考虑应力-强度干涉的发动机管路设计方法

在静强度设计的基础上,根据应力-强度理论,对高压补燃液氧煤油发动机总装管路设计在考虑材料机械性能的不均匀和工作压力脉动的条件下,对动态可靠性进行了数学建模,提出了采用动态安全系数的校正方法。通过试验验证,这种方法能够保证发动机工作可靠性设计要求,为发动机管路设计提供了一种新的方法,也可以推广到其它结构件的设计当中。     

基于DMA的USB设备驱动及其动态链接库开发

用D river Stud io开发工具进行USB设备的驱动程序开发,并在VC6.0环境下编写USB设备的动态链接库,从而实现DMA传输。介绍W indows2000下的WDM驱动程序的体系结构,着重介绍基于DMA传输的USB设备驱动程序及其动态链接库的开发。     

ESA developments in life support technology: achievements and future priorities.

Following an enthusiastic start in 1985, ESA's life support technology development programme was re-assessed in the mid- to late-1990s to reflect the strong reduction in European manned space ambitions which occurred at that time. Further development was essentially restricted to activities that could constitute ISS upgrades or enhancements, or support ISS utilisation/operations, together with a single, limited, activity (MELISSA) aimed at bioregenerative life support, in the continuing hope that there might be "life after Station". The paper describes the current status of these activities and summarises the main priorities for future development that were identified at the April 1999 Workshop on Advanced Life Support.     

Radio fine structures in dm–cm wavelength range associated with magnetic reconnection processes

Radio bursts with fine structures in decimetric–centimetric wave range are generally believed to manifest the primary energy release process during flare/CME events. By spectropolarimeters in 1–2 GHz, 2.6–3.8 GHz, and 5.2–7.6 GHz at NAOC/Huairou with very high temporal (1.25–8 ms) and spectral (4–20 MHz) resolutions, the zebra patterns, spikes, and new types of radio fine structures with mixed frequency drift features are observed during several significant flare/CME events. In this paper we will discuss the occurrence of radio fine structures during the impulsive phase of flares and/or CME initiations, which may be connected to the magnetic reconnection processes.     

民用飞机复合材料结构制造工艺变化的等效性验证

高性能复合材料已经大量应用于民用运输飞机结构,并以飞机主制造商协同供应商的方式进行复合材料飞机结构的制造。介绍了航空器适航审定对复合材料结构制造的适航要求,引出了复合材料结构制造工艺变化的等效性验证方法。目前,复合材料结构制造工艺变化的等效性验证是通过所制造复合材料物理的、化学和基本力学的性能试验,并对试验结果进行统计分析来实现的。最后提供了等效性验证的接受准则。所述内容,对国内民用飞机复合材料结构在不同供应商处制造以及制造过程中工艺变化如何满足航空器适航审定要求提供借鉴;对其它行业复合材料结构制造的质量控制也有借鉴意义。     

Stability analysis of an aeroelastic system with friction

In this paper, harmonic balance method, exact formulation and numerical simulation method are adopted to study the effects of different friction stiffness on the stability of 1.5 degrees of freedom aeroelastic system. On this basis, the expressions of input energy and dissipated energy are deduced, and the energy method is used to reveal the mechanisms of the stable boundary and unstable boundary existing in the system and the effects of different friction stiffness on the stability of the system. Studies have shown that the stability region and the critical aerodynamic damping ratio of the system rise with the increase of the friction stiffness, while the friction stiffness has little effect on the stability boundary. In the analysis of the stability of system, the results of harmonic balance method, exact formulation and Newmark of numerical simulation method are in good agreement. Compared with exact formulation and numerical simulation method, the concept and conclusion of harmonic balance method are simple in the system stability analysis.     

航天器总装过程特种车辆运输问题的研究

文章针对航天器总装过程所涉及的特种车辆转运问题进行研究。通过对特种车辆种类和航天器各平台总装涉及特种车辆数量分析,提出集装箱运输方案并对集装箱进行设计、实施,取得了良好效果,同时指出集装箱化运输也是航天器工装运输的趋势。     

航天飞行器中舷窗温度场及换热的研究：外部界面处于第三类非线性边界条件

本文采用控制容积法,光线踪迹法结合谱带模型,研究航天飞机返回大气层时舷窗硅玻璃的非稳态复合换热。文章给出了界面S_2处于第三类非线性边界条件下,舷窗硅玻璃内部的温度场和进入机舱内部的热流密度。计算结果表明,如不考虑硅玻璃内部的辐射作用,对温度场影响不太大,但对进入机舱内的热流密度将会产生很大的误差。     

用高速纹影摄影技术观测自由面微物质的喷射

本文介绍了适于爆轰实验研究的透射式高速纹影仪。该设备具有较高的测试灵敏度。应用它观测了铅和钢样品自由面的微物质喷射现象,取得了好的结果。     

高教机天线布局影响通讯距离研究与改进

某型高级教练机在试飞中,出现空地通讯距离不满足战技指标要求的问题。经过分析发现,由于超短波电台天线作为单极天线,其安装布局未满足天线本身要求,即接地面尺寸过小、近场区环境复杂等,导致天线辐射性能受到影响。本文对天线阻抗和方向性系数进行了研究分析,并根据飞机情况制定相应的改进方案。