有控飞行器非线性气动模型结构的确定（Ⅰ）

非线性气动模型结构确定是飞行器参数辨识中极其重要的问题。首先给出了非线性气动模型的数学描述,在此基础上,以导弹纵向及侧向运动方程为例,首次系统地分析了有控飞行器非线性气动模型结构确定中必然存在的共线性问题。频域分析过程清晰地表明在通常的试验情况下,m_z~α及m_z~(ω_z)是不可单独辨识的,从理论上解释了国内外一直不单独辨识它们的原因所在。指出原有的模型结构确定方法,如AIC准则,逐步回归等已不再适用于非线性气动模型结构的确定。同时对参数的可辨识性也作了一定的讨论。     

Instability and unsteadiness of aircraft wake vortices

This paper presents a review of theoretical and experimental results on stability and other unsteady properties of aircraft wakes. The basic mechanisms responsible for the propagation and the amplification of perturbation along vortices, namely the Kelvin waves and the cooperative instabilities, are first detailed. These two generic unsteady mechanisms are described by considering asymptotic linear stability analysis of model flows such as vortex filaments or Lamb–Oseen vortices. Extension of the linear analysis to more representative flows, using a biglobal stability approach, is also described. Experimental results obtained using LDV, hot wire and PIV in wind tunnels are presented and they are commented upon the light of theory.     

税务筹划的主体、目标及学科定位

对税务筹划主体与概念、原则与目标、学科定位等基本理论问题进行了初步探讨，认为税务筹划主体应是纳税人而不包括税收征管方。税务筹划的行为人既可以是税务筹划主体，也可以是社会中介机构。税务筹划是纳税人的一项基本权利，但应该遵循守法、成本效益等项原则，不可恶意挑战税法。税务筹划目标具有层次性，即可划分为基本目标与具体目标两个层次，基本目标应该注意保持与财务目标的一致性，具体目标可以是多项，具有针对性和从属性。税务筹划是连接会计学、财务学与税收学的一门边缘性、交叉性学科。从学科建设的角度分析，在会计学专业，税务筹划应该是税务会计的组成部分，其中战略性筹划内容，也可以作为战略管理会计的组成部分或形成“税务管理会计”；而在财务学专业，税务筹划应是一门新兴学科，属于财务学的范畴。税务筹划理论研究属于应用理论研究，其实施手段、技术方法更是具有较强的实用性。     

低膨胀高温合金的发展及在航空航天业的应用

回顾了低膨胀高温合金的发展历史."因瓦效应"和"时效硬化"现象的发现奠定了低膨胀高温合金发展的基础.20世纪70年代航空航天事业的迅猛发展以及能源危机的爆发为低膨胀高温合金在航空航天业的实际应用提供了宝贵的契机, 最早的商用Fe-Ni-Co(IN9××)系列合金,经过用Nb、Ti强化,去Al,加Si等一系列成分上的变化,显著改善其应力加速晶界氧化脆性(SAGBO性能),从此低膨胀高温合金在航空航天领域得到大量应用.为改善此类合金的抗氧化和降低裂纹扩展速率等性能,又进行了新合金系的研究,即以Inconel 783合金为代表的Fe-Ni-Co-Al-Cr系合金和以Haynes 242合金为代表的Ni-Mo-Cr系合金的研究,这些合金在750℃仍能达到完全抗氧化,为新一代飞机发动机的发展提供了优质材料.     

A new and robust CFAR detection algorithm

A constant false alarm rate (CFAR) detection method which is based on a combination of median and morphological filters (MEMO) is proposed. The MEMO algorithm has robust performance with small CFAR loss, very good behavior at clutter edges and high detection performance in the case of closely spaced narrowband signals (targets). The proposed MEMO method is favourably compared with cell averaging (CA) and ordered statistics (OS) CFAR detectors. The Monte Carlo method is employed to analyze the MEMO-CFAR detector     

微细孔电加工技术

概述微细孔放电加工技术和电化学加工技术的特点和研究进展。     

月球探测器姿态大角度机动的反作用轮控制

研究了月球探测器转速与控制力矩受限的姿态大角度机动问题。根据时间变尺度思想，提出了双回路反馈的姿态大角度机动控制方法。以某型月球控测器为例，对该方法进行了仿真验证。结果表明，利用该控制方法，可使探测器以期望的角速度转动，从而完成探测器的姿态大角度机动。     

UKF方法及其在方位跟踪问题中的应用

采用UKF(Unscented Kalman Filter)方法处理了平面内地面站对目标的方位跟踪的估计问题。目标的位置和速度由选定的高斯分布采样点来近似，在每个更新过程中，采样点随着状态方程传播并随着非线性测量方程变换，由此不但得到目标位置和速度的均值及较高的计算精度，而且避免了对非线性方程的线性化过程。仿真结果表明，UKF方法比传统的扩展卡尔曼滤波(EKF)算法有更高的估计精度，并能有效地克服非线性严重时，方位跟踪问题中很容易出现的滤波发散问题。     

The Genesis Solar-Wind Collector Materials

Genesis (NASA Discovery Mission #5) is a sample return mission. Collectors comprised of ultra-high purity materials will be exposed to the solar wind and then returned to Earth for laboratory analysis. There is a suite of fifteen types of ultra-pure materials distributed among several locations. Most of the materials are mounted on deployable panels (‘collector arrays’), with some as targets in the focal spot of an electrostatic mirror (the ‘concentrator’). Other materials are strategically placed on the spacecraft as additional targets of opportunity to maximize the area for solar-wind collection. Most of the collection area consists of hexagonal collectors in the arrays; approximately half are silicon, the rest are for solar-wind components not retained and/or not easily measured in silicon. There are a variety of materials both in collector arrays and elsewhere targeted for the analyses of specific solar-wind components. Engineering and science factors drove the selection process. Engineering required testing of physical properties such as the ability to withstand shaking on launch and thermal cycling during deployment. Science constraints included bulk purity, surface and interface cleanliness, retentiveness with respect to individual solar-wind components, and availability. A detailed report of material parameters planned as a resource for choosing materials for study will be published on a Genesis website, and will be updated as additional information is obtained. Some material is already linked to the Genesis plasma data website (genesis.lanl.gov). Genesis should provide a reservoir of materials for allocation to the scientific community throughout the 21st Century. This revised version was published online in August 2006 with corrections to the Cover Date.     

Eruptive prominences as sources of magnetic clouds in the solar wind

Large amounts of coronal material are propelled outward into interplanetary space by Coronal Mass Ejections (CMEs). Thus one might expect to find evidence for expanding flux ropes in the solar wind as well. To prove this assumption magnetic clouds were analyzed and correlated with H-observations of disappearing filaments. When clouds were found to be directly associated with a disappearing filament, the magnetic structure of the cloud was compared with that of the associated filament. Additionally the expansion of magnetic clouds was examined over a wide range of the heliosphere and compared with the expansion observed for erupting prominences.