低密度高亚声速引射风洞设计及性能研究

研究以火星表面大气条件和火星飞行器飞行速度为基础，设计一个低密度高亚声速引射风洞，并运用ANSYS FLUENT 15.0对多喷嘴引射风洞的性能进行了数值计算分析。首先对计算进行了网格无关性验证，在保证计算精度和减少时间与计算资源的基础上，通过研究发现：多喷嘴引射器作为风洞动力系统可满足试验段马赫数达到0.77的高亚声速马赫数要求，并且对试验段上下壁面采用各1°的扩张角可有效降低试验段边界层对压力的影响，从而使试验段静压基本维持不变；提高引射膨胀比是提高试验段雷诺数的一个有效措施，但是会降低引射系数，同时会增加试验段的静压梯度，影响试验段的气流品质。因此低密度引射风洞设计过程中必须综合考虑试验段扩张角，引射膨胀比等因素。     

Comparison of Ionospheric Total Electron Content (TEC) over Sonmiani (Pakistan) with NeQuick-2 and IRI-2012 during July 2014 – June 2015

In this study, Total Electron Content (TEC) observations acquired by a GNSS receiver installed at Sonmiani (Geog. Coord. 25.19°N, 66.74°E, Geomag. Coord. 17.62°N, 141.5°E) are being reported for the first time. The data utilized is hourly instantaneous TEC values during 10 International Quiet Days (IQDs) per month from Jul-14 to Jun-15, totaling 120 observation days for monitoring nominal TEC. The findings confirm the semi-annual trend of TEC over Sonmiani, which lies at the northern crest of Equatorial Ionization Anomaly (EIA) region. The TEC measurements are then compared with NeQuick-2 and International Reference Ionosphere (IRI-2012) models. It was found that the TEC values derived from NeQuick-2 are in better agreement with GNSS measurements than those from IRI-2012. The TEC measurements also show seasonal variation which is largest during Equinox months. The TEC value in Dec solstice is higher than the Jun solstice, which confirms that the seasonal anomaly is playing a major role in this region during the course of study.     

Compensation of base disturbance using optimal trajectory planning of dual-manipulators in a space robot

This paper presents a trajectory planning algorithm for a space robot with dual-manipulators. Here one manipulator of the space robot captures a target, and another manipulator is free. In this case, this study uses one manipulator as the mission manipulator to capture the target, and another as the balance manipulator aiming at the compensation of the pose disturbance. For this method, a novel trajectory planning algorithm applied to the balance manipulator is presented. The trajectory planning problem is transformed into series of problems of the optimal state solution, and then the iterative algorithms for the trajectory planning are designed. In the iterative algorithms, the bias force on the spacecraft base caused by the balance manipulator is used as the compensation force. Then, to calculate the expected compensation force and torque, a pose control law for the spacecraft base is introduced. The expected compensation force and torque provide equality constraints for optimization problems, which implies that the trajectory planning algorithm compensates for not only the disturbance generated by the manipulator’s motion, but also environmental disturbances. This is because the expected compensation force and torque depend on the pose change of the spacecraft base rather than the type of the disturbance. Numerical simulation was carried out to analyze the proposed trajectory planning method. It was observed that the method greatly reduces the disturbance of Manipulator A on the spacecraft base. These results validated the effectiveness of the proposed method for the trajectory planning to make the spacecraft base disturbance up to minimum.     

NB-IoT模块与电信物联网开放平台的通信研究

中国电信物联网开放平台实现对各种NB-IoT设备数据的统一管理,同时向第三方应用系统开发接口,让各种应用能快速构建自己的物联网业务。本文构建物联网系统,终端利用DS18B20温度传感器采集环境温度,通过BC35-G模块以CoAP协议将温度传输至电信物联网开放平台。     

Comparison of RO tropopause height based on different tropopause determination methods

The tropopause is an important boundary in the Earth’s atmosphere, and has been the subject of close attention from atmosphere and climate researchers. To monitor the global tropopause using radio occultation (RO) data, there are two primary methods, one is the widely used temperature lapse rate method, and the other is the bending angle covariance transform method which is unique to RO data. We use FengYun3-C (FY3C) and Meteorological Operational Satellite Program (MetOp) RO data and European Centre for Medium-Range Weather Forecasts (ECMWF) operational analysis data to determine differences in RO tropopause height calculated by these two methods. We compute biases of the RO lapse rate tropopause height (LRTH) and the RO bending angle tropopause height (BATH) relative to the ECMWF LRTH. The dependences of the tropopause height biases on tropopause height (TPH) retrieval method, latitude, season and RO mission are investigated. The results indicate that BATH show a consistent 0.8–1.2 km positive bias over the tropics and high latitude regions compared with LRTH, however, over 25° to 40° latitude in both hemisphere, BATH results are less stable. Furthermore, the mean bias between BATH and LRTH displayed a different symmetrical characteristic from 2017.12 to 2018.2 (DJF) compared to 2018.6–2018.8 (JJA). However, except for some bias over Antarctica, the mean value of both LRTH and BATH show a similar tropopause variation, indicating the consistency of both methods.     

一种面向在轨服务的空间遥操作人机交互方法

为了解决人在遥操作回路中,人与操作目标时空隔离、缺乏环境信息和天地回路大时延等实际问题,以及减少空间机器人缺乏自主智能性和操作者手抖颤等不利因素,针对空间在轨服务操作交互问题,提出一种基于增强虚拟安全通道(AVSC)的分层辅助遥操作(LAT)方法。首先,设计组合体增强虚拟安全通道,通过给主端操作者施加虚拟引导力辅助完成操作任务,与徒手操作相比,操作时间短、操作平稳;其次,设计分层辅助遥操作系统,通过获取空间机器人末端与期望轨迹上最近点之间的距离,在安全通道内划分不同的虚拟力场,辅助操作者更加灵活地操作。演示实验表明,该方法利用力触觉和视觉信息,引导操作者控制空间机器人末端运动至期望位置,可以有效地提高操作精度、减轻操作者心理压力和减少操作时间。     

嫦娥五号探测器多舱段间接力式校时及误差控制方法

为优化嫦娥五号探测器操控,达到通过给任意具备测控链路的舱段校时即可实现多舱段组合体时间同步的目标,提出了一种接力式校时及误差控制方法。该方法通过相邻舱段间接力式时间传递实现舱段间时间自流动。设计了基于飞行模式的时间基准设备检索方法,通过统一的检索配置表使各设备能够根据飞行模式识别上级时间基准设备,实现了各舱段的自主校时。设计了总线控制器(Bus controller,BC)与远置单元(Remote terminal,RT)间的分布式时间传递误差控制方法,BC端修正时间信息发送时产生的误差,RT端控制时间信息接收时引入的误差,保证了整器时统精度。研究方法实现了多舱段复杂航天器的器内自组织时统,已在嫦娥五号探测器上得到应用并取得预期效果,可为后续航天器软件设计提供参考。     

固液混合火箭发动机固体燃料的燃速计算

分析了固液混合火箭发动机的燃烧特点、燃烧中气相过程和固体燃料内部的传热过程,利用由传热理论得出的固体燃料燃速公式和阿累尼乌斯(Arrhenius)燃速公式耦合计算,得到了燃速与氧化剂流率、轴向距离、装药初温和时间的变化规律.计算结果表明固体燃料燃速主要受氧化剂流率和轴向距离的影响,随氧化剂流率的增加而增加,随轴向距离的增加而减小.固体燃料燃速温度敏感性小,在设计发动机时可以不考虑装药初温的影响.利用热力计算得到了绝热燃烧温度与氧化剂流率和药柱长度的变化规律,绝热燃烧温度随氧化剂流率的增加存在一最大值.计算结果与相关文献的报道比较吻合,为进一步研究固液混合火箭发动机的燃烧及流动问题打好了基础.