Closed cycle coolers for space applications

Single stage Stirling coolers providing refrigeration at around 80 K have been developed for space use and are now being produced commercially. Development work is now concentrating on multistage coolers for temperatures below 30 K. This paper describes results from a two stage cooler built at the Rutherford Appleton Laboratory and preliminary tests on a closed cycle 4 K cooler.     

Temporal decorrelation of X-band backscatter from wind-influencedvegetation

The temporal decorrelation characteristics of X-band radar backscatter from wind-influenced vegetation were investigated using a short-range CW radar. Radar reflectance data were gathered on various types of individual trees from a distance of approximately 30 m. The windspeed was monitored during each measurement, which lasted 5 s. The crown cover and the mean leaf area of the trees were also recorded. Autocovariance plots were generated for each measurement, from which the decorrelation time was estimated. As expected, the return signals decorrelated faster at higher wind speeds. However, the decorrelation time was also found to depend on the tree type, tree structure, and leaf cover characteristics. Measured decorrelation times for moderate winds (7-9 m/s) were often between 40-60 ms, although the lowest decorrelation time measured under these conditions was 14 ms for the Eastern Cottonwood. In lighter winds (1-4 m/s), decorrelation times were much longer, and there was substantial spread in the data     

Prebiotic oligodeoxynucleotide synthesis in a cyclic evaporating system at low temperatures.

Deoxynucleoside 5'-monophosphates were condensed by cyanamide or by l-ethyl-3-(3-dimethylaminopropyl) carbodiimide in the presence of ammonium chloride at 0 degree, 37 degrees or 60 degrees C through several cycles of evaporation to dryness with replenishment of all reactants at each cycle. We found that at 37 degrees or 60 degrees cyanamide gives distinctly more high molecular weight material than does carbodiimide. Indeed, the yield of condensed products for the cyanamide reaction (dimers and higher oligomers) was found to be between 60 percent and 80 percent. The molecular weight distribution of the product shifts to higher molecular weights as cycling continues at 37 degrees or 60 degrees for both condensing agents. The water soluble carbodiimide gives higher yields of low molecular weight product but much lower yields of the higher molecular weight products. At 0 degree yields of high molecular weight product were low for both condensing agents. Results of characterization of the products demonstrate the synthesis of oligodeoxynucleotides including tetramers, with 3'-5' phosphodiester linkages.     

Visual thematic mapping from Landsat and collateral data in support of mineral development

Over the past ten years, the authors and their associates have used Landsat images and collateral data to prepare visual thematic maps. The data are used in a projection-compositor (Procom) system that enlarges Landsat images and other data to scales as great as 1:15 000. Revisions of existing maps for simple themes (e.g. topographic maps) can be completed quickly, accurately and inexpensively. Complex themes, such as geological formations and structures, can be mapped through the optical merging of collateral data sets (e.g. Landsat, geophysics, geology) at a common scale. Such mapping has led to the recognition of a non-parallactic means of obtaining whole image stereo-models with large vertical exaggerations using Landsat images.     

AI techniques in uninhabited aerial vehicle flight

This describes the development of an application of artificial intelligence (AI) for unmanned aerial vehicle (UAV) control. The project was part of the requirements for a class in AI at NOVA Southeastern University and a beginning project at NASA Wallops Flight Facility for a resilient, robust, and intelligent UAV flight control system. A method is outlined which allows a base level application for applying an artificial intelligence method, fuzzy logic, to aspects of control logic for UAV flight. One element of UAV flight, automated altitude hold, has been implemented and preliminary results displayed.     

Advanced optical processors for multiple degree-of-freedom objectrecognition

Several optical pattern recognition techniques suitable for multiple-degree-of-freedom object recognition are described. These include a correlator, an associate processor, and three feature extractors using moments, chord distributions, and a space-variant feature space. The processing architectures, the algorithm details, and initial results obtained for each approach are presented     

A global HF telecommand system for long duration balloon flights

An HF telecommand system for the control of long duration balloon flights at any point on the globe is described. The system proposed consists of a network of low-power transmitters operating at the same carrier frequency. The choice of transmitter frequency, power and location are presented. Control of the transmitters may be performed remotely by means of the public switched telephone network; an assessment of the error-rate in the system as a whole is given.     

The mass and helium discrepancy in massive stars: The case Vela X-1

A NLTE-analysis is presented of high S/N spectra of the optical component of the standard massive X-ray binary Vela X-1. In combination with the orbital parameters we conclude that the optical star is highly helium enriched and is significantly overluminous compared to standard evolutionary tracks of massive accretion stars. We then propose a new accretion model able to explain these features.     

Evaluation of light emitting diode characteristics for a space-based plant irradiation source.

Light emitting diodes (LEDs) are a promising irradiation source for plant growth in space. Improved semiconductor technology has yielded LED devices fabricated with gallium aluminum arsenide (GaAlAs) chips which have a high efficiency for converting electrical energy to photosynthetically active radiation. Specific GaAlAs LEDs are available that emit radiation with a peak wavelength near the spectral peak of maximum quantum action for photosynthesis. The electrical conversion efficiency of installed systems (micromole s-1 of photosynthetic photons per watt) of high output LEDs can be within 10% of that for high pressure sodium lamps. Output of individual LEDs were found to vary by as much as 55% from the average of the lot. LED ratings, in mcd (luminous intensity per solid angle), were found to be proportional to total photon output only for devices with the same dispersion angle and spectral peak. Increasing current through the LED increased output but also increased temperature with a consequent decrease in electrical conversion efficiency. A photosynthetic photon flux as high as 900 micromoles m-2 s-1 has been produced on surfaces using arrays with LEDs mounted 7.6 mm apart, operating as a current of 50 mA device-1 and at an installed density of approximately 17,200 lamps m-2 of irradiated area. Advantages of LEDs over other electric light sources for use in space systems include long life, minimal mass and volume and being a solid state device.     

Computer analysis of the lineaments of Nepal

Various information has been obtained by computer analysis of the lineaments of Nepal. The data were carefully studied and correlated to establish the relationships of lineaments with geological units, structure, mineralization, etc. The lineament map of Nepal was prepared during 1977–1978; the lineament data were digitized in 1982—using a Hewlett Packard system 45 desktop computer—separated by area (east, central and west Nepal) and also according to geological units. By trial and error and using all variables, the different preferred orientation classes were identified for east, central and west Nepal. Lineaments were grouped according to length into less than 10 km, 10–20 km, 20–30 km and more than 30 km, for the entire country and also for major geological units, i.e., Siwalik (sub-Himalaya), Lesser Himalaya (midlands) and Higher Himalaya. Various rose diagrams and histograms showing frequency and lengths of lineaments were plotted for the different geological units and the different sectors. Lineaments associated with granites of major subdivisions were plotted separately and analysed.