Autonomous navigation and guidance system for low thrust driven deep space missions

Presented herein is a concept of an Autonomous Navigation & Guidance System for electrically propelled deep space missions, including hardware configuration, algorithms for autonomous navigation and guidance, and estimates of potential guidance precision and mass consumption. This concept is actually a unified Navigation, Guidance and Attitude Control system. The unification is imposed by strong coupling between the orbital motion and the spacecraft attitude characteristic of low thrust space flights. The sensor set of the system consists of an optical instrument (Coupled Sun Star Tracker), and a block of four vector accelerometers. The propulsion subsystem is a set of nearly parallel Hall thrusters rigidly attached to the spacecraft body. The final stage of data processing is combining the thrust and torque programs and generating power and mass rate shares for every thruster. An end-to-end computer simulation provides guidance accuracy estimates versus the navigation data precision, flight time and available maximum thrust. Terminal guidance errors of a few tens of km in position and a few tens of cm/s in velocities are predicted under plausible assumptions on system parameters. Mass expenditures for the control are typically below one percent of total fuel mass budget.     

Main results and experience obtained on Mir space station and experiment program for Russian segment of ISS

This article presents main scientific and practical results obtained in course of scientific and applied research and experiments on Mir space station. Based on Mir experience, processes of research program formation for the Russian Segment of the ISS are briefly described. The major trends of activities planned in the frames of these programs as well as preliminary results of increment research programs implementation in the ISS' first missions are also presented.     

The challenges and opportunities of a commercial human spaceflight mission to the ISS

ESA astronauts' ISS flight opportunities are considered as a vital source to meet the utilisation, operation and political objectives that Europe has established for participating in the International Space Station programme. Recent internal ESA assessments have demonstrated that a rate of three flights per year for European Astronauts should be maintained as a minimum objective. The current flight rate is lower than this. In order to improve this situation, in the context of the activation of the ESA ISS Commercialisation programme, ESA is developing the conditions for the establishment of commercially based human spaceflights with the financial support of both ESA and the private sector or, in the future, only the latter. ESA is working in a Partnership with the space industry to facilitate the implementation of such projects and support customers with a range of end-to-end commercial services. The opportunities and challenges of a "commercial human spaceflight", involving a member of the European Astronaut Corps, or a privately employed flight participant, are discussed here.     

Erratum to: Determination of the Probability of Collision of Near-Earth Space Objects Taking into Account Form and Orientation

Cosmic Research - An Erratum to this paper has been published: https://doi.org/10.1134/S0010952521120030     

Space–Time Structure of Energetic Electron Precipitations according to the Data of Balloon Observations and Polar Satellite Measurements on February 1–6, 2015

Cosmic Research - The results of an analysis of the space–time characteristics and dynamics of precipitations of magnetospheric electrons with energies in the range from 0.1 to 0.7 MeV are...     

Does the endolymph pass through the base of the cupula?

Whether the endolymph of the semicircular canal passes the cupular partition or not was examined using the lateral semicircular canal system of adult pigeons (Columba livia). By applying various pressures by means of injection of a dye solution through the membranous canal, it was found that the dye solution, was seen to pass the cupula even under very low pressures when the pressure was increased gradually. When pulled by a magnet, the ultrafine particles of the dextran magnetite contained in the injected fluid were found to pass through the subcupular space without evident increase of the ampullary pressure.     

Cave biosignature suites: microbes,minerals, and Mars

Earth's subsurface offers one of the best possible sites to search for microbial life and the characteristic lithologies that life leaves behind. The subterrain may be equally valuable for astrobiology. Where surface conditions are particularly hostile, like on Mars, the subsurface may offer the only habitat for extant lifeforms and access to recognizable biosignatures. We have identified numerous unequivocally biogenic macroscopic, microscopic, and chemical/geochemical cave biosignatures. However, to be especially useful for astrobiology, we are looking for suites of characteristics. Ideally, "biosignature suites" should be both macroscopically and microscopically detectable, independently verifiable by nonmorphological means, and as independent as possible of specific details of life chemistries--demanding (and sometimes conflicting) criteria. Working in fragile, legally protected environments, we developed noninvasive and minimal impact techniques for life and biosignature detection/characterization analogous to Planetary Protection Protocols. Our difficult field conditions have shared limitations common to extraterrestrial robotic and human missions. Thus, the cave/subsurface astrobiology model addresses the most important goals from both scientific and operational points of view. We present details of cave biosignature suites involving manganese and iron oxides, calcite, and sulfur minerals. Suites include morphological fossils, mineral-coated filaments, living microbial mats and preserved biofabrics, 13C and 34S values consistent with microbial metabolism, genetic data, unusual elemental abundances and ratios, and crystallographic mineral forms.     

Structure of the Venusian atmosphere from surface up to 100 km

The goal of this paper is to summarize the experimental data on the atmosphere of Venus obtained after 1985, when the VIRA (Venus International Reference Atmosphere) or COSPAR model was published. Among the most important results that have appeared since then are the following: measurements of the vertical temperature profile by the VEGA spacecraft with high precision and high altitude resolution; measurements made with balloons of the VEGA spacecraft; radio occultation measurements of Magellan, Venera-15, and Venera-16; and temperature profiles derived from the data of infrared spectrometry obtained by Venera-15. The new result as compared to VIRA is the creation of a model of the atmosphere in the altitude range 55 to 100 km dependent on local time. This model is presented in our paper in tabulated form.     

Analyse du fonctionnement d'un propulseur a éjection modulée

ONERA developed, for studying the response of a propellant to a pressure or velocity fluctuation, an experimental rocket engine whose nozzle throat area can be modulated by a toothed disk.The paper presents a linearized theory of the functioning of this engine in the low frequency domain, i.e. when there is no wave propagation within the combuster.To describe the functioning of this motor, the Ryazantsev-Novozhilov method, which assumes that the gas response is instantaneous, is used. This analysis takes into account the erosion and radiation effects, the combustion efficiency and the thermal losses through the walls.Two particular cases are described, for two values of the Damköhler parameter $\text{D}{}_1\text{=}\text{t}{}_{\mathrm{c}}\text{t}{}_{\mathrm{th}}$, where t_c is the residence time in the combuster and t_th the characteristic thermal time of the heat penetration into the solid propellant. These two cases correspond, one to a classical propellant D₁ > 1, the other to a particular propellant of low burning rate ($\text{J}{}_{\mathrm{b}}\text{? 0.2}\text{to}\text{0.4}\text{mm s}{}^{\mathrm{?1}}$) D₁ < 1. The stability conditions are analysed as well as the pressure amplitute and phase as a function of the nozzle throat modulation frequency.Still in linearized theory, the complete solutions of the problem are presented, using a method of numerical resolution.