Investigation of phase transition-based tethered systems for small body sample capture

This paper summarizes the modeling, simulation, and testing work related to the development of technology to investigate the potential that shape memory actuation has to provide mechanically simple and affordable solutions for delivering assets to a surface and for sample capture and possible return to Earth. We investigate the structural dynamics and controllability aspects of an adaptive beam carrying an end-effector which, by changing material equilibrium phases, is able to actively decouple the end-effector dynamics from the spacecraft dynamics during the surface contact phase. Asset delivery and sample capture and return are at the heart of several emerging potential missions to small bodies, such as asteroids and comets, and to the surface of large bodies, such as Titan.     

Concept of monitoring for thermostressed state and service life of aircraft gas turbine engine blades

A concept of monitoring for material properties with residual life estimation of rotor blades for gas turbine engines is proposed. The structure of on-board control and conditionmonitoring system based on the intelligent pyrometer module with the algorithm for calculating the residual life of turbine rotor blades is described.     

Analysis of a beam with a crack under irregular cyclic load

This paper considers a beam with a technological longitudinal section on the level of the gravity center of the cross section that is loaded by a vertical concentrated force. We study the structure durability depending on the load amplitude and the initial crack length.     

Improvement of gas-dynamic efficiency of GTE gas turbine stages at the design stage

Methods to control flow have been considered in order to reduce end losses in blade rows of GTE gas turbines by means of measures taken at the design stage.     

导风轮叶片偏置对高压比串列离心压气机性能的影响

为提升高压比串列离心压气机的性能,借鉴常规一体化离心叶轮中偏置分流叶片的方法,针对某高压比串列离心压气机,应用数值仿真手段分析了串列叶轮中导风轮叶片周向偏置对压气机流场和性能的影响。通过对不同导风轮叶片偏置方案下压气机流场的分析,建立了压气机流动损失与偏置参数的关联性。研究表明:采用较大的偏置参数γ可降低导风轮叶片1前缘的激波强度,改善激波作用导致的泄漏涡破碎和流动分离,但过大或过小的γ方案中导风轮叶顶会出现二次泄漏致使低能流体的掺混损失增加;γ=65%方案压气机综合性能最佳,其压比和效率较γ=50%分别提高了1.5%和1.4%;对于串列离心压气机导风轮叶片周向位置的优化,在避免导风轮叶顶形成较强二次泄漏的前提下,应考虑采用较大的偏置参数γ,同时应防止诱导轮尾迹流体参与导风轮的叶顶泄漏。     

喷流对飞机尾流涡影响的试验研究

飞机产生的尾流涡,特别是大尺度的翼尖涡,对尾随其后的飞行器是非常有害的,本文旨在探索利用飞机发动机产生的喷流加速尾流涡消亡的方法。试验采用简化的飞机模型(有尾翼),建立了包含一对翼尖涡及一对反向旋转的尾翼涡(通过以负迎角安装尾翼得到)的4涡尾流系统。在无外来扰动的情况下,不同的尾翼设置下得到的尾翼涡对翼尖涡的作用效果不同,有的能导致翼尖涡提前消亡,有的则不能。考察了不同强度的喷流对不同4涡尾流系统的影响,且作为对比,对无尾翼(2涡系统)及无喷流下的各种情况也分别作了观测。试验在拖曳水槽中进行,运用体视粒子图像测速(SPIV)技术,观测了与模型拖曳方向垂直的、从机翼后缘到下游约45翼展间均布的一系列切面。结果表明:当喷流直接作用于涡时,其效果主要取决于两者之间的初始距离及相对强度;而当喷流作用于整个4涡尾流系统时,其引入的扰动对不同的系统均能起到一定程度的改善作用,这种作用的关键在于利用喷流优化对翼尖涡进行扰动的机制,而不仅仅取决于喷流的强度。