计算机情报检索技术浅谈

文章对计算机情报检索技术中的方法及应用作了叙述。指出了文献检索中将会遇到的问题及解决的办法。给出了检索实例和结论。     

判断力权值的确定方法及AHP中群组判断矩阵的形成

在ＡＨＰ模型中，请一组专家对某一属性进行评价，根据专家的判断能力，给出判断力权值，再通过适当的数学处理方法，可得最优判断矩阵，这是ＡＨＰ中构造判断矩阵的一种新方法。     

马克思关于人的全面发展理论的解读

人的全面发展是马克思主义的最高价值追求,当前,我们处在社会主义初级阶段,不具备实现人的全面发展的现实条件,从现实的角度来看,人的和谐发展是马克思关于人的全面发展理论的时代内涵.     

模柄的设计探讨

系统地介绍模柄的主要参数、技术要求、设计技巧、结构形式以及选用原则，以便于设计应用。     

3-D position estimation of isolated target and optimal trajectory choice in parasitic synthetic aperture radar

Bistatic SAR (BSAR) systems have recently been the subject of several studies, but little attention has been given to the potential of the location of targets. In the paper, the performance of the estimation of 3-D position of a target (TPE) in parasitic SAR is obtained analytically and illustrated by computer simulation using ambiguity function analysis, and the maximum likelihood estimate (MLE) approach. It was shown that by using a multi look parasitic BSAR all three coordinates of an isolated point target (IPT) could be evaluated. Analytical closed form equations that characterize the measurement accuracy were derived. In the final these equations will be used to demonstrate various cases of more practical, including optimal trajectories choice under any geometry configuration case, moreover, the conclusion is verified via Matlab.     

两片TS101联合实现FFT运算

在综合分析 TS101内部结构和 FFF 算法的基础上,结合由两片TS101组成的信号处理板硬件平台的研制,提出了一个并行处理加多片联合来实现浮点复数 FFT 运算的方法,将一个比较大的 FFT 处理任务分配在多片上并行执行。经过对模拟数据的仿真分析,该方法在保证精确估计中心频率的前提下,较好地提高了运算速度。     

纤维增强复合材料电子束固化工艺

纤维增强复合材料电子束固化工艺采用电子加速器给电子以足够的能量使树脂体系发生交联反应而固化。该工艺不需要热压罐,可在室温下固化。从而降低模具费用,节省能源,减小制品中的热应力,制品综合性能好,是纤维增强复合材料低成本生产的一种新颖方法。电子束固化的基本条件是要有可被电子束固化的树脂体系和电子加速器,该方法已被用来生产大型空间运载器的结构部件。     

Passive target tracking using maximum likelihood estimation

Estimation of target trajectory from passive sonar bearings and frequency measurements in the presence of multivariate normally distributed noise, with unknown inhomogeneous general covariance, is modeled as a nonlinear multiresponse parameter estimation problem. It is shown that maximum likelihood estimation in this case is identical to optimizing a determinant criterion which has a concise form and contains no elements of unknown covariance matrix. A Gauss-Newton type algorithm using only the first-order derivatives of the model function and a new convergence criterion, is presented to implement such estimation. The simulation results demonstrate that performance of the maximum likelihood estimation method with the above noise model is superior to that with the traditional noise assumption     

星载嵌入式处理器软件在轨重配置技术研究

文章主要介绍了星载嵌入式处理器软件在轨重配置技术,给出了在轨重配置的基本原理、方法及处理流程。     

旋转带肋回转通道换热实验研究

为深入掌握高压涡轮叶片带肋回转通道在旋转状态下的换热分布,建立了旋转内通道实验系统,利用瞬态液晶测量方法研究了动叶回转内通道模型的换热机理,比较了三维数值模拟和实验的换热结果。通道入口雷诺数为5000~17000,旋转数为0~0.09,旋转半径与水力直径之比为46.4。结果表明:不同雷诺数下回转内通道的局部换热系数分布相似,局部、平均换热系数均随雷诺数增加而增大;沿程展向平均换热系数呈多波峰状分布,肋的扰动强化换热沿流向逐渐减弱;径向出流通道的努赛尔数随旋转数增加明显增大,径向入流通道的努赛尔数随旋转数的增加略有减小;哥氏力使转弯下游通道的局部换热系数改变,肋间的高换热区域由前肋的背风面附近向两肋之间偏移。