Ultra triple-junction high-efficiency solar cells

Solar cells suitable for the space environment must combine high-efficiency, high energy density, and radiation hardness in a manufacturable design. As improvement in one performance parameter usually results in degradation in one or more of the remaining parameters, careful optimization is required to enhance overall performance. The ultra triple-junction cell developed builds upon the established success of the fully qualified improved triple-junction cell currently in production. In the ultra triple-junction cell configuration, improved robustness and efficiency after radiation exposure augment a cell design expected to deliver 28% beginning-of-life efficiency in production.     

Nature's efficient energy production, storage, and data processing

Converting the solar energy received on the surface of the Earth has not been practical with heat engines because of the low density of this energy. On a clear bright day in the summer, the sun generally delivers less than 80 W per square foot. Also, heat engines are prohibited from exceeding the Carnot-cycle efficiency limit. On the other hand, plants perform their energy conversion electrochemically, and, hence, are not limited by the Carnot-cycle. They use solar energy to produce useful fuels that range from corn-cobs and maple syrup to pitch and firewood. However, they have an extremely complicated process control that uses blue and red parts of the visible solar spectrum to extract hydrogen from water and carbon from carbon dioxide to make hydrocarbons. They do not need precious-metal catalysts; however they run complex data processing programs in which stored instructions control electrochemical reactions and also cause growth and production of needed products to occur when needed.     

PWM full-bridge converter with natural input power factor correction

A pulsewidth modulated (PWM) full-bridge converter that simultaneously performs input power factor correction (PFC) and DC-DC conversion is proposed. The converter is the same as the standard voltage-fed PWM full-bridge converter with a diode-bridge low-pass filter front end, but with a slight modification that results in an improvement in power factor that is sufficient to satisfy the EN61000-3-2 requirements for electrical equipment. The operation of the converter is explained and analyzed, and the results of the analysis are used to determine the converter's steady-state characteristics, which are discussed in detail. A design procedure for the selection of components is then derived and demonstrated with an example. The feasibility of the converter and its ability to satisfy EN61000-3-2 requirements on electrical equipment is shown with results obtained from an experimental prototype.     

3D Coronal structures and their evolutions measured by Stereoscopy,consequences for Space Weather and the STEREO mission

We are discussing methods of stereoscopic 3D reconstruction of coronal loops structures. In our most sophisticated method we fit loops observed with SOHO/EIT to a set of shape parameters including the internal twist of the loops field lines. We define this twist as the number of turns of the field line around a torus axis between the footpoints of the loops. Twist numbers of the order 0–2 are observed. We observe the emergence of an Active Region with twisted loops which detwist as they expand. The same correlation between detwisting and expansion is observed with filaments in relation to CME formations. On longer time scale, loops seem to accumulate twist, perhaps due to differential rotation. Rapid losses of twist temporarily correlate with flares. From our analysis, we expect that the internal twist of coronal structures will play an important role for the space weather forecast. This revised version was published online in August 2006 with corrections to the Cover Date.     

Novel sensor technology for monitoring and control of critical plant nutrient parameters.

A novel dielectric sensor technology has been developed for monitoring and control of plant nutrient delivery systems as part of NASA's Controlled Ecological Life Support System (CELSS) program. A unique measurement phenomenon was discovered in which the electrostatic field is shunted to a third terminal of the sensor, resulting in a much greater sensitivity to changes in the complex dielectric properties of the nutrient solution. Based on this phenomenon, a small, flexible, thin-film shunting dielectric sensor (SDS) was designed to provide low-frequency, non-invasive measurement of both the thickness and nutrient concentration of the layer of solution on a plant growth surface. Test results indicate a sensitivity of +/- 0.05mm in layer thickness while characterization of the ability to measure nutrient concentration continues. The development plan for this sensor is presented and other applications are discussed.     

Observations of Magnetospheric Waves and their Relation to Precipitation

Magnetospheric wave observations are discussed from the viewpoint of their potential importance for precipitation of charged particles into the auroral zones. While wave processes are a fundamental part of magnetospheric plasma physics, occurring most of the time in most of the magnetospheric regions, their direct role in and relative importance for auroral precipitation are not easy to assess. The role of the waves varies from one spatial region to another and is very different for electrons and ions. Furthermore, the distinction between wave processes and other precipitation mechanisms is not at all straightforward. This review focuses on four main topics: The problem of diffuse electron precipitation, the recent surprise on the detailed structure of broad-banded electrostatic noise in the plasma sheet boundary layer, ion precipitation through electromagnetic ion cyclotron waves, and the role of low-altitude waves in precipitation. It is concluded that, while the observational status of high-altitude ion cyclotron waves is reasonably good, in most areas more thorough studies of existing data as well as refined observations are very much needed. Successful observational studies are to be carried out jointly with theoretical work as well as with studies on the large-scale context of the often localized wave processes. This is especially important when interests are moving toward more nonlinear phenomena, such as shocks, double layers, or strong quasi-static gradients, where a strict adherence to classical wave concepts is becoming more and more diffuse and less motivated.     

Avionics cost of ownership

The cost of ownership of avionics includes not only the development and acquisition cost, but also the yearly operating and support (O and S) (maintenance) cost of hardware, software, and support equipment. This paper presents an avionics cost of ownership methodology developed for USAF, its data sources, and business metrics computed for USAF decision makers as we move toward operating avionics as a business. The business model is used to determine which existing avionics are candidates for replacement with new technology and to prioritize the replacements. These avionics are often used on multiple aircraft types which necessitates analysis of the causes of the high cost of ownership on each type. Databases are used to document the processing functions, data flow, and constraints of the item being analyzed. These constraints include physical, environmental, electrical, and data interfaces. Databases containing alternatives are evaluated against standard mission scenarios for aircraft utilizing these high cost avionics to determine their impact on performance, O and S costs, and mission effectiveness. The results of the foregoing analyses steps are then used in life cycle cost analyses which consider different retrofit scenarios for each alternative for each aircraft type against the avionics being analyzed for replacement. The alternatives are prioritized and a risk analysis performed considering technical, schedule, and cost growth risks. The avionics cost of ownership methodology described in this paper processes data from USAF maintenance organizations. This has revealed the very large expenditures being made to support highly unreliable avionics. These methods can be applied to all military and commercial aircraft systems to determine not only the cost of ownership of existing systems, but also the cost of ownership of new systems when they are retrofit     

GNSS receiver for GLONASS signal reception

This paper deals with the latest version of Experimental GNSS receiver built at the Czech Technical University and describes integration of GLONASS signal processing to the receiver. The new FPGA platform Virtex-D Pro by Xilinx is used and enables integration of whole digital signal processing of GNSS receiver into the single chip. The RE unit of the receiver is capable of processing all GLONASS frequency of the Li and L2 bands in two independent RE channels; each channel can process one band. The frequency selection of the appropriate satellite is accomplished in a digital correlator. The development flow of the GLONASS correlator is discussed herein. The complexity of the GLONASS correlator with complexity of GPS correlator is compared. The developed GLONASS correlator was tested in Simuelink tool during development. The next test was carried out using GLONASS simulator and real GLONASS satellite signal.     

Radiation biodosimetry: applications for spaceflight.

The multiparametric dosimetry system that we are developing for medical radiological defense applications could be adapted for spaceflight environments. The system complements the internationally accepted personnel dosimeters and cytogenetic analysis of chromosome aberrations, considered the best means of documenting radiation doses for health records. Our system consists of a portable hematology analyzer, molecular biodosimetry using nucleic acid and antigen-based diagnostic equipment, and a dose assessment management software application. A dry-capillary tube reagent-based centrifuge blood cell counter (QBC Autoread Plus, Becton [correction of Beckon] Dickinson Bioscience) measures peripheral blood lymphocytes and monocytes, which could determine radiation dose based on the kinetics of blood cell depletion. Molecular biomarkers for ionizing radiation exposure (gene expression changes, blood proteins) can be measured in real time using such diagnostic detection technologies as miniaturized nucleic acid sequences and antigen-based biosensors, but they require validation of dose-dependent targets and development of optimized protocols and analysis systems. The Biodosimetry Assessment Tool, a software application, calculates radiation dose based on a patient's physical signs and symptoms and blood cell count analysis. It also annotates location of personnel dosimeters, displays a summary of a patient's dosimetric information to healthcare professionals, and archives the data for further use. These radiation assessment diagnostic technologies can have dual-use applications supporting general medical-related care.