2 AU以内的“渐进型”太阳高能粒子事件模拟

太阳高能粒子（Solar Energetic Particle,SEP）事件是影响地球空间以及深空辐射环境的主要因素之一。“渐进型”太阳高能粒子事件中的高能粒子主要来自于日冕物质抛射（Coronal Mass Ejection,CME）所驱动的激波扩散加速（Diffusive Shock Acceleration,DSA）过程。CME驱动的激波在行星际的传播过程中,其结构不断演化,进而影响到高能粒子的加速过程。本文利用二维太阳高能粒子加速和传播模型,对发生于2014年4月18日的太阳高能粒子事件实例进行了数值模拟。模型考察了黄道面上2 AU的距离以内包含地球所在位置的4个不同点,分别计算了每个点上高能粒子的通量。数值模拟的结果表明：黄道面内不同位置的观察点,与激波波前的磁力线连接不同,从而导致观察点处高能粒子的通量有着显著的差异。该模型的计算结果可以为深空探测计划开展辐射环境研究提供必要的输入。     

Study of ionospheric D region changes during solar flares using MF radar measurements

During solar flares, the X-ray radiation suddenly increases, resulting in an increase in the electron density of the atmospheric D region and a strong absorption of short-wave radio waves. Based on Langfang medium frequency (MF) radar, this paper analyzed the variation characteristics of D region in the lower ionosphere from 62 km to 82 km. The analysis focused on multiple C-level and M-level solar flare events before and after the large-scale flare event at 11:53 (UT) on September 6, 2017. The results show that it is difficult to detect the electron density over 70 km in Langfang during solar flares, but the electron density value can be obtained as low as 62 km, and the stronger the flare intensity, the lower the detectable electron density height. Besides, the equal electron density height, the received power of X and O waves will also be significantly reduced during the flares, and the reduction of equal electron density height has a weak linear relationship with flare intensity.     

Analysis of the dynamic behavior of structures using the high-rate GNSS-PPP method combined with a wavelet-neural model: Numerical simulation and experimental tests

Recently, the high rate global navigation satellite system-precise point positioning (GNSS-PPP) technique has been used to detect the dynamic behavior of structures. This study aimed to increase the accuracy of the extraction oscillation properties of structural movements based on the high-rate (10?Hz) GNSS-PPP monitoring technique. A developmental model based on the combination of wavelet package transformation (WPT) de-noising and neural network prediction (NN) was proposed to improve the dynamic behavior of structures for GNSS-PPP method. A complicated numerical simulation involving highly noisy data and 13 experimental cases with different loads were utilized to confirm the efficiency of the proposed model design and the monitoring technique in detecting the dynamic behavior of structures. The results revealed that, when combined with the proposed model, GNSS-PPP method can be used to accurately detect the dynamic behavior of engineering structures as an alternative to relative GNSS method.     

一种基于卷积神经网络的地磁基准图构建方法

地磁匹配导航技术是一种重要的辅助导航制导方法，地磁基准图的构建精度对地磁匹配制导的精准度起着决定性作用。针对现有地磁基准图构建精度难以满足实际地磁匹配导航需求的问题，提出了一种基于卷积神经网络的地磁基准图构建方法。首先，利用卷积层提取低分辨率基准图中的特征图像块；然后，利用基于学习的阈值收缩算法（LISTA）实现图像块的稀疏表示；最后，利用三通道的地磁信息得到重建后的高分辨率基准图。实验结果表明:所提方法对地磁基准图具有更高的构建精度，同时对噪声有更好的鲁棒性，各种客观评价指标均高于现有的超分辨率重建方法。      

全模颤振双索悬挂系统刚体模态频率研究

研究绳系结构和绳索预紧力对全模颤振双索悬挂系统刚体模态频率的影响。首先，基于绳索并联机构理论，对双索悬挂系统进行静力学建模，引入加权矩阵，推导了双索悬挂系统静刚度模型；其次，建立双索悬挂系统无阻尼振荡方程，分析双索悬挂系统刚体模态频率变化规律；进而，搭建了双索悬挂系统地面样机，开展系统模态频率测试试验，研究系统刚体模态频率的影响因素及其变化规律；最后，参考试验结果修正所建数学模型。结果表明，随着绳索预紧力的增加，系统刚体模态频率呈上升趋势，但各阶刚体模态的固有频率上升速率不同，平动模态的固有频率受绳索预紧力影响比转动模态小得多；在转动模态方面，滚转模态的固有频率最大且上升快；在平动模态方面，升沉模态的固有频率大于横侧滑模态的固有频率；双索经过的机身前后滑轮与飞机模型质心之间的相对位置变化会不同程度地影响支撑系统俯仰模态、偏航模态的固有频率，但几乎不影响其滚转模态的固有频率。研究发现，通过控制悬挂绳索预紧力的大小，合理设计机身上的滑轮安装位置，能够有效降低双索悬挂系统刚体模态频率。研究结果对于优化设计全模颤振双索悬挂系统具有指导意义。     

Predicting performance in manually controlled rendezvous and docking through spatial abilities

Manually controlled rendezvous and docking (manual RVD) is a challenging space task for astronauts. This study aims to identify spatial abilities that are critical for accomplishing manual RVD. Based on task analysis, spatial abilities were deduced to be critical for accomplishing manual RVD. 15 Male participants performed manual RVD task simulations and spatial ability tests (the object-manipulation spatial ability and spatial orientation ability). Participants’ performance in the test of visualization of viewpoints (which measures the spatial orientation ability) was found to be significantly correlated with their manual RVD performance, indicating that the spatial orientation ability in the sense of perspective taking is particularly important for accomplishing manual RVD.     

Sliding mode control design for oblique wing aircraft in wing skewing process

When the wing of Oblique Wing Aircraft (OWA) is skewed, the center of gravity, inertia and aerodynamic characteristics of the aircraft all significantly change, causing an undesirable flight dynamic response, affecting the flying qualities, and even endangering the flight safety. In this study, the dynamic response of an OWA in the wing skewing process is simulated, showing that the three-axis movements of the OWA are highly coupled and present nonlinear characteristics during the wing skewing. As the roll control efficiency of the aileron decreases due to the shortened control arm in an oblique configuration, the all-moving horizontal tail is used for additional roll and the control allocation is performed based on minimum control energy. Given the properties of pitch-roll-yaw coupling and control input and state coupling, and the difficulty of establishing an accurate aerodynamic model in the wing skewing process due to unsteady aerodynamic force, a multi-loop sliding mode controller is formulated by the time-scale separation method. The closed-loop simulation results show that the asymmetric aerodynamics can be balanced and that the velocity and altitude of the aircraft maintain stable, which means that a smooth transition is obtained during the OWA’s wing skewing.     

基于集成学习模型的飞行学员认知负荷研究

在飞行过程中,飞行员需要在短时间内接收大量信息,并做出正确的判断与决策,而过高的认知负荷会影响其感知、判断、决策等认知过程,进而影响飞行安全。首先通过飞行模拟实验获取飞行学员在执行不同飞行任务时的生理数据;然后通过时域、频域分析等方法提取呼吸和心电信号的特征,并通过统计学方法筛选出能够反映认知负荷水平的指标;最后结合支持向量机、K 最邻近、人工神经网络等方法建立集成学习模型,对飞行学员的认知负荷进行评估,并与单一算法进行对比。结果表明：本文建立的集成学习模型具有较高的准确率,能够更好地反映飞行学员认知负荷水平。     

重型燃气轮机高雷诺数CDA叶型转捩特性数值计算

为研究重型燃气轮机的压气机叶片在高雷诺数工况下的气动性能,基于Gamma-Theta转捩模型的雷诺时均方程对某可 控扩散叶型进行了数值计算。通过对比不控制马赫数与控制马赫数,分析高雷诺数对可控扩散叶型气动性能及转捩特性的影响。 结果表明：在不控制马赫数条件下,在零攻角时,雷诺数从7×10 5 增大为9×10 5 ,总压损失增加了约391.95%;在高雷诺数工况下随 着雷诺数的增大,叶片流动损失不断增大,叶片可用攻角范围减小,同时在叶片吸力面出现激波,干扰转捩的产生。在控制马赫数 条件下,当Ma=0.6时,在零攻角工况下,雷诺数从8.2×10 5 增大为1×10 7 ,总压损失减小了约38.98%,吸力面转捩起始点从4.78%弦 长处前移至1.11%弦长处;在高雷诺数工况下,叶片流动损失随着雷诺数的增大不断减小,吸力面转捩位置前移。     

带连续爆震加力燃烧室的涡轮发动机循环及推进性能研究

为进一步提升现有涡轮喷气发动机推进性能,可以采用连续爆震加力燃烧室,针对此,本文首先建立考虑了三种耦合热力过程的连续爆震燃烧室热力过程分析模型,通过与传统涡轮发动机性能分析模型相耦合,分析了带连续爆震加力燃烧的涡轮发动机推进性能及加力燃烧室部件特性。结果表明,由于连续爆震燃烧室具有自增压特性,当将其替代传统加力燃烧室可以显著提升加力时涡轮发动机性能;但另一方面,作为加力燃烧室,由于涡轮后气流温度过高,导致连续爆震加力燃烧室增压比的降低,通过对发动机循环参数的选择可以得到改善;同时,连续爆震加力燃烧室部件特性还受到燃烧室进气损失、反应物填充速度及反应物提前燃烧比例影响。