activity. RW Tau turns out to be only a mildly rapidly rotating Algol system, and our light curve solutions do not yield any firm value for the rotation rate of the primary component. It is suggested that continued efforts should be made to do good quality line broadening studies in order to find rotation rates for systems with only modest degrees of rapid rotation, and in order to further test photometric rotation rates against those of line broadening studies.     

International trends in Stirling engine technology development:ISEC 1982-8

A brief survey is presented of trends in work reported at four International Stirling Engine Conferences held during the 1980s. The discussion covers international participation, publication sources and types, engine types, specialized engines, sponsoring institutions and observed trends     

A noise insensitive solution to an ambiguity problem in spectralestimation

The instantaneous frequency measurement (IFM) receiver is capable of measuring the center frequency of single frequency pulses over a wide range (bandwidth) of center frequencies. Because of various constraints, the frequency resolution requirement results in long correlator delay times that reduce the single correlator bandwidth. A large bandwidth can be achieved only if two or more correlators are used. The problem of estimating frequency is then reduced to the simultaneous congruence problem of number theory. A design procedure is presented for solving the congruence problem for a given amount of noise protection, a stated frequency resolution, a minimum bandwidth, and a fixed level of precision (bits) in the IFM receiver