Continuous tracking of cmes using MICA, andLASCO C2 and C3 coronagraphs

In this work we have tracked coronal mass ejections observed with the ground based Mirror Coronagraph for Argentina (MICA) and the Large Angle and Spectroscopic Coronagraph (LASCO) C2 and C3 on board of the Solar and Heliospheric Observatory (SOHO). The MICA telescope is located at El Leoncito (31.8 S, 69.3 W), San Juan (Argentina), since 1997 as part of a bilateral scientific project between Germany and Argentina. SOHO is a project of international cooperation between ESA and NASA. Together these instruments are able to observe the solar corona ranging from 1.05 to 32 solar radii. MICA images the Fe XIV emission line corona and LASCO coronagraphs observe the Thomson scattered white light corona. We have selected events for which there are observations from the three coronagraphs. Using the composite data we were able to obtain height-time diagrams for the corresponding dynamical coronal features traveling outwards in order to determine some of their kinematical properties, i.e., plane of sky velocity and acceleration.     

地中式混凝土油罐的数值模拟

对正在开展的战略石油储备,提出用地中预应力混凝土罐进行石油储存.应用结构分析软件ANSYS对巨型混凝土单壁罐和双壁罐进行弹性分析,指出罐壁环向应力几乎全部由温度荷载造成,罐壁温度场和温度应力具有明显时间性,储油初期罐壁温差最大,96?h后罐壁顶部拉应力达到最大;设置中间保温层后,内罐应力减小,外罐应力增大,应对内、外罐连接支墩做特殊设计,以满足罐壁温度变形.     

离散事件动态系统的GSMP模型及扰动分析

对离散事件动态系统（ＤＥＤＳ）的仿真过程建立了包含中断事件集和驱动事件集的广义半马尔可夫过程（ＧＳＭＰ）模型，对参数的无穷小扰动所引起的系统状态转移时刻进行了扰动分析，最后，讨论了扰动分析所需要的可变换条件和样本性能函数的关系，并提出值得进一步研究的问题。     

惯性解耦的多体系统动力学方程

对一类含自由－自由弹性梁的多体系统动力学方程进行了研究，利用多体系统的结构特性和运动特性对其动力学方程进行了简化，使惯性质量矩阵为对角形，得到了惯性解耦的多体系统动力学方程，在方程的数值求解时，可提高计算速度和精度，为多体系统动力学的实时仿真提供方便。     

Comparing the improved Di Giovanni/Radicella model with sounding-based electron density profiles and with the IRI model

The Di Giovanni/Radicella model (DGR) /1/ determines a bottom side electron densty profile alone from the set of routinely scaled ionogram parameters foE, foF1, foF2 and M(3000)F2 and the total electron content; the smoothed sunspot number R12 appears in the calculation. Present designations are DGR2/2/ and DRR3 /3/ [see Appendix]; they are valid in the northern hemisphere. DGR is compared with electron density profiles derived from ionograms obtained at Juliusruh (54.6°N, 13.4°E), and with the (URSI-based) IRI90 at different conditiones. Experimental total electron content (TEC) data are compared to both models. At the considered station, the profiles obtained by both models are reasonably in agreement amongst themselves and with the experimental data.

The TEC derived from the DGR3 model is in good agreement with experimental TEC, whereas, at high solar activity, IRI90 gives too high TEC values, especially during daytime.     

Surface tension-driven flows in horizontal liquid metal layers

The problem of surface tension-driven flows in horizontal liquid layers has been studied experimentally, and theoretically by direct numerical simulation and small perturbation analysis. We focus our attention on situations in which the depth of the fluid (liquid tin; small Prandtl number, Pr=0.015) is small enough to ensure the predominance of the surface tension forces over those due to the buoyancy. The surface velocity has been experimentally obtained for liquid tin layer with various aspect ratio (length to height) in the range 5<A<83. The thermal gradients are ranged from 5 to 40°K/cm. In the numerical study, the Navier-Stokes and energy equations are solved by an efficient finite difference technique. The parameters governing the flow behaviour in the liquid are varied to determine their effects on thermocapillary convection: the Reynolds number 10<Re<210⁴ and the aspect ratio 2<A<25; with Pr kept constant at Pr=0.015. The linear eigenequation resulting from small spatial disturbances of the Couette flow solution is solved using an Tau-Chebyshev approximation. A notable feature of the theoretical study is the totally different end circulations. In the region near the cold wall a multicell structure is evident. This agrees with the eigensolution which is of complex type, indicating spatial periodicity. In the hot wall region the flow is accelerated to reach the velocity value for the fully-developed Couette flow which is reached under conditions such as Re/A<20. The transition from viscous to boundary layer regime occurs for a critical value (Re/A)_c of nearly about 200, as deduced from the numerical and experimental results.     

基于Patran/Nastran的结构优化系统的工程应用

采用基于有限元软件Patran/Nastran二次开发的结构优化系统,对两个卫星结构进行了以重量为目标、考虑基频和应力等约束的优化设计.系统由用户在Patran环境下完成问题建模,优化过程中调用Nastran作结构分析并结合二级多点逼近算法寻优.设计对象是由蜂窝夹层板、不同截面形状梁、板壳等组成的典型复杂航天器结构,设计过程中还利用人机交互技术,最终使重量明显降低,为工程部门改进设计提供了依据.算例结果之一与其他结构优化系统结果一致,进一步说明了所开发系统的正确性.     

A first step towards proton flux forecasting

We present a preliminary version of a potential tool for real time proton flux prediction which provides proton flux profiles and cumulative fluence profiles at 0.5 and 2 MeV of solar energetic particle events, from their onset up to the arrival of the interplanetary shock at the spacecraft position (located at 1 or 0.4 AU). Based on the proton transportation model by Lario et al. [Lario, D., Sanahuja, B., Heras, A.M. Energetic particle events: efficiency of interplanetary shocks as 50 keV E < 100 MeV proton accelerators. Astrophys. J. 509, 415–434, 1998] and the magnetohydrodynamic shock propagation model of Wu et al. [Wu, S.T., Dryer, M., Han, S.M. Non-planar MHD model for solar flare-generated disturbances in the Heliospheric equatorial plane. Sol. Phys. 84, 395–418, 1983], we have generated a database containing “synthetic” profiles of the proton fluxes and cumulative fluences of 384 solar energetic particle events. We are currently validating the applicability of this code for space weather forecasting by comparing the resulting “synthetic” flux profiles with those of several real events.     

利用高空科学气球收集宇宙尘粒

本文叙述了高空科学气球上一种自行研制的宇宙尘收集器以及气球吊篮系统。利用该系统进行了五次高空字宙尘粒的收集飞行,简述了对所收集的尘粒进行系统研究的结果。     

Changes in vacuolation in the root apex cells of soybean seedlings in microgravity.

Changes in the vacuolation in root apex cells of soybean (Glycine max L. [Merr.]) seedlings grown in microgravity were investigated. Spaceflight and ground control seedlings were grown in the absence or presence of KMnO4 (to remove ethylene) for 6 days. After landing, in order to study of cell ultrastructure and subcellular free calcium ion distribution, seedling root apices were fixed in 2.5% (w/v) glutaraldehyde in 0.1 M cacodylate buffer and 2% (w/v) glutaraldehyde, 2.5% (w/v) formaldehyde, 2% (w/v) potassium antimonate K[Sb(OH)6] in 0.1 M K2HPO4 buffer with an osmolarity (calculated theoretically) of 0.45 and 1.26 osmol. The concentrations of ethylene in all spaceflight canisters were significantly higher than in the ground control canisters. Seedling growth was reduced in the spaceflight-exposed plants. Additionally, the spaceflight-exposed plants exhibited progressive vacuolation in the root apex cells, particularly in the columella cells, to a greater degree than the ground controls. Plasmolysis was observed in columella cells of spaceflight roots fixed in solutions with relatively high osmolarity (1.26 osmol). The appearance of plasmolysis permitted the evaluation of the water status of cells. The water potential of the spaceflight cells was higher than the surrounding fixative solution. A decrease in osmotic potential and/or an increase in turgor potential may have induced increases in cell water potential. However, the plasmolysed (i.e. non-turgid) cells implied that increases in water potential were accompanied with a decrease in osmotic potential. In such cells changes in vacuolation may have been involved to maintain turgor pressure or may have been a result of intensification of other vacuolar functions like digestion and storage.