The method for predicting solar proton events

Dynamic processes in the interplanetary space have been investigated using time variations in time parameters of the cosmic-ray rigidity spectrum. Change of heliosphere electromagnetic characteristics has been found out to precede sporadic phenomena on the Sun. In particular, it is shown that sporadic phenomena are followed by generation of local polarization electric fields, decrease of the magnetic-field strength in small-scale heliospheric structures, and increase of the potential difference between the pole and the plane of the ecliptic. These features allow prediction of solar proton events in advance (from several hours to several tens of hours) with a high degree of confirmation.     

Study of the 28 October 2003 and 20 January 2005 solar flares by means of 2.223 MeV gamma-emission line

By the data on intensity-time profiles of the neutron capture line of 2.223 MeV we have studied some characteristics of two solar flares, 28 October 2003 and 20 January 2005 (INTEGRAL and CORONAS-F observations, respectively). The SINP code was applied making allowance for the main processes of neutron interactions and deceleration in the solar plasma, character of neutron source, losses of neutrons and density model of the solar atmosphere. Comparison of the computed time profiles of 2.223 MeV line with observed ones for the flare of 28 October 2003 confirms the results obtained earlier for three other flares. Namely, the effect of density enhancement (EDE) in the sub-flare region, as well as the variations (hardening) of accelerated particle spectrum in the course of the event have been confirmed. The usual modeling procedure by the SINP code, however, seems to be inapplicable to the event of 20 January 2005. Possible causes of density enhancements during some flares and peculiarities of the 20 January 2005 flare are discussed.     

The brief history of experimental research of cosmic ray variations in Yakutia

Some unknown historical facts of cosmic ray studies in the north-east of the former Soviet Union related to the Yakutsk scientific group are reported for the benefit of the international scientific community. It focuses on the founders of Yu.G. Shafer Institute of Cosmophysical Research and Aeronomy of Siberian Branch of Russian Academy of Sciences. A chronology of measurements of cosmic ray intensity variations since 1949 in Yakutia (Sakha Republic; NE Siberia) is given. In particular, for the first time the data of the first solar cosmic ray event registered at Yakutsk (GLE04), with a small ionization chamber S-2 (volume: 20 L) are presented. Moreover, the data of the large ionization chamber ASK-1 (volume: 950 L) for the 1953–2003 period useful for specialists in the field of cosmic ray variations are also shown.     

Biaxial Mode of Rotation of a Satellite in the Orbit Plane

A mode of motion of a satellite with respect to its center of mass is studied, which is called the biaxial rotation in the orbit plane. In this mode of rotation, an elongated and nearly dynamically symmetric satellite rotates around the longitudinal axis, which, in turn, rotates around the normal to the plane of an orbit; the angular velocity of rotation around the longitudinal axis is several times larger than the orbital angular velocity, deviations of this axis from the orbit plane are small. Such a rotation is convenient in the case when it is required to secure a sufficiently uniform illumination of the satellite's surface by the Sun at a comparatively small angular velocity of the satellite. The investigation consists of the numerical integration of equations of the satellite's motion, which take into account gravitational and restoring aerodynamic moments, as well as the evolution of the orbit. At high orbits, the mode of the biaxial rotation is conserved for an appreciable length of time, and at low orbits it is destroyed due to the impact of the aerodynamic moment. The orbit altitudes and the method of constructing the initial conditions of motion that guarantee a sufficiently prolonged period of existence of this mode are specified.     

Solar Activity and the Climate of Prebaikalia

This paper presents convincing evidence for the reality of manifestations of solar variability in climate characteristics of the Prebaikalia. A numerical estimate is obtained of this influence on ground air temperature. It is shown that the main meaningful variations in air temperature in the region for the period1881-1960 were caused by solar activity. Since the 1960s till the present, with the influence of solar variability continuing, a clear-cut influence of another factor has been observed, the role of which has been steadily increasing, and in the hst decade it has now exceeded the contribution of solar variability. Research results on the variations in hydrological characteristics of Lake Baikal and the Angara river and their connection with solar activity are presented. It is shown that these characteristics are closely correlated with the duration of solar cycles.     

Adaptation of neuromuscular activation patterns during treadmill walking after long-duration space flight

The precise neuromuscular control needed for optimal locomotion, particularly around heel strike and toe off, is known to he compromised after short duration (8- to 15-day) space flight. We hypothesized here that longer exposure to weightlessness would result in maladaptive neuromuscular activation during postflight treadmill walking. We also hypothesized that space flight would affect the ability of the sensory-motor control system to generate adaptive neuromuscular activation patterns in response to changes in visual target distance during postflight treadmill walking. Seven crewmembers, who completed 3- to 6-month missions, walked on a motorized treadmill while visually fixating on a target placed 30 cm (NEAR) or 2 m (FAR) from the subject's eyes. Electronic foot switch data and surface electromyography were collected from selected muscles of the right lower limb. Results indicate that the phasic features of neuromuscular activation were moderately affected and the relative amplitude of activity in the tibialis anterior and rectus femoris around toe off changed after space flight. Changes also were evident after space flight in how these muscles adapted to the shift in visual target distance.     

Evaporation and ignition of droplets in combustion chambers modeling and simulation

Computer simulation of liquid fuel jet injection into heated atmosphere of combustion chamber, mixture formation, ignition and combustion need adequate modeling of evaporation, which is extremely important for the curved surfaces in the presence of strong heat and mass diffusion fluxes. Combustion of most widely spread hydrocarbon fuels takes place in a gas-phase regime. Thus, evaporation of fuel from the surface of droplets turns to be one of the limiting factors of the process as well. The problems of fuel droplets atomization, evaporation being the key factors for heterogeneous reacting mixtures, the non-equilibrium effects in droplets atomization and phase transitions will be taken into account in describing thermal and mechanical interaction of droplets with streaming flows. In the present paper processes of non-equilibrium evaporation of small droplets will be discussed. As it was shown before, accounting for non-equilibrium effects in evaporation for many types of widely used liquids is crucial for droplet diameters less than 100 μm, while the surface tension effects essentially manifest only for droplets below 0.1 μm. Investigating the behavior of individual droplets in a heated air flow allowed to distinguish two scenarios for droplet heating and evaporation. Small droplets undergo successively heating, then cooling due to heat losses for evaporation, and then rapid heating till the end of their lifetime. Larger droplets could directly be heated up to a critical temperature and then evaporate rapidly. Droplet atomization interferes the heating, evaporation and combustion scenario. The scenario of fuel spray injection and self-ignition in a heated air inside combustion chamber has three characteristic stages. At first stage of jet injection droplets evaporate very rapidly thus cooling the gas at injection point, the liquid jet is very short and changes for a vapor jet. At second stage liquid jet is becoming longer, because evaporation rate decreases due to decrease of temperature. But combustion of fuel vapor begins which brings to increase of heat flux to droplets and accelerates evaporation. The length of the liquid jet decreases again and remains constant slightly oscillating.     

Six-month space greenhouse experiments--a step to creation of future biological life support systems

SVET Space Greenhouse (SG)--the first automated facility for growing of higher plants in microgravity was designed in the eighty years to be used for the future BLSS. The first successful experiment with vegetables was carried out in 1990 on the MIR Space Station (SS). The experiments in SVET SG were resumed in 1995, when an American Gas Exchange Measurement System (GEMS) was added. A three-month wheat experiment was carried out as part of MIR-SHUTTLE'95 program. SVET-2 SG Bulgarian equipment of a new generation with optimised characteristics was developed (financed by NASA). The new SVET-GEMS equipment was launched on board the MIR SS and a successful six-month experiments for growing up of two crops of wheat were conducted in 1996 - 97 as part of MIR-NASA-3 program. The first of these "Greenhouse" experiments (123 days) with the goal to grow wheat through a complete life cycle is described. Nearly 300 heads developed but no seeds were produced. A second crop of wheat was planted and after 42 days the plants were frozen for biochemical investigations. The main environmental parameters during the six-month experiments in SVET (substrate moisture and lighting period) are given. The results and the contribution to BLSS are discussed.     

Effect of heating on the dynamic behavior of a shell with partially damaged thermal insulation

The influence of aerodynamic heating of the aircraft skin with a partially damaged thermal insulation on its dynamic behavior is studied numerically. The study is carried out in two steps: the first step is to determine the temperature field in the shell; the second step is to measure the values of structure material characteristics depending on its temperature, to correct the stiffness matrix of the skin, and to solve the dynamics problem. The examples are considered.     

A technique of computer-aided synthesizing a finite element model of wing center section and outer wing torsion box joint for a transport aircraft

A technique of synthesizing the finite element model of the flange joint of the outer wing torsion box with the wing center section for a transport aircraft is presented. The technique is based on the functional decomposition principle, in which the general model of wing torsion box is synthesized from the separate substructure models including the flange joint. It has been shown that the manual input is significantly reduced, when the computer-aided synthesis is applied. This made it possible to cut time of synthesis and decrease the probability of error occurrence.