The X-ray/Gamma-ray Spectrometer on the Near Earth Asteroid Rendezvous Mission

An X-ray/gamma-ray spectrometer has been developed as part of a rendezvous mission with the near-Earth asteroid, 433 Eros, in an effort to answer fundamental questions about the nature and origin of asteroids and comets. During about 10 months of orbital operations commencing in early 1999, the X-ray/Gamma-ray Spectrometer will develop global maps of the elemental composition of the surface of Eros. The instrument remotely senses characteristic X-ray and gamma-ray emissions to determine composition. Solar excited X-ray fluorescence in the 1 to 10 keV range will be used to measure the surface abundances of Mg, Al, Si, Ca, Ti, and Fe with spatial resolutions down to 2 km. Gamma-ray emissions in the 0.1 to 10 MeV range will be used to measure cosmic-ray excited elements O, Si, Fe, H and naturally radioactive elements K, Th, U to surface depths on the order of 10 cm. The X-ray spectrometer consists of three gas-filled proportional counters with a collimated field of view of 5° and an energy resolution of 850 eV @ 5.9 keV. Two sunward looking X-ray detectors monitor the incident solar flux, one of which is the first flight of a new, miniature solid-state detector which achieves 600 eV resolution @ 5.9 keV. The gamma-ray spectrometer consists of a NaI(Tl) scintillator situated within a Bismuth Germanate (BGO) cup, which provides both active and passive shielding to confine the field of view and eliminate the need for a massive and costly boom. New coincidence techniques enable recovery of single and double escape events in the central detector. The NaI(Tl) and BGO detectors achieve energy resolutions of 8.7% and 14%, respectively @ 0.662 MeV. A data processing unit based on an RTX2010 microprocessor provides the spacecraft interface and produces 256-channel spectra for X-ray detectors and 1024-channel spectra for the raw, coincident, and anti-coincident gamma-ray modes. This paper presents a detailed overview of the X-ray/Gamma-ray Spectrometer and describes the science objectives, measurement objectives, instrument design, and shows some results from early in-flight data.     

Signatures of Coronal Hole Spectra Between 660 Å and 1460 Å Measured with Sumer on Soho

Spectra of the northern polar coronal hole measured with the SUMER spectrometer on SOHO on 25 October 1996 are analyzed. We present spectra taken at locations on the solar disk where part of the spectrometer slit intersects a polar coronal hole region and an area of brighter emission from outside of the coronal hole area. By comparing the line intensities between the parts of the spectrum taken inside the "dark" area of the coronal holes and the brighter regions, we work out the signatures of the specific coronal hole in the chromosphere, transition region and lower corona. We find that emissions of neutral atom lines, of which there are many in the spectrum of SUMER, show no difference between the coronal hole and the bright boundary areas, whereas all ionized species show strong intensity enhancements, including the continuum emissions of carbon and hydrogen. These enhancements are larger than in normal quiet Sun areas. This revised version was published online in June 2006 with corrections to the Cover Date.     

Vertical and radial metallicity gradients in high latitude galactic fields with SDSS

We used the ugr magnitudes of 1437467 F-G type main-sequence stars with metal abundance $-2?[\mathrm{Fe}/\mathrm{H}]?+0.2$ dex and estimated radial and vertical metallicity gradients for high Galactic-latitude fields, $50°<b?90°$ and $0°<l?360°$, of the Milky Way Galaxy. The radial metallicity gradient $d[\mathrm{Fe}/\mathrm{H}]/\mathit{dR}=-0.042\pm 0.011$ dex kpc^?1 estimated for the stars with $1.31<z\le 1.74$ kpc is attributed to the thin-disc population. While, the radial gradients evaluated for stars at higher vertical distances are close to zero indicating that the thick disc and halo have not undergone a radial collapse phase at least at high Galactic latitudes. The vertical metallicity gradients estimated for stars with three different Galactic latitudes, $50°<b?65°,65°<b?80°$ and $80°<b?90°$ do not show a strong indication for Galactic latitude dependence of our gradients. The thin disc, $0.5<z?2$ kpc, with a vertical metallicity gradient $d\left[\mathrm{Fe}/\mathrm{H}\right]/\mathit{dz}=-0.308\pm 0.018$ dex kpc^?1, is dominant only in galactocentric distance interval $6<R?10$ kpc, while the thick disc ($2<z?5$ kpc) could be observed in the intervals $6<R?10$ and $10<R?15$ kpc with compatible vertical metallicity gradients, i.e. $d\left[\mathrm{Fe}/\mathrm{H}\right]/\mathit{dz}=-0.164\pm 0.014$ dex kpc^?1 and $d\left[\mathrm{Fe}/\mathrm{H}\right]/\mathit{dz}=-0.172\pm 0.016$ dex kpc^?1. Five vertical metallicity gradients are estimated for the halo ($z>5$ kpc) in three galactocentric distance intervals, $6<R?10,10<R?15$ and $15<R?20$ kpc. The first one corresponding to the interval $6<R?10$ kpc is equal to $d\left[\mathrm{Fe}/\mathrm{H}\right]/\mathit{dz}=-0.023\pm 0.006$ dex kpc^?1, while the others at larger galactocentric distances are close to zero. We derived synthetic vertical metallicity gradients for 2,230,167 stars and compared them with the observed ones. There is a good agreement between the two sets of vertical metallicity gradients for the thin disc, while they are different for the thick disc. For the halo, the conspicuous difference corresponds to the galactocentric distance interval $6<R?10$ kpc, while they are compatible at higher galactocentric distance intervals.     

The Galactic Environment of the Sun: Interstellar Material Inside and Outside of the Heliosphere

Interstellar material (ISMa) is observed both inside and outside of the heliosphere. Relating these diverse sets of ISMa data provides a richer understanding of both the interstellar medium and the heliosphere. The galactic environment of the Sun is dominated by warm, low-density, partially ionized interstellar material consisting of atoms and dust grains. The properties of the heliosphere are dependent on the pressure, composition, radiation field, ionization, and magnetic field of ambient ISMa. The very low-density interior of the Local Bubble, combined with an expanding superbubble shell associated with star formation in the Scorpius-Centaurus Association, dominate the properties of the local interstellar medium (LISM). Once the heliosphere boundaries and interaction mechanisms are understood, interstellar gas, dust, pickup ions, and anomalous cosmic rays inside of the heliosphere can be directly compared to ISMa outside of the heliosphere. Our understanding of ISMa at the Sun is further enriched when the circumheliospheric interstellar material is compared to observations of other nearby ISMa and the overall context of our galactic environment. The IBEX mission will map the interaction region between the heliosphere and ISMa, and improve the accuracy of comparisons between ISMa inside and outside the heliosphere.     

B2-NiAl弹性性质Ag合金化效应的理论研究

采用第一原理赝势平面波方法和基于虚拟晶体势函数近似(VCA),计算了Ag合金化(浓度x＜1.0%,原子分数,下同)时完整与缺陷B2-NiAl晶体的弹性性质,并采用弹性常数C44,Cauchy压力参数(C12-C44)、弹性模量E、剪切模量G及其与体模量B0的比值G/B0等,表征和评判了Ag合金化浓度x对NiAl金属间化...     

Space weather and commercial airlines

Space weather phenomena can effect many areas of commercial airline operations including avionics, communications and GPS navigation systems. Of particular importance at present is the recently introduced EU legislation requiring the monitoring of aircrew radiation exposure, including any variations at aircraft altitudes due to solar activity. With the introduction of new ultra-long-haul “over-the-pole” routes, “more-electric” aircraft in the future, and the increasing use of satellites in the operation, the need for a better understanding of the space weather impacts on future airline operations becomes all the more compelling. This paper will present the various space weather effects, some provisional results of an ongoing 3-year study to monitor cosmic radiation in aircraft, and conclude by summarising some of the identified key operational issues, which must be addressed, with the help of the science community, if the airlines want to benefit from the availability of space weather services.     

Mammalian cell cultivation in space.

Equipment used in space for the cultivation of mammalian cells does not meet the usual standard of earth bound bioreactors. Thus, the development of a space worthy bioreactor is mandatory for two reasons: First, to investigate the effect on single cells of the space environment in general and microgravity conditions in particular, and second, to provide researchers on long term missions and the Space Station with cell material. However, expertise for this venture is not at hand. A small and simple device for animal cell culture experiments aboard Spacelab (Dynamic Cell Culture System; DCCS) was developed. It provides 2 cell culture chambers, one is operated as a batch system, the other one as a perfusion system. The cell chambers have a volume of 200 microliters. Medium exchange is achieved with an automatic osmotic pump. The system is neither mechanically stirred nor equipped with sensors. Oxygen for cell growth is provided by a gas chamber that is adjacent to the cell chambers. The oxygen gradient produced by the growing cells serves to maintain the oxygen influx by diffusion. Hamster kidney cells growing on microcarriers were used to test the biological performance of the DCCS. On ground tests suggest that this system is feasible.     

PANIC – A surface science package for the in situ characterization of a near-Earth asteroid

This paper presents the results of a mission concept study for an autonomous micro-scale surface lander also referred to as PANIC – the Pico Autonomous Near-Earth Asteroid In Situ Characterizer. The lander is based on the shape of a regular tetrahedron with an edge length of 35 cm, has a total mass of approximately 12 kg and utilizes hopping as a locomotion mechanism in microgravity. PANIC houses four scientific instruments in its proposed baseline configuration which enable the in situ characterization of an asteroid. It is carried by an interplanetary probe to its target and released to the surface after rendezvous. Detailed estimates of all critical subsystem parameters were derived to demonstrate the feasibility of this concept. The study illustrates that a small, simple landing element is a viable alternative to complex traditional lander concepts, adding a significant science return to any near-Earth asteroid (NEA) mission while meeting tight mass budget constraints.