弹道导弹自由段飞行中的守恒量及其应用

从精确弹道计算所用的数学模型出发，指出了弹性在自由段飞行中的两个具有明确物理意义的运动守恒量，并给出了用发射坐标系下的运动参数求这些守恒量的简洁计算公式。这两个守恒量可作为一种简单、实用的辅助评估手段用于计算结果可信性分析以及导弹发射诸元的校验。     

位标器陀螺转子的动平衡

阐述了具有阿基米德螺旋线图案的位标器的基本原理及其运动规律，并说明这种陀螺转子的振动与绕动的平衡原理与方法。     

Aerodynamic Design Method of Integrated Aircraft with Submerged Intake Devices and Power Plant Included into Airframe Carrying System

This paper presents a theoretically and practically grounded architecture of design methods combination. A possibility and completeness of developing integral design solutions and intensifying the design process are provided by redistribution of emphases of numerical and natural experiments.     

Influence of fuel hydrogen additives on the characteristics of a gas-piston engine under changes of an ignition advance angle

We present the results of experimental studies of the fuel hydrogen additive influence on the characteristics of a gas-piston engine converted for operation by natural gas under changes of an ignition advance angle (IAA). The results of investigations were used to determine the influence of the hydrogen additive on the effective engine efficiency and fuel consumption under IAA changes.     

强不规则天体引力场中的动力学研究进展

小行星探测与彗星探测是深空探测的重要方面。一般来说,小行星和彗星因质量都不足以使得万有引力克服应力达到流体静力学平衡,而具有强不规则的外形。研究强不规则天体引力场中的动力学行为及其内在机制,是探测器被不规则天体捕获并对其形成近距离探测轨道的基础。从引力场模型和动力学行为两个方面综述了强不规则天体引力场中动力学的研究进展,在引力场模型的研究方面介绍了强不规则天体引力场建模的球谐函数摄动展开模型、简单特殊体模型及多面体模型的研究现状,在动力学机制的研究方面介绍了强不规则天体引力场中的周期轨道和拟周期轨道、平衡点、流形、分岔与共振以及混沌运动的研究现状,指出了这些方面研究的重点与难点。分析了强不规则体引力场中动力学的研究趋势。     

高温空气传输特性对边界层稳定性及转捩预测的影响

为了研究黏度和导热系数对边界层内基本流和流动稳定性的影响,首先通过分析比较Sutherland公式和目前常用的Gupta等人的拟合关系式,建立了高温气体下黏度和导热系数的计算模型,并分别将Sutherland公式和新建立的计算模型应用于7组元化学平衡流的平板模型,在马赫数为10,16和20,飞行高度为30-5km等条件下分别对黏度和导热系数的模型进行比较.计算结果表明:在高温范围内,黏度和导热系数均影响着边界层的基本流、流动稳定性及转捩预测,且两者影响的趋势相反,黏度的增加、导热系数的减小都能使扰动的增长率变大,增长区变宽,转捩位置提前.      

Structure of a two-phase flow of boiling water at low-head adiabatic efflux through the laval nozzle

The critical flow conditions and structural forms of a two-phase flow that is formed during water efflux from the region of moderate and low pressures into a rarefied medium are analyzed. The difference in the structural forms of a flow realized at the low-head efflux from the structure of a flow occurring in the fluid flow with moderate and high initial pressures is established. The critical pressure differential characterizing the establishment of the maximum flowrate is determined and the decisive influence of turbulence on the vapor phase generation and flow conditions of a two-phase medium is shown.     

Scientific Planning and Commanding of the Rosetta Payload

ESA’s Rosetta mission was launched in March 2004 and is on its way to comet 67P/Churyumov-Gerasimenko, where it is scheduled to arrive in summer 2014. It comprises a payload of 12 scientific instruments and a Lander. All instruments are provided by Principal Investigators, which are responsible for their operations. As for most ESA science missions, the ground segment of the mission consists of a Mission Operations Centre (MOC) and a Science Operations Centre (SOC). While the MOC is responsible for all spacecraft-related aspects and the final uplink of all command timelines to the spacecraft, the scientific operations of the instruments and the collection of the data and ingestion into the Planetary Science Archive are coordinated by the SOC. This paper focuses on the tasks of the SOC and in particular on the methodology and constraints to convert the scientific goals of the Rosetta mission to operational timelines.     

Wave resistance of rough plane channel walls in the supersonic flow

We propose a method that makes it possible to obtain in the framework of linear approximation the exact formulas for the wave resistance of the channel walls with an arbitrary plane pattern in the first and subsequent interference zones. It is shown by a particular example of the sinusoidal pattern that the pressure wave interference may lead to the positive or negative resistance resonance.     

The finite element approximation of vector fields in curvilinear coordinates

We demonstrate that it is possible to express each component of the displacement vector for the interior point of the finite element (FE) through all components of nodal unknowns in curvilinear coordinates. The effectiveness of the valid technique of vector approximation for displacement fields has been verified on an example.